Search

Abstract: Several theoretical and experimental studies have been carried out in recent years aimed at enhancing the mechanical resistance and osseo-integration of titanium based dental implants. The often inadequate mechanical properties of commercially pure titanium (CpTi) can lead to the clinical failure of dental materials. A plasma immersion ion implantation (PIII) process has been applied to CpTi samples in an optimized nitrogen/oxygen gas mixture at middle and high temperatures, improving considerably the properties of these. Studies of microhardness, corrosion, AFM, XRD and Raman spectroscopy have been applied in order to evaluate the treated samples whereby highly biocompatible TiO2 (Rutile) and TiNx layers have been identified. A high corrosion tolerance was found for CpTi, indicating a typical passive behavior of titanium, which can be attributed to a highly stable film formed on the samples placed in Hank's solution. The hardness was improved nearly five times with respect to that of the control material. [Copyright &y& Elsevier]

Abstract: A study of the plasma ion implantation (PIII) of commercially pure titanium (CpTi) at a low voltage (<4kV) is presented. The processed samples were treated in divers mixtures of O and N in order to achieve biocompatible oxidized and nitrided layers as well as to enhance their superficial hardness. In this way, the low wearing resistance of CpTi can be avoided while creating a biocompatible rutile phase titanium oxide layer for a better bone integration. A form of synergy associated to the dependence of microhardness on the implanted layer disposition is identified. Thus, an upper rutile layer is immediately followed by another one, in which titanium, a nitride (TiN0.26) and rutile coexist. The latter leads to a superior microhardness performance. Most of all these surface treatments of titanium, when applying an 80%N–20%O mixture, yield higher corrosion resistance parameters with respect to the main metallic materials used in prosthetics, including the Co–Cr–Mo alloys, albeit excluding CpTi. [Copyright &y& Elsevier]

Abstract: Better protective and functional coatings on dental drills are increasingly demanded for their desired mechanical, tribological or chemical properties. We have studied the surface modification of steel dental drills, with an aim to increasing both their cutting life and corrosion resistance in dentistry using low-energy plasma-immersion nitrogen implantation over different temperature ranges. The temperature of the drills was controlled by varying the implantation voltage. Following implantation, tests showed that the microhardness of the nitrided drill surfaces was approximately one order higher than that of untreated drills and the corrosion tolerance was found to increase with growing temperature of the plasma-immersion process. [Copyright &y& Elsevier]

Abstract: We present a study on the surface modification of dental tools by nitrogen PIII with a view to increasing both their cutting life and corrosion resistance. The treatment temperature was selected between 350 and 500°C, every 50°C, being controlled by varying the pulse duration in order to determine the improvement of the material performance after implantation. The tools were additionally characterized by Knoop microhardness measurements, SEM, XDR and electrochemical corrosion tests which, in all, pointed to an abundance of the supersaturated iron phase accompanied by considerable increases in microhardness and yet, with a slightly enhanced corrosion resistance. Furthermore, the formation of the associated expanded austenitic phase appears to enhance the corrosion resistance of the untreated drills. [Copyright &y& Elsevier]

Abstract: Monitoring basic plasma parameters such as temperature (T), density (n), floating potential (Vf) or Debye length (λd) provides vital knowledge during the ion implantation processing of materials immersed in plasmas (PIII or PSII) generated either by DC or (13.56MHz) RF sources. Thus, a fully automated electromechanical system has been designed and constructed on the basis of guard double electric probes in order to prevent both probe erosion and plasma contamination. The electronic components of the system comprise a ±150V triangular and ramp wave form generator capable of supplying ±50μA to ±100mA currents at 1–2000Hz frequencies and a DAQ PCI-6023E data acquisition board with a 12 bit resolution compatible with LabVIEW graphic language. A program has been specifically developed for the latter in order to control the probe position within the discharge vessel and to capture, filter, visualize, process and store the respective information. The system has been experimentally applied to DC and RF plasmas of helium, argon, nitrogen, oxygen, and multiple gas mixtures with great success, inside several PIII reactors. Results are presented free from RF interference from the process itself or other surrounding sources. [Copyright &y& Elsevier]