Search

[Display omitted] • Novel MM–TCMRs were synthesized for concurrent removal of phosphate and ammonium. • MM–TCMRs exhibits excellent phosphate and ammonium adsorption capacity. • Potential phosphate and ammonium removal mechanism with MM–TCMRs was proposed. • >70 % phosphate and ammonium were recovered from swine wastewater after four cycles. • Nutrient–loaded MM–TCMRs is applied as a fertilizer to promote alfalfa growth. Magnetic magnesium (Mg)–loaded Chinese herbal medicine residues (MM–TCMRs) were fabricated to simultaneously remove and recover phosphate and ammonium from wastewater. The MM–TCMRs exhibited larger specific surfaces and rougher structures with massive spherical particles than those of original residues. They could be separated by adjusting the magnetic field. The phosphate and ammonium adsorption by MM–TCMRs were matched with the pseudo–second–order model, while the Langmuir model yielded the maximum adsorption capacities of 635.35 and 615.57 mg g−1, respectively. Struvite precipitation on the MM–TCMRs surface was the primary removal mechanism with electrostatic attraction, ligand exchange, intra–particle diffusion, and ion exchange also involved. The recyclability of MM–TCMRs confirmed their good structural stability. More importantly, the nutrient–loaded MM–TCMRs enhanced alfalfa growth and improved soil fertility in planting experiments. Collectively, the MM–TCMRs are promising candidates for nutrient removal and recovery from wastewater. [ABSTRACT FROM AUTHOR]

The cost–effective removal and recovery of phosphate from wastewater is of great importance to controlling eutrophication and alleviating the phosphorus resource exhaustion crisis. Herein, chitosan (Cs) encapsulated bimetallic lanthanum (La) and iron (Fe) metal(hydro) oxides (La/Fe–Cs) composites were fabricated using a co–precipitated method for enhanced phosphate removal and recovery. The La/Fe–Cs composites had rough and raised spongy–like surfaces coated with La/Fe (hydr)oxide particles with a high specific surface area of 109.84 m2 g−1, providing more potential binding sites for phosphate capture. The La/Fe–Cs composites with a 1:2 La–to–Fe molar ratio exhibited a maximum adsorption capacity of 67.52 mg g−1 for phosphate at 308 K, calculated using the Langmuir model, which was 211% higher than that of monometallic Fe–Cs composites. Meanwhile, this composite also showed a high phosphate removal rate (63–95%) in an extensive applicable pH range (3.00–10.00) and rapid adsorption within 10 min (up to 94%). Moreover, the adsorption of phosphate by La/Fe–Cs composites was mildly disturbed against co–existing ions of NO 3 −, Cl−, and humic acid, while adsorption capacities were reduced by almost 13–45% with the existence of SO 4 2−, HCO 3 −, and CO 3 2−. The FTIR, XPS, and DFT results suggested that La–doped facilitated phosphate removal and the predominant mechanisms involved electrostatic interaction, surface precipitation, and inner–sphere complexation processes. Additionally, La/Fe–Cs composites also illustrated excellent efficiencies in simultaneous scavenging phosphate and ammonia from eutrophication and poultry wastewater. These results highlight bimetallic La/Fe–Cs composites are promising candidates for efficient elimination and recovery of phosphate from real wastewater, and subsequently could be used as slow–release fertilizers or soil amendments. [Display omitted] •Bimetallic La/Fe–Cs composites were synthesized for phosphate removal. • The derived bimetallic La/Fe–Cs composites showed excellent phosphate adsorption capacity of 67.52 mg g−1 • Mechanisms driving phosphates adsorbed onto the La/Fe–Cs composites were elucidated by FTIR, XPS, and DFT. • High efficiency in scavenging phosphate from eutrophication wastewater and poultry wastewater. • The phosphate–loden La/Fe–Cs composites can be used as slow–release fertilizers or soil amendments. [ABSTRACT FROM AUTHOR]

The cost–effective removal and recovery of phosphate from wastewater is of great importance to controlling eutrophication and alleviating the phosphorus resource exhaustion crisis. Herein, chitosan (Cs) encapsulated bimetallic lanthanum (La) and iron (Fe) metal(hydro) oxides (La/Fe–Cs) composites were fabricated using a co–precipitated method for enhanced phosphate removal and recovery. The La/Fe–Cs composites had rough and raised spongy–like surfaces coated with La/Fe (hydr)oxide particles with a high specific surface area of 109.84 m2 g−1, providing more potential binding sites for phosphate capture. The La/Fe–Cs composites with a 1:2 La–to–Fe molar ratio exhibited a maximum adsorption capacity of 67.52 mg g−1 for phosphate at 308 K, calculated using the Langmuir model, which was 211% higher than that of monometallic Fe–Cs composites. Meanwhile, this composite also showed a high phosphate removal rate (63–95%) in an extensive applicable pH range (3.00–10.00) and rapid adsorption within 10 min (up to 94%). Moreover, the adsorption of phosphate by La/Fe–Cs composites was mildly disturbed against co–existing ions of NO 3 −, Cl−, and humic acid, while adsorption capacities were reduced by almost 13–45% with the existence of SO 4 2−, HCO 3 −, and CO 3 2−. The FTIR, XPS, and DFT results suggested that La–doped facilitated phosphate removal and the predominant mechanisms involved electrostatic interaction, surface precipitation, and inner–sphere complexation processes. Additionally, La/Fe–Cs composites also illustrated excellent efficiencies in simultaneous scavenging phosphate and ammonia from eutrophication and poultry wastewater. These results highlight bimetallic La/Fe–Cs composites are promising candidates for efficient elimination and recovery of phosphate from real wastewater, and subsequently could be used as slow–release fertilizers or soil amendments. [Display omitted] •Bimetallic La/Fe–Cs composites were synthesized for phosphate removal. • The derived bimetallic La/Fe–Cs composites showed excellent phosphate adsorption capacity of 67.52 mg g−1 • Mechanisms driving phosphates adsorbed onto the La/Fe–Cs composites were elucidated by FTIR, XPS, and DFT. • High efficiency in scavenging phosphate from eutrophication wastewater and poultry wastewater. • The phosphate–loden La/Fe–Cs composites can be used as slow–release fertilizers or soil amendments. [ABSTRACT FROM AUTHOR]