Search

The goal of this research is to create a perovskite ceramic with electrical and dielectric properties appropriate for energy storage, medical uses, and electronic devices. A bismuth ferric titanate, Bi0.7Ba0.3(FeTi)0.5O3, doped with barium and crystalline, was effectively synthesized at the A-site via sol–gel synthesis. A rhombohedral structure emerged in the R3́C space group, which was confirmed by room-temperature X-ray studies. An average grain size of 263 nm and a homogeneous grain distribution and chemical composition were confirmed by the results of scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). The study established a clear relationship between temperature, frequency, and the electrical properties of the material. Impedance spectroscopy and electrical modulus measurements, performed in the frequency range of 1 kHz to 1 MHz and at temperatures ranging from 200 K to 360 K, demonstrated a non-Debye type of relaxation. Furthermore, once the material was produced at various temperatures, its frequency-dependent electrical conductivity was examined using Jonscher's law. The results demonstrate that barium doping significantly improves the electrical conductivity and dielectric properties compared to pure BiFeTiO₃. Over the complete temperature range, consistent conduction and relaxation mechanisms were discovered. These findings suggest that the chemical may find widespread applicability across a broad temperature range, including electrical fields and capacitors. Highlights: Successful Synthesis: A perovskite ceramic, Bi0.7Ba0.3(FeTi)0.5O3, was synthesized using the sol–gel method, doped with barium at the A-site. Structural Properties: X-ray diffraction confirmed a rhombohedral structure in the R3́C space group, with an average grain size of 263 nm, as analyzed through SEM and EDX techniques. Enhanced Electrical and Dielectric Properties: Barium doping significantly improved the electrical conductivity and dielectric properties of the material compared to undoped BiFeTiO₃, making it suitable for energy storage and electronic applications. Non-Debye Relaxation Behavior: Impedance spectroscopy and electrical modulus analysis in the frequency range of 1 kHz to 1 MHz and temperature range of 200–360 K revealed non-Debye type relaxation. Wide Applicability: The study identified stable conduction and relaxation mechanisms over a broad temperature range, suggesting potential use in capacitors and electrical fields across various temperature conditions. [ABSTRACT FROM AUTHOR]

The ceramic Sr(NiNb)0.5O3, incorporating silver doping in the A site, was synthesized using a sol–gel route and subjected to comprehensive analysis through various experimental techniques. X-ray diffraction data analysis indicates a rhombohedral crystal structure. Scanning electron microscopy (SEM) examination reveals densely packed grains with minimal surface porosity. A thorough investigation of electrical properties, encompassing dielectric constant, loss tangent, electrical impedance, modulus, conductivity, etc., was conducted across a wide frequency range (103–106 Hz) and temperature range (260–340 K). This analysis provided valuable insights into structure–property relationships and conduction mechanisms. The discussion highlights the significance of interface effects, space charge polarization, and Maxwell–Wagner dielectric relaxation in achieving the material's high dielectric constant at low frequencies and elevated temperatures. Examination of temperature dependence through Nyquist plots elucidates the contributions of grain behavior to the material's resistive and capacitive properties. The dielectric permittivity, dissipation of energy, and electrical characteristics like impedance, modulus and conductivity are notably influenced by the frequency of the applied electric field and temperature. Overall, the material exhibits promising potential for industrial applications such as energy storage, given its intriguing properties. [ABSTRACT FROM AUTHOR]

This paper discusses the structural, microstructure and electrical properties of perovskite oxide lanthanum nickel LaNiO3, synthesized by the sol–gel reaction technique that was investigated. The prepared material was doped with bismuth and niobium and studied their properties. The Rietveld refinement of the X-ray diffraction pattern suggests that the compound has a monoclinic phase at room temperature with a P21/n space group. Scanning electron microscopy surface morphology analysis of the sample showed closed packing of grains with good density and very little porosity. The frequency-dependent modulus of the material is investigated in the temperature range from 200 K to 360 K and in range frequency between 1 kHz and 1 MHz. The Cole–Cole model is used to analyze the dielectric relaxation phenomenon. The complex impedance data are analyzed by an electrical equivalent circuit consisting of a resistance and a constant phase element, where the ideal capacitance part is replaced by a constant phase element. The frequency-dependent conductivity spectra follow the Jonscher power law. Nevertheless, the Arrhenius-type conduction mechanism was found to be active in the sample with activation energy of 0.168 eV. The electrical property of the sample was found to be independent of temperatures, making it a potential candidate for thermally stable capacitor application. [ABSTRACT FROM AUTHOR]