Search

This article presents an injection-locked (IL) ring-oscillator-based fractional- ${N}$ digital phase locked loop (DPLL) supporting Bluetooth low energy (BLE) frequency modulation with an frequency-shift keying (FSK) error between 2.4% and 3.3%. As the fractional spur cannot be suppressed by IL-DPLL, this work proposes a random edge injection (REI) to reduce the spur. This technique also speeds up the convergence time of gain calibration of the digital-to-time converter (DTC). Furthermore, the proposed background calibration schemes allow the DPLL to achieve stable performance across all BLE channels, including both integer- ${N}$ and fractional- ${N}$ channels. This work was fabricated in the 40-nm CMOS technology occupying a 0.09-mm2 area. A fractional spur of −44 dBc and a reference spur of are achieved while consuming 2.76 mW when REI is activated. The background calibrations also ensure stable performance across BLE channels. [ABSTRACT FROM AUTHOR]

This paper presents an energy-/area-efficient digitally controlled oscillator (DCO)-based phase-tracking Receiver for Internet-of-Things (IoT) applications. The RX leverages the constant-envelope nature of frequency shift keying modulation adopted in many IoT protocols, e.g., IEEE802.15.4 and Bluetooth low energy (BLE), to enhance the energy efficiency and to reduce the chip area. The proposed RX, with the DCO acting as a local oscillator (LO) and binary frequency feedback, promotes low-power and low-voltage circuit design, while a data-aided carrier-frequency tracking ensures the received carrier stability without a power-/area-hungry phase-locked loop (PLL). The RX avoids a compromise between a power-hungry I/Q LO generation and the image rejection in traditional RXs. An equivalent mathematical model is further presented, which helps to analyze and optimize the frequency response of the proposed RX. Fabricated in 40-nm CMOS, the RX consumes 1.55 mW from a 0.85-V supply and has a −87-dBm sensitivity at 2 Mb/s, which leads to a 0.77-nJ/b energy efficiency and 178-dB RX sensitivity FoM. [ABSTRACT FROM AUTHOR]

A continuous wave Doppler radar, operating as a phase-locked-loop in phase demodulator configuration, is proposed and in vivo demonstrated for noncontact vital signs monitoring. The radar architecture exhibits a unique precision in tracking the phase modulation caused by human cardiopulmonary activity from which heartbeat and respiration can simultaneously be extracted. The single mixer architecture is immune to the null point and does not require small-angle approximation conditions, which distinguishes it from pre-existing other approaches. This enables the proposed radar to behave highly linear, with very precise detection of phase modulations induced by any kind of movement, independently from amplitude and speed. After simulations and technical tests to validate functionality and safety of the proposed architecture, a practical setup was demonstrated on human volunteers. Wavelet independent component analysis was applied to successfully retrieve respiratory and heart rate information from the radar baseband signal. [ABSTRACT FROM AUTHOR]

A Doppler radar operating as a Phase-Locked-Loop (PLL) in frequency demodulator configuration is presented and discussed. The proposed radar presents a unique architecture, using a single channel mixer, and allows to detect contactless vital signs parameters while solving the null point issue and without requiring the small angle approximation condition. Spectral analysis, simulations, and experimental results are presented and detailed to demonstrate the feasibility and the operational principle of the proposed radar architecture. [ABSTRACT FROM PUBLISHER]

This article discusses the radio system requirements and design trade-offs of a low-power 2.3/2.4 GHz IEEE 802.15.6-narrowband transmitter for body area network applications. The IEEE 802.15.6 narrowband PHY adopts nonconstant envelope DPSK modulations. Transmitter architecture selection is a major challenge because it needs to provide both amplitude and phase modulation, with good efficiency and strict requirements on modulation accuracy and linearity for non-constant envelope modulations. A PLL-based polar transmitter with a Sigma-Delta digitally controlled power amplifier (SD-DPA) is employed for its excellent energy efficiency. Finally, this article discusses the circuit design considerations and implementation results. With balance between analog and digital implementation, and careful planning of the radio system, the polar transmitter presented in this article can meet all of the specifications defined in IEEE 802.15.6 with abundant margin, while having extremely low power consumption of 5.4 mW and excellent energy efficiency of 5.4 nJ/bit. [ABSTRACT FROM PUBLISHER]