Search

[Display omitted] Converting CO 2 into chemicals and fuels by solar energy can alleviate global warming and solve the energy crisis. In this work, CoAl-LDO/MoO 3−x (LDO/MO) composites were successfully prepared and achieved efficient CO 2 reduction under visible light. The CoAl-layered double oxides (CoAl-LDO) evolved from CoAl-layered double hydroxide (CoAl-LDH) exhibited a more robust structure, broader light absorption, and improved CO 2 adsorption ability. The local surface plasmon resonance (LSPR) effect excited by nonstoichiometric MoO 3−x broadened the photo-response range of CoAl-LDO/MoO 3−x. In addition, constructing step-scheme (S-scheme) heterojunctions could simultaneously optimize the migration mechanism of photogenerated electrons and holes, and retain carriers with strong redox ability. Therefore, the production rates of CO and CH 4 on the optimal LDO/MO composite were 7 and 9 times higher than the pristine CoAl-LDH, respectively. This work hybridizes oxidation photocatalysts and LDO-based materials to optimize the charge separation and migration mechanisms, which guides the modification of LDO-based materials. [ABSTRACT FROM AUTHOR]

In this research, a ternary Cu-CuTCPP/Cu2O/CoAl-LDH composite with a dual Z-scheme heterostructure was fabricated based on a Cu2O photocatalyst and applied in photocatalytic CO2 reduction. The physicochemical properties of the prepared catalysts and the possible reaction mechanism in CO2 reduction were analyzed and studied by various characterization methods. The activity of CO2 reduction significantly increased, especially forming C2 products. The optimal yield of C2H4 and C2H6 reached 1.56 and 1.92 μmol g−1 h−1 respectively, which was 14.45 and 17.45 times that from using the Cu2O monomer. In addition, the selectivity of C2 products reached 37.4%. The satisfactory C2 yield was mainly due to the fact that Cu1+δ2(COO)3 nodes in Cu-CuTCPP contained adjacent Cu sites, which effectively promoted the C–C coupling reaction. Moreover, the dual Z-scheme heterojunction stimulated the separation of photogenerated electron–hole pairs and diminished the recombination rate. This work contributes to the development of novel photocatalysts with a dual Z-scheme heterojunction and facilitates the generation of valuable C2 products. [ABSTRACT FROM AUTHOR]

The photocatalytic reduction of CO2 to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu2O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu2O showed optimal photocatalytic performance. The CO and CH4 yields over 25% BiOCl/C/Cu2O reached 26.77 and 9.86 μmol g−1 h−1, which is 2.9 and 8.7 times higher than that of the pristine Cu2O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium. [ABSTRACT FROM AUTHOR]

Photocatalytic reduction of CO 2 is a considerable method to alleviate global warming and energy shortage. In this work, CoAl-LDH/Ni 1 Cu NP nitrogen-doped carbon composites (CA/Ni 1 Cu NP N-C) can efficiently reduce CO 2 into CO, CH 4 , and C 2 H 6 under visible light. In situ characterization techniques and theoretical calculations were employed to investigate the CO 2 evolution pathway and photocatalytic mechanism. The synergistic interaction of Cu nanoparticles and Ni single-atom sites accelerated the photogenerated charge separation and facilitated the adsorption properties of key intermediates. As a result, the yields of CH 4 and C 2 H 6 on CA/Ni 1 Cu NP N-C were achieved up to 35.245 and 25.328 μmol g−1 h−1 with electron selectivity of 40.24% and 50.61%, respectively. This work is instructive for using metal nanoparticles to optimize single-atom catalysts to promote their catalytic activity. [Display omitted] • CoAl-LDH/Ni 1 Cu NP N-C single-atom photocatalysts were synthesized. • The yields of CH 4 and C 2 H 6 were 35.245 (40.24%) and 25.328 (50.61%) μmol g−1 h−1. • The charge transfer mechanism and CO 2 evolution path were investigated. • Synergistic interaction of Cu NP and Ni 1 sites optimized the photocatalytic mechanism. [ABSTRACT FROM AUTHOR]

[Display omitted] • The CoAl-LDH/CGCNN-Metal NPs ternary photocatalysts with visible light response were prepared. • CoAl-LDH/CGCNN-Au NPs could convert CO 2 into CO, CH 4 , C 2 H 4 , and C 2 H 6 with the yields of 5.93, 17.68, 1.25 and 2.15 µmol g−1h−1. • The synergistic effect between S-scheme heterojunction and metal NPs could improve the light absorption capacity and the separation of photogenerated electron-hole pairs. Converting CO 2 into high-value products by photocatalysis can alleviate the global greenhouse effect and energy crisis. In this work, CoAl-LDH/CGCNN-Metal NPs (AC-M) ternary photocatalysts were synthesized by calcination, hydrothermal, and ultrasonic self-assembly methods. In pure water, the best sample AC-Au could convert CO 2 into CO, CH 4 , C 2 H 4 , and C 2 H 6 with the yields of 5.93, 17.68, 1.25 and 2.15 µmol g−1h−1, respectively, and exhibited good stability within 5 cycles (30 h). The synergistic effect between S-scheme heterojunction and metal NPs could broaden the composite's photo-response range and promote the separation of photogenerated carriers. Furthermore, the metal NPs could also serve as the electron-rich centers to improve the chemisorption of CO 2 and convert it into C 1 and C 2 products under visible light. This work can provide meaningful guidance for studying the efficient reduction of CO 2 to C 1 and C 2 products by S-scheme heterojunction/metal NPs ternary photocatalytic system. [ABSTRACT FROM AUTHOR]

The photocatalytic reduction of CO2 to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu2O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu2O showed optimal photocatalytic performance. The CO and CH4 yields over 25% BiOCl/C/Cu2O reached 26.77 and 9.86 μmol g−1 h−1, which is 2.9 and 8.7 times higher than that of the pristine Cu2O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium. [ABSTRACT FROM AUTHOR]

• The B-TiO 2 /CuInS 2 Z-scheme heterojunction with visible light response was prepared. • B-TiO 2 /CuInS 2 could convert CO 2 into CO and CH 4 with the yields 21.39 and 4.83 µmol g−1 h−1. • Both boron doping and CuInS 2 sensitization can effectively improve the utilization of visible light. • The synergistic effect of B doping Z-scheme heterojunction optimized the separation and migration of photogenerated carriers. Photocatalytic reduction CO 2 into valuable solar fuels is a promising strategy to alleviate the greenhouse effect and the energy crisis on Earth. In this work, a B-TiO 2 /CuInS 2 photocatalyst has been synthesized through a simple hydrothermal-calcination method for efficient reducing CO 2 into CO and CH 4. Boron doping and sensitization of CuInS 2 ensure the excellent visible light response capacity of the composite catalyst. The synergistic effect between oxygen vacancies and Z-scheme heterojunction also endow the photocatalyst with strong carrier separation capability. Consequently, the optimized B-TO/CIS-2.5 sample exhibited the best CO (21.39 μmol g−1 h−1) and CH 4 (4.83 μmol g−1 h−1) production, approximately 9 and 14 times higher than that of TO and B-TO, respectively. This study provides a reliable approach for developing photocatalysts with boosted CO 2 reduction activity and high stability. [ABSTRACT FROM AUTHOR]