Search

The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating point of the RRM. The optimized driving signals are then applied to a silicon RRM. EOFCs containing 7 and 9 lines are synthesized with a power imbalance between the lines of 2.9 dB and 5.4 dB, respectively, compared to 9.4 dB for an optimized 5-line comb generated from a single sinusoidal driving signal., Comment: 4 pages, 5 figures, submitted to Optics Letters

Designing and optimizing optical amplifiers to maximize system performance is becoming increasingly important as optical communication systems strive to increase throughput. Offline optimization of optical amplifiers relies on models ranging from white-box models deeply rooted in physics to black-box data-driven and physics-agnostic models. Here, we compare the capabilities of white-, grey- and black-box models on the challenging test case of optimizing a bidirectional distributed Raman amplifier to achieve a target frequency-distance signal power profile. We show that any of the studied methods can achieve similar frequency and distance flatness of between 1 and 3.6 dB (depending on the definition of flatness) over the C-band in an 80-km span. Then, we discuss the models' applicability, advantages, and drawbacks based on the target application scenario, in particular in terms of flexibility, optimization speed, and access to training data.

We experimentally validate a machine learning-enabled Raman amplification framework, capable of jointly shaping the signal power evolution in two domains: frequency and fiber distance. The proposed experiment addresses the amplification in the whole C-band, by optimizing four first-order counter-propagating Raman pumps., Comment: 4 pages, 5 figures

We present a Convolutional Neural Network (CNN) architecture for inverse Raman amplifier design. This model aims at finding the pump powers and wavelengths required for a target signal power evolution, both in distance along the fiber and in frequency. Using the proposed framework, the prediction of the pump configuration required to achieve a target power profile is demonstrated numerically with high accuracy in C-band considering both counter-propagating and bidirectional pumping schemes. For a distributed Raman amplifier based on a 100 km single-mode fiber, a low mean set (0.51, 0.54 and 0.64 dB) and standard deviation set (0.62, 0.43 and 0.38 dB) of the maximum test error are obtained numerically employing 2 and 3 counter, and 4 bidirectional propagating pumps, respectively., Comment: 4 pages, 4 figures

We numerically demonstrate an all-optical nonlinearity pre-compensation module for state-of-the-art long-reach Raman-amplified unrepeatered links. The compensator design is optimized in terms of propagation symmetry to maximize the performance gains under WDM transmission, achieving 4.0dB and 2.6dB of SNR improvement for 250-km and 350-km links.

A machine learning framework predicting pump powers and noise figure profile for a target distributed Raman amplifier gain profile is experimentally demonstrated. We employ a single-layer neural network to learn the mapping from the gain profiles to the pump powers and noise figures. The obtained results show highly-accurate gain profile designs and noise figure predictions, with a maximum error on average of ~0.3dB. This framework provides the comprehensive characterization of the Raman amplifier and thus is a valuable tool for predicting the performance of the next-generation optical communication systems, expected to employ Raman amplification., Comment: 4 pages, 5 figures

Optical communication systems are always evolving to support the need for ever-increasing transmission rates. This demand is supported by the growth in complexity of communication systems which are moving towards ultra-wideband transmission and space-division multiplexing. Both directions will challenge the design, modeling, and optimization of devices, subsystems, and full systems. Amplification is a key functionality to support this growth and in this context, we recently demonstrated a versatile machine learning framework for designing and modeling Raman amplifiers with arbitrary gains. In this paper, we perform a thorough experimental characterization of such machine learning framework. The applicability of the proposed approach, as well as its ability to accurately provide flat and tilted gain-profiles, are tested on several practical fiber types, showing errors below 0.5~dB. Moreover, as channel power optimization is heavily employed to further enhance the transmission rate, the tolerance of the framework to variations in the input signal spectral profile is investigated. Results show that the inverse design can provide highly accurate gain-profile adjustments for different input signal power profiles even not considering this information during the training phase., Comment: 11 pages, 12 figures

Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (365nm) with loss below 0.4dB/km. A key component in realizing multi-band optical communication systems is the optical amplifier. Apart from having an ultra-wide gain profile, the ability of providing arbitrary gain profiles, in a controlled way, will become an essential feature. The latter will allow for signal power spectrum shaping which has a broad range of applications such as the maximization of the achievable information rate X distance product, the elimination of static and lossy gain flattening filters (GFF) enabling a power efficient system design, and the gain equalization of optical frequency combs. In this paper, we experimentally demonstrate a multi-band (S+C+L) programmable gain optical amplifier using only Raman effects and machine learning. The amplifier achieves >1000 programmable gain profiles within the range from 3.5 to 30 dB, in an ultra-fast way and a very low maximum error of 1.6e-2 dB/THz over an ultra-wide bandwidth of 17.6-THz (140.7-nm)., Comment: 10 pages, 8 figures

A machine learning framework for Raman amplifier design is experimentally tested. Performance in terms of maximum error over the gain profile is investigated for various fiber types and lengths, demonstrating highly-accurate designs., Comment: 3 pages, 2 figures, conference

We demonstrate wavelength conversion of QAM signals including 32GBd QPSK and 10GBd 16QAM in a 50cm long high index doped glass spiral waveguide. The quality of the generated idlers over a 10nm bandwidth is sufficient to achieve a BER performance below the HD FEC threshold (less than 3.8 x 10-3), with an OSNR penalty of less than 0.3 dB compared to the original signal. Our results confirm that this is a promising platform for nonlinear optical signal processing, a result of both very low linear propagation loss (less than 0.07 dB/cm) and the large material bandgap that ensures negligible nonlinear loss at telecom wavelengths., Comment: 14 pages, 8 figures, 23 references