Search

• Sequential droplet impact with grain growth and impingement is modelled. • Typical velocities of crystal growth are within 2 m/s. • Solidification time of a single splat on a stainless steel substrate is about 0.5 μs. • The undercooling in crystal growth ranges approximately from 150 K to 500 K. A coupled CFD and diffuse interface model was developed to predict the dynamic process of solidification microstructure formation of sequential yttria-stabilized zirconia (YSZ) droplet impact under supersonic plasma spraying. The numerical model relies on the explicit finite difference solution of the Navier-Stokes and energy balance equations, coupled with the Cahn-Hilliard equation, to track liquid-gas interface, and of a phase field model for solidification microstructure formation involving polycrystalline growth to trace solid-liquid interface. Extensive simulations, differing in the status of the first droplet and the impacting parameters of the second one, were carried out. The results reveal that solidification microstructure still follows a columnar pattern if the second droplet lands on the first that is just starting spreading, and that the growth direction around the contact region in the second splat will be obviously skewed by fluid flow if the first has been solidified, owing to earlier and easier nucleation on the top surface of the first splat, thus confirming the epitaxial growth across the splat-splat interface. Computed results are also compared with thermal spray experiments, with gratifying agreement obtained. [ABSTRACT FROM AUTHOR]

• The solution of the Cahn-Hilliard equation to track moving liquid-gas boundaries. • A phase field model for polycrystalline growth used to track solid-liquid interface and grain boundaries. • Supersonic YSZ droplet impact considered. • Convection effect on solidification microstructure investigated. A comprehensive numerical model has been developed, which is capable of representing the impact and spreading of a high-velocity yttria-stabilized zirconia (YSZ) molten droplet with microstructure formation in plasma thermal spraying processes. The numerical model entails the explicit finite difference solution of the Navier-Stokes equations and the energy balance equations, coupled with the Cahn-Hilliard equation to track the liquid-gas two phase interface and with a phase field model for solidification microstructure formation involving the polycrystalline growth. Numerical model procedures are given. The model, after being checked for mesh-independence, was applied to study the spreading and solidification of a high-temperature high-velocity YSZ droplet impinging upon a preheated substrate surface under the conditions typical of supersonic plasma thermal spraying processes. Extensive numerical simulations were carried out and results reveal that the solidification microstructure formed in the spreading droplet consists primarily of columnar grains. Computed results are also compared with thermal spray experiments, and gratifying agreement is obtained. [ABSTRACT FROM AUTHOR]