Search

Caliste project aims at hybridizing 1 cm 2 CdTe or CdZnTe pixel detectors with low-noise full custom front-end electronics, in a single component standing in a 1×1×2 cm 3 volume. Caliste device is 4-side buttable and can be used as elementary detection unit of a large mosaic to form a hard X-ray focal plane of any size and shape. Caliste is especially designed to match astronomical space mission requirements and its design takes into account environmental constraints, radiation environment in particular. This new imaging spectrometer for hard X-rays detection offers high spectral and spatial resolution together with accurate time-tagging capability and low dead time. Caliste concept relies on a 3D hybridization technology that consists in stacking full custom ASICs perpendicular to the detection surface into a single component. This technique simultaneously permits to realize a buttable imager and to enhance performance and uniformity response. Our last prototype is called Caliste 256 and integrates 16×16 pixels array, 580 μm pitch and 256 corresponding independent spectroscopy channels. This paper presents Caliste 256 design and properties. We emphasize spectral performance and demonstrate spectral resolution capabilities better than 1 keV FWHM at 60 keV.

In the frame of the Simbol-X mission of hard X-ray astrophysics, a prototype of micro-camera with 64 pixels called Caliste 64 has been designed and several samples have been tested. The device integrates ultra-low-noise IDeF-X V1.1 ASICs from CEA and a 1 cm 2 Al Schottky CdTe detector from Acrorad because of its high uniformity and spectroscopic performance. The process of hybridization, mastered by the 3D Plus company, respects space applications standards. The camera is a spectro-imager with time-tagging capability. Each photon interacting in the semiconductor is tagged with a time, a position and an energy. Time resolution is better than 100 ns rms for energy deposits greater than 20 keV, taking into account electronic noise and technological dispersal of the front-end electronics. The spectrum summed across the 64 pixels results in an energy resolution of 664 eV fwhm at 13.94 keV and 842 eV fwhm at 59.54 keV, when the detector is cooled down to −10 °C and biased at −500 V.

Caliste project aims at hybridizing 1 cm2 Cd(Zn)Te detectors with low noise front-end electronics, in a single component standing in a 1 times 1times 2 cm3 volume. The micro-camera is a spectroscopic imager for X and gamma rays detection, with time-tagging capability. Hybridization consists in stacking full custom ASICs perpendicular to the detection surface. The first prototype Caliste 64 integrates a detector of 8 times 8 pixels of 1 mm pitch. Fabrication and characterizations of nine cameras units validate the design and the hybridization concept. Spectroscopic tests result in a mean energy resolution of ~0.7 keV FWHM at 14 keV and ~0.85 keV FWHM at 60 keV using 1 mm-thick Al Schottky CdTe detectors biased at -400 V and cooled down to -15degC. The new prototype called Caliste 256 integrates 16 times 16 pixels of 580 mum pitch in the same volume as Caliste 64. Electrical tests with the first sample fabricated without detector result in a mean equivalent noise charge of 64 e- rms (9.6 mus, no leakage current). Caliste devices are 4-side buttable and can be used as elementary detection units of a large hard X-ray focal plane, as for the 64 cm2 high energy detector of the Simbol-X astronomical space mission.

In the frame of the hard X-ray simbol-X observatory, a joint CNES-ASI space mission to be flown in 2013, a prototype of miniature camera equipped with 64 pixels has been designed. The device, called CALISTE 64, is a spectro- imager with high resolution event time-tagging capability. CALISTE 64 integrates a CdTe semiconductor detector with segmented electrode and its front-end electronics made of 64 independent analogue readout channels. This 10times10times18 mm3 camera, able to detect photons in the range from 2 keV up to 250 keV, is an elementary detection unit juxtaposable on its four sides. Consequently, large detector array can be made assembling a mosaic of CALISTE 64 units. Electronics readout module is achieved by stacking four IDeF-X V1.1 ASICs in a 3D-module, perpendicular to the detection plane. We achieved good noise performances, with an equivalent noise charge better than 60 electrons rms in average. We choose CdTe detectors equipped with aluminum Schottky barrier contacts because of their very low dark current and excellent spectroscopic performances. The first integrated CALISTE 64 camera was realized and tested. The device operates properly and all the 64 pixels show good spectra. When the crystal is cooled down to -10degC and biased at -400 V, the resulting sum spectrum shows a spectral resolution of 697 eV FWHM at 13.9 keV and 808 eV FWHM at 59.54 keV. This paper presents the CALISTE 64 design and preliminary performance test results.

The Microchannel X-Ray Telescope will be implemented on board the SVOM space mission to observe the afterglow of gamma-ray bursts and localize them with 2 arcmin precision. The optical system is based on microchannel plates assembling in Wolter-I configuration to focus the X-rays in the focal plane, like done for the MIXS telescope of the BepiColombo ESA mission. The sensor part is a 256 × 256 pixel pnCCD from the Max-Planck Institute for Extraterrestrial Physics for high resolution spectroscopy and high quantum efficiency over 0.2 – 10 keV energy range, based on the same technology and design as the eROSITA telescopes for the Russian-German SRG mission. CEA-Irfu (Saclay) is in charge of the design and the realization of the camera, including the focal plane, the calibration wheel, the front-end electronics, the structure housing for background shielding and the active cooling system. A prototype of the full detection chain and the acquisition system was set up. The paper presents the preliminary design of the electrical, mechanical and thermal architectures of the camera. It focuses on the fabrication and testing of the critical elements of the design and concludes on the on-going developments.

SINCE few years, our group is developing a family of ASICs for space applications, named IDeF-X for Imaging Detector Front-end [l]-[4]. IDeF-X HD is the new member of the IDeF-X family. It has been optimized for the readout of 16 × 16 pixels CdTe or CdZnTe pixelated detectors to build a new low power Caliste 256 module [5]. This micro gamma-camera will be the elementary unit of the MAC SI (Modular Assembly of Caliste Spectro Imager) camera: A 2048-pixels 8 cm2 gamma camera designed with 8 identical Caliste modules.

In the frame of the hard X-ray Simbol-X observatory, a jo int CNES-ASI space mission to be flown in 2014, a prototype of miniature Cd(Zn)Te camera equipped with 64 pixels has been designed. The device, called Caliste 64, is a spectro-imager with high resolution event time-tagging capability. Calis te 64 integrates a Cd(Zn)Te semiconductor detector with segmented electrode and its front-end electronics made of 64 independent analog readout channels. This 1 u 1 u 2 cm 3 camera, able to detect photons in the range from 2 keV up to 250 keV, is an elementary detection unit juxtaposable on its four sides. Consequently, large detector array can be made assembling a mosaic of Caliste 64 units. Electronics readout module is achieved by stacking four IDeF-X V1.1 ASICs, perpendicular to the detection plane. We achieved good noise performances, with a mean Equivalent Noise Charge of ~65 electrons rms over the 64 channels. Time resolution is better than 70 ns rms for energy deposits greater than 50 keV, ta king into account electronic noise and technological dispersal, which enables to reject background by anticoincidence with very low probability of error. For the first prototypes, we chose CdTe detectors equipped with Al-Ti-Au Schottky barrier contacts because of their very low dark current and excellent spectroscopic performances. So fa r, three Caliste 64 cameras have been r ealized and tested. When the crystal is cooled down to -10°C, the sum spectrum built with the 64 pixels of a Caliste 64 sample results in a spectral resolution of 664 eV FWHM at 13.94 keV and 841 eV FWHM at 59.54 keV. Keywords: CdTe, Simbol-X, spectro-imager, X rays