Search

The M13 bacteriophage, a nature-inspired environmentally friendly biomaterial, is used as a perovskite crystal growth template and a grain boundary passivator in perovskite solar cells. The amino groups and carboxyl groups of amino acids on the M13 bacteriophage surface function as Lewis bases, interacting with the perovskite materials. The M13 bacteriophage-added perovskite films show a larger grain size and reduced trap-sites compared with the reference perovskite films. In addition, the existence of the M13 bacteriophage induces light scattering effect, which enhances the light absorption particularly in the long-wavelength region around 825 nm. Both the passivation effect of the M13 bacteriophage coordinating to the perovskite defect sites and the light scattering effect intensify when the M13 virus-added perovskite precursor solution is heated at 90 °C prior to the film formation. Heating the solution denatures the M13 bacteriophage by breaking their inter- and intra-molecular bondings. The denatured M13 bacteriophage-added perovskite solar cells exhibit an efficiency of 20.1% while the reference devices give an efficiency of 17.8%. The great improvement in efficiency comes from all of the three photovoltaic parameters, namely short-circuit current, open-circuit voltage, and fill factor, which correspond to the perovskite grain size, trap-site passivation, and charge transport, respectively.

Double‐walled carbon nanotubes (DWNTs) have shown potential as promising alternatives to conventional transparent electrodes owing to their solution processability as well as high conductivity and transparency. However, their DC to optical conductivity ratio is limited by the surrounding surfactants that prevent the p‐doping of the DWNTs. To maximize the doping effectiveness, the surfactants are removed from the DWNTs, with negligible damage to the nanotubes, by calcination in an Ar atmosphere. The effective removal of the surfactants is characterized by various analyses, and the results show that the optimal calcination temperature is 400 °C. The conductivity of the DWNTs films improves when doped by triflic acid. While the conductivity increase of the surfactants‐wrapped DWNT films is 31.9%, the conductivity increase of the surfactants‐removed DWNT is found to be 59.7%. Using the surfactants‐removed, p‐doped, solution‐processed transparent electrodes, inverted‐type perovskite solar cells are fabricated, resulting in a power conversion efficiency of 17.7% without hysteresis. This work advances the application of DWNTs in transparent conductors, as the efficiency obtained is the highest value achieved to date for carbon nanotube electrode‐based perovskite solar cells and solution‐processable transparent electrode‐based solar cells. [ABSTRACT FROM AUTHOR]

Highlights from the article: Electrodes: High-Performance Solution-Processed Double-Walled Carbon Nanotube Transparent Electrode for Perovskite Solar Cells (Adv. Keywords: double-walled nanotubes; indium free; perovskite solar cells; solution-processed electrodes; transparent electrodes Double-walled nanotubes, indium free, perovskite solar cells, solution-processed electrodes, transparent electrodes.

Double‐walled carbon nanotubes are between single‐walled carbon nanotubes and multiwalled carbon nanotubes. They are comparable to single‐walled carbon nanotubes with respect to the light optical density, but their mechanical stability and solubility are higher. Exploiting such advantages, solution‐processed transparent electrodes are demonstrated using double‐walled carbon nanotubes and their application to perovskite solar cells is also demonstrated. Perovskite solar cells which harvest clean solar power have attracted a lot of attention as a next‐generation renewable energy source. However, their eco‐friendliness, cost, and flexibility are limited by the use of transparent oxide conductors, which are inflexible, difficult to fabricate, and made up of expensive rare metals. Solution‐processed double‐walled carbon nanotubes can replace conventional transparent electrodes to resolve such issues. Perovskite solar cells using the double‐walled carbon nanotube transparent electrodes produce an operating power conversion efficiency of 17.2% without hysteresis. As the first solution‐processed electrode‐based perovskite solar cells, this work will pave the pathway to the large‐size, low‐cost, and eco‐friendly solar devices. [ABSTRACT FROM AUTHOR]