Search

State-of-the-art low-power-level metal-oxide-semiconductor field-effect transistor (MOSFET)-based transformerless photovoltaic (PV) inverters can achieve high efficiency by using latest super junction MOSFETs. However, these MOSFET-based inverter topologies suffer from one or more of these drawbacks: MOSFET failure risk from body diode reverse recovery, increased conduction losses due to more devices, or low magnetics utilization. By splitting the conventional MOSFET-based phase leg with an optimized inductor, this paper proposes a novel MOSFET-based phase leg configuration to minimize these drawbacks. Based on the proposed phase leg configuration, a high efficiency single-phase MOSFET transformerless inverter is presented for the PV microinverter applications. The pulsewidth modulation (PWM) modulation and circuit operation principle are then described. The common-mode and differential-mode voltage model is then presented and analyzed for circuit design. Experimental results of a 250 W hardware prototype are shown to demonstrate the merits of the proposed transformerless inverter on nonisolated two-stage PV microinverter application. [ABSTRACT FROM AUTHOR]

This paper presents a nonisolated, high boost ratio dc-dc converter with the application for photovoltaic (PV) modules. The proposed converter utilizes a hybrid transformer to incorporate the resonant operation mode into a traditional high boost ratio active-clamp coupled-inductor pulse-width-modulation dc-dc converter, achieving zero-voltage-switching (ZVS) turn-on of active switches and zero-current-switching turn-off of diodes. As a result of the inductive and capacitive energy being transferred simultaneously within the whole switching period, power device utilization (PDU) is improved and magnetic utilization (MU) is optimized. The improved PDU allows reduction of the silicon area required to realize the power devices of the converter. The optimized MU reduces the dc-bias of magnetizing current in the magnetic core, leading to smaller sized magnetics. Since the magnetizing current has low dc-bias, the ripple magnetizing current can be utilized to assist ZVS of main switch, while maintaining low root-mean-square (RMS) conduction loss. The voltage stresses on the active switches and diodes are maintained at a low level and are independent of the wide changing PV voltages as a result of the resonant capacitor in series in the energy transfer loop. The experimental results based on 250 W prototype circuit show 97.7% peak efficiency and system CEC efficiencies greater than 96.7% over 20 to 45 V input voltages. Due to the high efficiency over wide power range, the ability to operate with a wide variable input voltage and compact size, the proposed converter is an attractive design for PV module applications. [ABSTRACT FROM AUTHOR]

This paper presents a high-reliability single-phase transformerless grid-connected inverter that utilizes superjunction MOSFETs to achieve high efficiency for photovoltaic applications. The proposed converter utilizes two split ac-coupled inductors that operate separately for positive and negative half grid cycles. This eliminates the shoot-through issue that is encountered by traditional voltage source inverters, leading to enhanced system reliability. Dead time is not required at both the high-frequency pulsewidth modulation switching commutation and the grid zero-crossing instants, improving the quality of the output ac-current and increasing the converter efficiency. The split structure of the proposed inverter does not lead itself to the reverse-recovery issues for the main power switches and as such superjunction MOSFETs can be utilized without any reliability or efficiency penalties. Since MOSFETs are utilized in the proposed converter high efficiency can be achieved even at light load operations achieving a high California energy commission (CEC) or European union efficiency of the converter system. It also has the ability to operate at higher switching frequencies while maintaining high efficiency. The higher operating frequencies with high efficiency enables reduced cooling requirements and results in system cost savings by shrinking passive components. With two additional ac-side switches conducting the currents during the freewheeling phases, the photovoltaic array is decoupled from the grid. This reduces the high-frequency common-mode voltage leading to minimized ground loop leakage current. The operation principle, common-mode characteristic and design considerations of the proposed transformerless inverter are illustrated. The total losses of the power semiconductor devices of several existing transformerless inverters which utilize MOSFETs as main switches are evaluated and compared. The experimental results with a 5 kW prototype circuit show 99.0% CEC efficiency and 99.3% peak efficiency with a 20 kHz switching frequency. The high reliability and efficiency of the proposed converter makes it very attractive for single-phase transformerless photovoltaic inverter applications. [ABSTRACT FROM AUTHOR]