Search

Anticancer treatment is performed in various ways, and photothermal therapy (PTT) is gaining traction from a noninvasive treatment perspective. PTT is a treatment technique based on the photothermal effect that kills tumors by increasing their temperature. In this study, gold nanoparticles (AuNPs), which are photothermal agents, were used in numerical simulations to determine the PTT effect by considering diffusion induced changes in the distribution area of the AuNPs. The treatment effect was confirmed by varying the initial injection radius of AuNPs represented by the injection volume, the elapsed time after injection of AuNPs, and the laser intensity. The degree of maintenance of the apoptotic temperature band in the tumor was quantitatively analyzed by the apoptotic variable. Ultimately, if the initial injection radius of AuNPs is 0.7 mm or less, the optimal time to start treatment is 240 min after injection, and for 1.0 and 1.2 mm, it is optimal to start treatment when the elapsed time after injection is 90 and 30 min, respectively. This study identified the optimal treatment conditions for dosage of AuNPs and treatment start time in PTT using AuNPs, which will serve as a reference point for future PTT studies. [ABSTRACT FROM AUTHOR]

In recent years, dental implants have become increasingly popular around the world. However, if the implant is not properly managed, inflammation may occur, and the implant itself may need to be removed. Peri-implantitis is a common inflammation that occurs in dental implants, and various laser treatments have recently been studied to eliminate it. In this study, the situation of removing peri-implantitis using photothermal therapy, one of the various laser treatments, was analyzed theoretically and numerically. The temperature distribution in the tissue for various laser irradiation locations, angles, and power was calculated based on heat transfer theory, and the degree of thermal damage to tissue was analyzed using the Arrhenius damage integral. In addition, the thermally damaged region ratio of inflamed and normal tissue was analyzed using the Arrhenius thermal damage ratio and normal tissue Arrhenius thermal damage ratio to confirm the trend of treatment results for each treatment condition. The results of the study showed that if only the thermal damage to the inflamed tissue is considered, the laser should be angled vertically, and the laser should be applied to the center of the inflamed tissue rather than close to the implant. However, if the thermal damage to the surrounding normal tissue is also considered, it was found that the laser should be applied at 1.0 mm from the right end of the inflamed tissue for maximum effect. This will allow for more accurate clinical treatment of peri-implantitis in the future. [ABSTRACT FROM AUTHOR]

Purpose: Dental implants have been successfully implemented as a treatment for tooth loss. However, peri-implantitis, an inflammatory reaction owing to microbial deposition around the implant, can lead to implant failure. So, it is necessary to treat peri-implantitis. Therefore, this numerical study is aimed at investigating conditions for treating peri-implantitis. Methods: Photothermal therapy, a laser treatment method, utilizes photothermal effect, in which light is converted to heat. This technique has advantage of selectively curing inflamed tissues by increasing their temperature. Accordingly, herein, photothermal effect on peri-implantitis is studied through numerical analysis with using Arrhenius damage integral and Arrhenius thermal damage ratio. Results: Through numerical analysis on peri-implantitis treatment, we explored temperature changes under varied laser settings (laser power, radius, irradiation time). We obtained the temperature distribution on interface of artificial tooth root and inflammation and determined whether temperature exceeds or does not exceed 47℃ to know which laser power affects alveolar bone indirectly. We defined the Arrhenius thermal damage ratio as a variable and determined that the maximum laser power that does not exceed 47℃ at the AA' line is 1.0 W. Additionally, we found that the value of the Arrhenius thermal damage ratio is 0.26 for a laser irradiation time of 100 s and 0.50 for 500 s. Conclusion: The result of this numerical study indicates that the Arrhenius thermal damage ratio can be used as a standard for determining the treatment conditions to help assisted laser treatment for peri-implantitis in each numerical analysis scenario. [ABSTRACT FROM AUTHOR]

Lasers are used in various fields, however, in the medical field, they are mainly used for incision or chemotherapy. Photothermal therapy (PTT) is an anti-cancer treatment technique that uses lasers and the photothermal effect to increase the temperature of tumor tissue and induce its death. In this study, the therapeutic effect of PTT using gold nanoparticles as a photothermal converter was analyzed numerically for the occurrence of squamous cell carcinoma inside a skin section consisting four layers. Numerical modeling was implemented to calculate the temperature distribution inside the biological tissue while varying the distribution radius of gold nanoparticles in the tumor tissue, the number of injections, and the intensity of the irradiating laser. For the given situation, the optimal treatment effect was observed when the distribution radius ratio of the injected gold nanoparticles (GNPs) was 1, the number of injections was 7, and the intensity of the irradiated laser was 52 mW. Three apoptotic variables were used to quantitively evaluate the effect of PTT in each case and thus suggest the optimal treatment effect. However, although the temperature range at which apoptosis occurs is known, the maintenance of that temperature range is still under research and the temporal influence of apoptosis remains to be determined. [ABSTRACT FROM AUTHOR]

Recently, the incidence of skin cancer has been increasing owing to the development of science and technology and the increase in outdoor activities. Research on photothermal therapy as a treatment technique for similar skin cancer is in progress. Photothermal therapy is a treatment technique that removes tumor tissue by increasing the temperature. It has the advantage of rapid recovery and a low risk of secondary infection. In this study, a numerical investigation of photothermal therapy based on heat transfer is conducted on squamous cell carcinoma present inside the skin layer. Analysis is performed by varying the number of injections of gold nanoparticles, volume fraction of gold nanoparticles in the tumor, and laser intensity. In addition, conditions for maximizing expression of apoptosis in the tumor and minimizing amount of thermal damage to surrounding normal tissues are identified through the variable which is apoptosis retention ratio, thermal hazard value and effective apoptosis retention ratio. It was confirmed that the optimal therapeutic effect was shown when the volume fraction of injected GNPs was 10−3, the number of injections was 6 times, and the irradiated laser intensity was 140 mW for the tumor presented in this study. Ultimately, these results are expected to accelerate the commercialization of photothermal therapy. [ABSTRACT FROM AUTHOR]

Photothermal therapy is a new chemotherapy technique using photothermal effects, a phenomenon in which light energy is converted into thermal energy. Since the treatment technique is performed without surgical incision, it does not cause bleeding and patients are expected to make rapid recoveries, which are significant advantages. In this study, photothermal therapy with direct injection of gold nanoparticles into tumor tissue was simulated through numerical modeling. The treatment effect resulting from changing the intensity of the irradiated laser, volume fraction of the injected gold nanoparticles, and number of gold nanoparticle injections was quantitatively evaluated. The discrete dipole approximation method was applied to calculate the optical properties of the entire medium, and the Monte Carlo method was applied to identify the absorption and scattering behavior of lasers in tissue. In addition, by confirming the temperature distribution of the entire medium through the calculated light absorption distribution, the treatment effect of photothermal therapy was evaluated, and the optimal treatment conditions were suggested. This is expected to accelerate the popularization of photothermal therapy in the future. [ABSTRACT FROM AUTHOR]

Photothermal therapy is a treatment technique that has attracted attention as an alternative to conventional surgical techniques. It is based on the photothermal effect, wherein light energy is converted into thermal energy, and facilitates rapid recovery after treatment. This study employed various laser irradiation conditions and presented conditions with the optimal treatment effects through a numerical analysis based on heat transfer. A skin layer comprising four stages containing squamous cell carcinoma was targeted, and the treatment effect was confirmed by varying the heating conditions of the laser and volume fraction of gold nanoparticles. The therapeutic effect was confirmed through both the apoptosis retention ratio, which quantitatively estimated the degree of maintenance of the apoptosis temperature range within the tumor, and the thermal hazard retention value, which quantitatively calculates the amount of thermal damage to the surrounding normal tissues. Finally, the optimal treatment conditions were determined based on the laser intensity, cooling time ratio, and volume fraction of injected gold nanoparticles through numerical analysis. [ABSTRACT FROM AUTHOR]

The photothermal effect refers to a phenomenon in which light energy is converted into heat energy, and in the medical field, therapeutics based on this phenomenon are used for anticancer treatment. A new treatment technique called photothermal therapy kills tumor tissue through a temperature increase and has the advantages of no bleeding and fast recovery. In this study, the results of photothermal therapy for squamous cell carcinoma in the skin layer were analyzed numerically for different laser profiles, intensities, and radii and various concentrations of gold nanoparticles (AuNPs). According to the heat-transfer theory, the temperature distribution in the tissue was calculated for the conditions under which photothermal therapy was performed, and the therapeutic effect was quantitatively confirmed through three apoptotic variables. In addition, the laser intensity and the volume fraction of AuNPs were optimized, and the results provide useful criteria for optimizing the treatment effects in photothermal therapy. [ABSTRACT FROM AUTHOR]

As the display industry continues to advance, various new materials are being developed for utilizing microtechnology and nanotechnology in display panels. Among these, transparent materials have been widely applied to the internal wiring of displays and flexible substrates, owing to their high optical transmittance, isotropy, and anisotropy. Thus, measurement of the thermophysical properties of various transparent materials is important. This study measured thermal conductivity by selecting quartz, a transparent isotropic material, and sapphire glass, a transparent anisotropic material, as measurement target materials using a rear-side photothermal deflection method. Measurements were made via a three-dimensional unsteady heat conduction equation, to which complex transformation was applied and numerically analyzed using COMSOL Multiphysics. Phase delays for a pump beam and a probe beam for a relative position were derived through a deflection analysis. From the derived phase delays between the numerical analysis and experimental result with optical alignment, the absolute and relative errors of quartz were appropriately confirmed to be 0.069 W/m-K and 5%, respectively, while those of the sapphire glass were likewise confirmed to be 0.55 W/m-K and 1.5%, respectively. [ABSTRACT FROM AUTHOR]

The incidence of skin cancer is increasing with the recent increase in UV exposure. The treatment of skin cancer generally proceeds through an excision of the tumor area, which causes bleeding into the affected area and surrounding tissues, and there is a possibility that secondary infection may occur. Photothermal therapy is drawing attention as an alternative treatment to overcome this limitation. In this study, a numerical analysis was performed on skin cancer tumors located between the reticular dermis and the skin surface by applying the Monte Carlo method. The numerical analysis derives a quantitative correlation using an effective apoptosis ratio with respect to the intensity of the laser that produces the optimal photothermal therapy effect and the volume fraction of gold nanorods (GNRs) injected into a tumor. Through this study, it is confirmed that the optimal treatment effect exists for the depth and length of the various tumors, the intensity of the laser, and the volume fraction of GNRs to minimize the thermal damage to the surrounding normal tissues while maximizing the apoptosis in the tumor. It is expected that it can be used as an optimal condition for better treatment while performing photothermal therapy in the future. [ABSTRACT FROM AUTHOR]

Nanosized materials are used in various industries, depending on their production form. In the medical field, nanosized particles are used for treatment. Among various treatment techniques, photothermal therapy (PTT) uses nanoparticles as photothermal agents (PTAs). In this study, the effectiveness of PTT using noble-metal PTAs with various materials and radii was analyzed using numerical analysis. For squamous cell carcinoma within the skin layer, the thermal behavior of the medium was analyzed when PTT was performed by varying the material and radius of the noble-metal PTAs, the volume fraction of the injected PTAs, and the intensity of the irradiating laser. The optical properties of the PTAs and tissue and the temperature distribution in the tissue under laser irradiation were calculated using the discrete dipole approximation method, the Dombrovsky relation, and the Pennes bioheat equation. In addition, an apoptotic variable was derived based on the calculated temperature distribution, and the optimal treatment conditions for each PTAs material were analyzed. The results of the study showed that the maximum therapeutic effect was achieved at a volume fraction of 10−6 and laser intensity of 0.16 W when all PTAs were used, and the difference in therapeutic effect was insignificant with respect to the radius of the nanoparticles. Accordingly, an accurate PTT can be performed using each PTAs material if the proposed treatment conditions are applied. • Optimization of treatment conditions for skin cancer photothermal therapy. • Squamous cell carcinoma presented in tumor. • Effective apoptosis retention ratio for optimization of photothermal therapy. • Various noble-metal nanoparticles for photothermal agents. • Numerical analysis based on heat transfer to induce apoptosis in tumor. [ABSTRACT FROM AUTHOR]

• Optimization of treatment conditions for skin cancer photothermal therapy. • Multiple blood vessels presented in tumor by angiogenesis. • Effective apoptosis retention ratio for optimal photothermal therapy was determined. • Numerical analysis based on heat transfer to induce apoptosis was conducted. • Tumor apoptosis and thermal damage to surrounding normal tissue were quantified. In recent years, lasers have gained considerable attention as a potential treatment option in the medical field. Photothermal therapy, in particular, has been investigated as a technique to remove tumor tissue by leveraging photothermal effects. The method involves raising the temperature of the tumor tissue to destroy it and has primarily been studied for skin cancer treatment. This study aimed to simulate a skin layer with squamous cell carcinoma by using numerical modeling and investigate the effect of different numbers of blood vessels on the temperature distribution in the medium under conditions such as varied laser intensity and gold nanoparticle volume fraction. Optical properties of the light absorption enhancer were calculated using the discrete dipole approximation method, and the temperature and velocity distribution were computed using continuity, momentum, and energy equations. Quantitative determination of the apoptotic variable was performed to evaluate the treatment effect for each case, and the treatment condition with the maximum treatment effect was identified. Laser intensity with optimal therapeutic effect was confirmed to be 0.13 W, 0.15 W, 0.18 W, and 0.24 W, depending on the number of vessels, respectively, and the volume fraction of injected GNRs was confirmed to be 10−6 for all vessel numbers. The results of this study can serve as a guide for selecting appropriate treatment conditions when conducting photothermal therapy in the future [Display omitted] [ABSTRACT FROM AUTHOR]

Due to increased exposure to ultraviolet radiation caused by increased outdoor activities, the incidence of skin cancer is increasing. Incision is the most typical method for treating skin cancer, and various treatments that can minimize the risks of incision surgery are being investigated. Among them, photothermal therapy is garnering attention because it does not cause bleeding and affords rapid recovery. In photothermal therapy, tumor death is induced via temperature increase. In this study, a numerical study based on heat transfer theory was conducted to investigate the death of squamous cell carcinoma located in the skin layer based on various shapes of gold nanoparticles (AuNPs) used in photothermal therapy. The quantitative correlation between the conditions of various AuNPs and the laser intensity that yields the optimal photothermal treatment effect was derived using the effective apoptosis ratio. It was confirmed that optimal conditions exist for maximizing apoptosis within a tumor tissue and minimizing the thermal damage to surrounding normal tissues when using AuNPs under various conditions. Furthermore, it is envisioned that research result will be utilized as a standard for photothermal treatment in the future. [ABSTRACT FROM AUTHOR]

Recently, photothermal therapy has attracted attention as an alternative treatment to conventional surgical techniques because it does not lead to bleeding and patients quickly recover after treatment compared to incisional surgery. Photothermal therapy induces tumor cell death through an increase in the temperature using the photothermal effect, which converts light energy into thermal energy. This study was conducted to perform numerical analysis based on heat transfer to induce apoptosis of tumor tissue under various heating conditions in photothermal therapy. The Monte Carlo method was applied to evaluate a multi-layered skin structure containing squamous cell carcinoma. Tissue-equivalent phantom experiments verified the numerical model. Based on the effective apoptosis retention ratio, the numerical analysis results showed the quantitative correlation for the laser intensity, volume fraction of gold nanorods injected into the tumor, and cooling time. This study reveals optimal conditions for maximizing apoptosis within tumor tissue while minimizing thermal damage to surrounding tissues under various heating conditions. This approach may be useful as a standard treatment when performing photothermal therapy. [ABSTRACT FROM AUTHOR]