Search

We report on a continuous-wave (CW) pumped cryogenically cooled rod Yb:YAG regenerative amplifier delivering uncompressed 12-mJ, 90-ps, 1030-nm pulses at a 1-kHz repetition rate. The amplifier demonstrates an efficiency of 31.7%. A symmetric cavity design was utilized to compensate for the substantial thermal lensing effect, yielding a final measured beam quality of 1.1 in both horizontal and vertical directions. After significant gain narrowing, the measured spectra exhibit a bandwidth of 0.3 nm corresponding to an approximately 5 ps transform-limited pulse.

The photoinjector laser system of Shenzhen Superconducting Soft X-Ray Free Electron Laser (S3FEL) is reported in this paper. This laser system operates at up to 1 MHz and produces more than 50 μJ infrared (IR) laser pulses. With a customized fourth harmonic generation (FHG) module, more than 2 μJ ultraviolet (UV) laser pulses were obtained. The power standard deviations of the IR laser and the UV laser are 0.093% and 0.395% respectively. While the pulse energy standard deviations are 1.087% and 1.746% correspondingly. We implemented the pulse stacking scheme to generate flat-top pulses. With four birefringent uniaxial crystals, the Gaussian pulses were converted to flat-top shape, featuring 10 ps pulse width and 0.5 ps rising and falling edges. A cut-Gaussian transverse profile with very sharp rising and falling edges can be produced after the spatial pulse shaper.

Compact, stable, high-power and high repetition rate picosecond laser systems are excellent sources for optical parametric chirped pulse amplification systems and laser satellite ranging systems. Compared with the traditional complex high-power amplifier, this article reports a compact high-power picosecond laser system at a repetition rate of 1 kHz based on Nd:YAG bulk crystal. The thermal lens effect limits the regenerative amplifier to directly output higher energy. For this reason, multi-stage traveling-wave amplifiers are usually used to gradually increase the laser pulse energy. So as to achieve a compact structure, a regenerative amplifier that can output higher power at 1 kHz is designed in the laser system. The regenerative amplifier can output the power of 6.5 W at the pump power of 41.5 W; the beam quality of M2 factor was about 1.3. A more flexible thermal depolarization compensation structure is applied in the side-pumped amplifier, which can effectively compensate for thermal lens effect and thermal depolarization at different pump powers. Finally, the laser pulse can achieve an output power higher than 50 W at 1 kHz after passing through an end-pumped traveling-wave amplifier and a side-pumped traveling wave amplifier.