Search

Sugar beet productivity is highly constrained by the root-knot nematode (RKN) Meloidogyne incognita. Eight sugar beet genotypes were screened under greenhouse conditions for their susceptibility to M. incognita according to an adapted quantitative scheme for assignment Canto-Saenz’s host suitability (resistance) designations (AQSCS). Besides, the degree of susceptibility or tolerance of the examined genotypes was recorded by the modified host-parasite index (MHPI) scale based on yield performance. In addition, single nucleotide polymorphism (SNP) was also determined. Sugar beet genotypes have been classified into four categories for their susceptibility or tolerance according to the AQSCS scale. The first category, the moderately resistant (MR) group implies only one variety named SVH 2015, which did not support nematode reproduction (RF≤1), and had less root damage (GI≈2). Second, the tolerant group (T) involving Lilly and Halawa KWS supported fairly high nematode reproduction (RF>1) with relatively plant damage (GI≤2). Whereas the susceptible (S) category involved four varieties, FARIDA, Lammia KWS, Polat, and Capella, which supported nematode reproduction factor (RF>1) with high plant damage (GI>2). The fourth category refers to the highly susceptible (HYS) varieties such as Natura KWS that showed (RF≤1) and very high plant damage (GI>2). However, the MHPI scale showed that Lammia KWS variety was shifted from the (S) category to the (T) category. Results revealed significant differences among genotypes regarding disease severity, yield production, and quality traits. The SVH 2015 variety exhibited the lowest disease index values concerning population density with 800/250 cm3 soils, RF=2, root damage/gall index (GI=1.8), gall size (GS=2.3), gall area (GA=3.7), damage index (DI=3.4), susceptibility rate (SR=2.4), and MHP index (MHPI=2.5). However, Lammia KWS showed the highest disease index values regarding population density with 8890/250 cm3 soils, RF= 22.2, GI= 4.8, and SR= 14.1. Meanwhile, Natura KWS the highest GS, GA and MHPI with 7.1, 8 and 20.9, respectively. The lowest DI was achieved by Capella (DI= 6) followed by Lammia KWS (DI= 5.9). For yield production, and quality traits, SVH 2015 exhibited the lowest reductions of sugar yields/beet's root with 11.1%. While Natura KWS had the highest reduction with 79.3%, as well as it showed the highest reduction in quality traits; including sucrose, T.S.S, and purity with 65, 27.3, and 51.9%, respectively. The amino acid alignment and prediction of the DNA sequences revealed the presence of five SNPs among all sugar beet verities.

Salinity is one of the major plant abiotic stresses increasing over time worldwide. The most important biological role of nitric oxide (NO) in plants is related to their development and growth under abiotic conditions. The present experiment was conducted to study the effect of salt stress (0 and 100 mM) and NO (0 and 80 μM) on two different ecotypes of Brassica rapa (L.): PTWG-HL and PTWG-PK. The different growth attributes, biochemical and physiological parameters, and the mineral contents were examined. The results indicated increased hydrogen peroxide (H2O2), relative membrane permeability, malondialdehyde (MDA), and Na+ content and decreased plant biomass in both ecotypes (PTWG-PK and PTWG-HL) under salt stress. In contrast, NO treatment resulted in increased plant biomass, chlorophyll content, and total soluble proteins and decreased H2O2, relative membrane permeability, MDA, total phenolic content, catalase (CAT), peroxidase (POD), ascorbate peroxidase (APX), and Na+. The combined effect of salt stress and NO application increased the chlorophyll a content, total phenolic content, and total soluble proteins, but decreased H2O2, relative membrane permeability, MDA, and Na+. The response of carotenoids, anthocyanins, and K+, Ca2+, and Cl− ions varied in both ecotypes under all treatment conditions. The PTWG-PK ecotype showed maximum overall growth response with the application of NO. Henceforth, it is proposed that the molecular mechanisms associated with NO-induced stress tolerance in plants may be exploited to attain sustainability in agriculture under changing climate scenarios.

Improper optimization of the rates and ratios of nitrogen application reduces grain yields and increases the nitrogen loss, thereby affecting environmental quality. In addition, scarcer evidence exists on the integrative approach of nitrogen, which could have effects on the biochemical and physiological characteristics of wheat. Treatments were arranged as nitrogen (N) rates of 00, 75, 150, 225, and 300 kg ha−1 in the main plots, and different nitrogen ratios were organized in subplots at 5:5:0:0 and 6:4:0:0, which were applied at the sowing, jointing, flowering, and grain filling stages. The results revealed that 225 kg N ha−1 significantly enhanced the stomatal conductance (Gs), photosynthetic rate (Pn), intercellular CO2 (Ci), transpiration rate (Tr), and total chlorophyll by 28.5%, 42.3%, 10.0%, 15.2%, and 50%, receptively, at the jointing stage in comparison to the control (0 kg N ha−1). Nitrogen application of 225 kg ha−1 increased the soil–plant analysis development (SPAD) value and the chlorophyll a, chlorophyll b, and carotenoid contents of winter wheat under the 6:4:0:0 ratio. The trend of the photosynthetic characteristics was observed to be greater at the 6:4:0:0 fertilization ratio compared to that at 5:5:0:0. The photosynthetic rate was significantly associated with the biochemical and physiological characteristics of winter wheat. In conclusion, the nitrogen dose of 225 kg ha−1 and the ratio of 6:4:0:0 (quantity applied at the sowing, jointing, flowering, and grain filling stages) effectively promoted the photosynthetic and other physiological characteristics of winter wheat.

Plant tissue culture technique employed for the identification and isolation of bioactive phytocompounds has numerous industrial applications. It provides potential benefits for different industries which include food, pharmaceutical and cosmetics. Various agronomic crops i.e., cereals, fruits, vegetables, ornamental plants and forest trees are currently being used for in vitro propagation. Plant tissue culture coupled with biotechnological approaches leads towards sustainable agricultural development providing solutions to major food security issues. Plants are the rich source of phytochemicals with medicinal properties rendering them useful for the industrial production of pharmaceuticals and nutraceuticals. Furthermore, there are numerous plant compounds with application in the cosmetics industry. In addition to having moisturizing, anti‐ageing, anti‐wrinkle effects; plant-derived compounds also possess pharmacological properties such as antiviral, antimicrobial, antifungal, anticancer, antioxidant, anti-inflammatory, and anti-allergy characteristics. The in vitro propagation of industrially significant flora is gaining attention because of its several advantages over conventional plant propagation methods. One of the major advantages of this technique is the quick availability of food throughout the year, irrespective of the growing season, thus opening new opportunities to the producers and farmers. The sterile or endangered flora can also be conserved by plant micro propagation methods. Hence, plant tissue culture is an extremely efficient and cost-effective technique for biosynthetic studies and bio-production, biotransformation, or bioconversion of plant-derived compounds. However, there are certain limitations of in-vitro plant regeneration system including difficulties with continuous operation, product removal, and aseptic conditions. For sustainable industrial applications of in-vitro regenerated plants on a large scale, these constraints need to be addressed in future studies.

Cotton is considered as the main crop in the agricultural sector of Pakistan. Water deficiency in this region in recent years has reduced the chances of high yields of cotton. Selection and creation of high-yielding varieties of cotton, even in water deficit conditions, is one of urgent tasks of today. For this purpose, 40 diverse genotypes of upland cotton were screened in normal and water deficit conditions in triplicate arrangement under split plot in a randomized complete block design. All the genotypes showed significant difference under both water regimes. Ten upland cotton accessions were screened out as water deficit tolerant (VH-144, IUB-212, MNH-886, VH-295, IR-3701, AA-802, NIAB-111, NS-121, FH-113, and FH-142) and five as water deficit sensitive (IR-3, CIM-443, FH-1000, MNH-147, and S-12) based on seed cotton yield and stress susceptibility index. These tolerant and sensitive genotypes were crossed in line × tester mating design. For further evaluation of genetic material, the seed of 50 F1 crosses and their 15 parents were field planted under normal and water deficit conditions during next cotton growing season. Traits related to yield under the study showed significant variations among the accessions and their half sibs. The results of the principal component analysis (PCA) exhibited that total variation exhibited by factors 1 and factor 2 were 55.55 and 41.95%, respectively. PCA transformed the variables into three factors, and only two factors (F1 and F2) had eigenvalue > 1. The degree of dominance revealed that all parameters were highly influenced by non-additive gene action under both water regimes. Furthermore, the line VH-295 and tester CIM-443 had better yield performance under water deficit stress. The cross-combinations, viz., VH-144 × S-12, NIAB-111 × IR-3, and VH-295 × MNH-147, were the best for yield contributing traits. These combinations may be helpful for germplasm enhancement on large scale under water scarcity. All the studied traits have non-additive types of gene action suggesting the usage of these genotypes in cotton hybrid development program against water deficit tolerance.

Maize-soybean intercropping is practiced worldwide because of some of the anticipated advantages such as high crop yield and better utilization of resources (i.e., water, light, nutrients and land). However, the shade of the maize crop has a detrimental effect on the growth and yield of soybean under the maize-soybean intercropping system. Hence, this experiment was conducted to improve the shade tolerance of such soybean crops with optimal nitrogen (N) fertilization combined with foliar application of iron (Fe) and molybdenum (Mo). The treatments comprised five (5) maize-soybean intercropping practices: without fertilizer application (F0), with N fertilizer application (F1), with N fertilizer combined with foliar application of Fe (F2), with N fertilizer coupled with foliar application of Mo (F3) and with N fertilizer combined with foliar application of Fe and Mo (F4). The findings of this study showed that maize-soybean intercropping under F4 treatment had significantly (p< 0.05) increased growth indices such as leaf area (cm2), plant height (cm), stem diameter (mm), stem strength (g pot-1), and internode length (cm) and yield indices (i.e., No of pods plant-1, grain yield (g plant-1), 100-grain weight (g), and biomass dry matter (g plant-1)) of the soybean crop. Moreover, intercropping under F4 treatment enhanced the chlorophyll SPAD values by 26% and photosynthetic activities such as Pn by 30%, gs by 28%, and Tr by 28% of the soybean crops, but reduced its CO2 by 11%. Furthermore, maize-soybean intercropping under F4 treatment showed improved efficiency of leaf chlorophyll florescence parameters of soybean crops such as Fv/Fm (26%), qp (17%), ϕPSII (20%), and ETR (17%), but reduced NPQ (12%). In addition, the rubisco activity and soluble protein content of the soybean crop increased by 18% in maize-soybean intercropping under F4 treatment. Thus, this suggested that intercropping under optimal N fertilization combined with foliar application of Fe and Mo can improve the shade tolerance of soybean crops by regulating their chlorophyll content, photosynthetic activities, and the associated enzymes, thereby enhancing their yield and yield traits.

Global climate change stress has greatly influenced agricultural crop production which leads to the global problems such as food security. To cope with global climate change, nature based solutions (NBS) are desirable because these lead to improve our environment. Environmental stresses such as drought and salinity are big soil problems and can be eradicated by increasing soil organic matter which is directly related to soil organic carbon (SOC). SOC is one of the key components of the worldwide carbon (C) cycle. Different types of land use patterns have shown significant impacts on SOC stocks. However, their effects on the various SOC fractions are not well-understood at the global level which make it difficult to predict how SOC changes over time. We aim to investigate changes in various SOC fractions, including mineral associated organic carbon (MAOC), mineral associated organic matter (MAOM), soil organic carbon (SOC), easily oxidized organic carbon (EOC), microbial biomass carbon (MBC) and particulate organic carbon (POC) under various types of land use patterns (NBS), including cropping pattern, residue management, conservation tillages such as no tillage (NT) and reduced tillage (RT) using data from 97 studies on a global scale. The results showed that NT overall increased MAOC, MAOM, SOC, MBC, EOC and POC by 16.2%, 26.8%, 24.1%, 16.2%, 27.9% and 33.2% (P < 0.05) compared to CT. No tillage with residue retention (NTR) increased MAOC, MAOM, SOC, MBC, EOC and POC by 38.0%, 29.9%, 47.5%, 33.1%, 35.7% and 49.0%, respectively, compared to CT (P < 0.05). RT overall increased MAOC, MAOM, SOC, MBC, EOC and POC by 36.8%, 14.1%, 25.8%, 25.9, 18.7% and 16.6% (P < 0.05) compared to CT. Reduced tillage with residue retention (RTR) increased MAOM, SOC and POC by 14.2%, 36.2% and 30.7%, respectively, compared to CT (P < 0.05). Multiple cropping increased MAOC, MBC and EOC by 14.1%, 39.8% and 21.5%, respectively, compared to mono cropping (P < 0.05). The response ratios of SOC fractions (MAOC, MAOM, SOC, MBC, EOC and POC) under NT and RT were mostly influenced by NBS such as residue management, cropping pattern along with soil depth, mean annual precipitation, mean annual temperature and soil texture. Our findings imply that when assessing the effects of conservation tillage methods on SOC sequestration, SOC fractions especially those taking part in driving soil biological activities, should be taken into account rather than total SOC. We conclude that conservation tillages under multiple cropping systems and with retention of crop residues enhance soil carbon sequestration as compared to CT in varying edaphic and climatic conditions of the world.

The world is facing rapid climate change and a fast-growing global population. It is believed that the world population will be 9.7 billion in 2050. However, recent agriculture production is not enough to feed the current population of 7.9 billion people, which is causing a huge hunger problem. Therefore, feeding the 9.7 billion population in 2050 will be a huge target. Climate change is becoming a huge threat to global agricultural production, and it is expected to become the worst threat to it in the upcoming years. Keeping this in view, it is very important to breed climate-resilient plants. Legumes are considered an important pillar of the agriculture production system and a great source of high-quality protein, minerals, and vitamins. During the last two decades, advancements in OMICs technology revolutionized plant breeding and emerged as a crop-saving tool in wake of the climate change. Various OMICs approaches like Next-Generation sequencing (NGS), Transcriptomics, Proteomics, and Metabolomics have been used in legumes under abiotic stresses. The scientific community successfully utilized these platforms and investigated the Quantitative Trait Loci (QTL), linked markers through genome-wide association studies, and developed KASP markers that can be helpful for the marker-assisted breeding of legumes. Gene-editing techniques have been successfully proven for soybean, cowpea, chickpea, and model legumes such as Medicago truncatula and Lotus japonicus. A number of efforts have been made to perform gene editing in legumes. Moreover, the scientific community did a great job of identifying various genes involved in the metabolic pathways and utilizing the resulted information in the development of climate-resilient legume cultivars at a rapid pace. Keeping in view, this review highlights the contribution of OMICs approaches to abiotic stresses in legumes. We envisage that the presented information will be helpful for the scientific community to develop climate-resilient legume cultivars.

Photosynthetic rate (Pn) and photosynthetic nitrogen use efficiency (PNUE) are the two important factors affecting the photosynthesis and nutrient utilization of plant leaves. However, the effect of N fertilization combined with foliar application of Fe on the Pn and PNUE of the maize crops under different planting patterns (i.e., monocropping and intercropping) is elusive. Therefore, this experiment was conducted to determine the effect of N fertilization combined with foliar application of Fe on the photosynthetic characteristics, PNUE, and the associated enzymes of the maize crops under different planting patterns. The results of this study showed that under intercropping, maize treated with N fertilizer combined with foliar application of Fe had not only significantly (p < 0.05) improved physio-agronomic indices but also higher chlorophyll content, better photosynthetic characteristics, and related leaf traits. In addition, the same crops under such treatments had increased photosynthetic enzyme activity (i.e., rubisco activity) and nitrogen metabolism enzymes activities, such as nitrate reductase (NR activity), nitrite reductase (NiR activity), and glutamate synthase (GOGAT activity). Consequently, intercropping enhanced the PNUE and soluble sugar content of the maize crops, thus increasing its yield compared with monocropping. Thus, these findings suggest that intercropping under optimal N fertilizer application combined with Fe foliation can improve the chlorophyll content and photosynthetic characteristics of maize crops by regulating the associated enzymatic activities. Consequently, this results in enhanced PNUE, which eventually leads to better growth and higher yield in the intercropping system. Thus, practicing intercropping under optimal nutrient management (i.e., N and Fe) could be crucial for better growth and yield, and efficient nitrogen use efficiency of maize crops.

Silver nanoparticles have gained considerable interest in recent decades due to their antimicrobial activity and are used in water disinfection, wound healing, food packaging, and plant protection. This study tested the potential of silver nanoparticles synthesized using the neem (Azadirachta indica) leaf extract against Alternaria solani causes early blight disease in tomato plants. The pathogen was isolated from infected tomato plants and identified using morphological and molecular features. The results showed significant variation among isolates. Isolates, Shk-1 and Ksr-1 were highly pathogenic, causing up to 80% disease incidence. The potential of silver nanoparticles against each isolate was determined using different concentrations of silver nanoparticles. During in vitro and in vivo experiments, the growth inhibition rate of the pathogen was 70–100% at 50 ppm. Lower concentrations of silver nanoparticles (5 and 10 ppm) increased phenolics, PO, PPO, and PAL production by more than 50% as compared to the untreated control. These defensive mechanisms clearly demonstrate the fungicidal potential of AgNPs and recommend their utilization in different crop protection programs.