Search

In this study, a novel nitrogen-rich hyperbranched polymer was designed and synthesized via one-step precipitation copolymerization strategy. As possessing the lone-pair-electron-containing nitrogen atoms and positive-charged amine groups, as well as π electron-conjugated system, the prepared polymer displayed a strong tendency to adsorb protons acid, and negative-charged and conjugated compounds according to acid-base interaction, electrostatic interaction, and π-π stacking interaction. Based on these properties, a novel approach for assembling the proposed polymer coupled with high-performance liquid chromatography was successfully employed for selective enrichment and determination of auxins in plants. The extraction and desorption conditions were evaluated and the limits of detection and the limits of quantification of the proposed method were in the range of 0.15-0.29 μg L -1 and 0.49-0.98 μg L -1 for the four auxins based on the signal-to-noise ratio of 3:1 and 10:1, respectively. The recoveries of the target auxins from spiked plant samples were in the range from 85.0 to 116.3% with relative standard deviations lower than 9.6%. This study presented an inspiring thought for the construction of the versatile polymer adsorbent with highly efficient capturing of analytes from complex samples. Graphical abstract.

Recently, the plant transport field has shifted their research focus toward a more integrative investigation of transport networks thought to provide the basis for long-range transport routes. Substantial progress was provided by of a series of elegant techniques that allow for a visualization or prediction of substrate movements in plant tissues in contrast to established quantitative methods offering low spatial resolution. These methods are critically evaluated in respect to their spatio-temporal resolution, invasiveness, dynamics and overall quality. Current limitations of transport route predictions-based on transporter locations and transport modeling are addressed. Finally, the potential of new tools that have not yet been fully implemented into plant research is indicated., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Background: Quantitative measurement of actual auxin levels in plant tissue is complimentary to molecular methods measuring the expression of auxin related genes. Current analytical methods to quantify auxin have pushed the limit of detection to where auxin can be routinely quantified at the pictogram (pg) level, reducing the amount of tissue needed to perform these kinds of studies to amounts never imagined a few years ago. In parallel, the development of technologies like laser microdissection microscopy (LMD) has allowed specific cells to be harvested from discrete tissues without including adjacent cells. This method has gained popularity in recent years, especially for enabling a higher degree of spatial resolution in transcriptome profiling. As with other quantitative measurements, including hormone quantifications, sampling using traditional LMD is still challenging because sample preparation clearly compromises the preservation of analytes. Thus, we have developed and validated a sample preparation protocol combining cryosectioning, freeze-drying, and capturing with a laser microdissection microscope to provide high-quality and well-preserved plant materials suitable for ultrasensitive, spatially-resolved auxin quantification., Results: We developed a new method to provide discrete plant tissues for indole-3-acetic acid (IAA) quantification while preserving the plant tissue in the best possible condition to prevent auxin degradation. The method combines the use of cryosectioning, freeze-drying and LMD. The protocol may also be used for other applications that require small molecule analysis with high tissue-specificity where degradation of biological compounds may be an issue. It was possible to collect the equivalent to 15 mg of very specific tissue in approximately 4 h using LMD., Conclusions: We have shown, by proof of concept, that freeze dried cryosections of plant tissue were suitable for LMD harvest and quantification of the phytohormone auxin using GC-MS/MS. We expect that the ability to resolve auxin levels with both spatial- and temporal resolution with high accuracy will enable experiments on complex processes, which will increase our knowledge of the many roles of auxins (and, in time, other phytohormones) in plant development.

We report a new method for histochemical localization of cytokinins (CKs) in plant tissues based on bromophenol blue/silver nitrate staining. The method was validated by immunohistochemistry using anti-trans-zeatin riboside antibody. Indole-3-acetic acid (auxin, IAA) was localized by anti-IAA antibody in plant tissues as a proof for IAA histolocalization. We used root sections, because they are major sites of CKs synthesis, and insect galls of Piptadenia gonoacantha that accumulate IAA. Immunostaining confirmed the presence of zeatin and sites of accumulation of IAA indicated by histochemistry. The colors developed by histochemical reactions in free-hand sections of plant tissues were similar to those obtained by thin layer chromatography (TLC), which reinforced the reactive sites of zeatin. The histochemical method for detecting CKs is useful for galls and roots, whereas IAA detection is more efficient for gall tissues. Therefore, galls constitute a useful model for validating histochemical techniques due to their rapid cell cycles and relatively high accumulation of plant hormones.

Plants seem to be rather defenceless, they are unable to do motion, have no nervous system or immune system unlike animals. Besides this, plants do have hormones, though these substances are produced not in glands. In view of their complexity they lagged behind animals, however, plant organisms show large scale integration in their structure and function. In higher plants, such as in animals, the intercellular communication is fulfilled through chemical messengers. These specific compounds in plants are called phytohormones, or in a wide sense, bioregulators. Even a small quantity of these endogenous organic compounds are able to regulate the operation, growth and development of higher plants, and keep the connection between cells, tissues and synergy between organs. Since they do not have nervous and immume systems, phytohormones play essential role in plants' life.

Recent biochemical results suggest that auxin (IAA) efflux is mediated by a vesicular cycling mechanism, but no direct detection of vesicular IAA release from single plant cells in real-time has been possible up to now. A TiC@C/Pt-QANFA micro-electrochemical sensor has been developed with high sensitivity in detection of IAA, and it allows real-time monitoring and quantification of the quantal release of auxin from single plant protoplast by exocytosis., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A label-free electrochemical immunosensor for ultra-sensitive detection of indole-3-acetic acid (IAA), a very important phytohormone, has been developed in this work. The detection strategy was mainly based on 4-aminophenylboronic acid, magnetic nanoparticles functionalized with horseradish peroxidase-conjugated goat anti-rat immunoglobulin G (HRP-IgG-Fe(3)O(4)) and rat monoclonal antibody against IAA-modified gold nanoparticles (anti-IAA-AuNPs). HRP-IgG-AuNPs was covalently assembled on the electrode surface through the specific chemical reaction between boronic acid and the vicinal diol in HRP-IgG. Then, anti-IAA-AuNPs was further assembled on the electrode via the interaction between IgG and antibody. Through the dual amplification of HRP-IgG-Fe(3)O(4) and anti-IAA-AuNPs, the trapping capacity of the immunosensor for IAA was significantly enhanced based on the promotion of the immunoreaction between antibody and antigen, which resulted in a large decrease of the electrochemical response of the redox probe, Fe(CN)(6)(3-), and an increase in sensitivity. The developed electrochemical immunosensor exhibited a wide linear range from 0.02 to 500 ng mL(-1) with a low detection limit of 0.018 ng mL(-1) (S/N = 3). Moreover, the proposed immunosensor showed acceptable selectivity, reproducibility, accuracy and stability. The IAA extracted from various seeds was successfully detected using the developed immunosensor. This assay method might provide an alternative strategy for the detection of various phytohormones.

Time-resolved quantitative analysis of auxin-mediated processes in plant cells is as of yet limited. By applying a synergistic mammalian and plant synthetic biology approach, we have developed a novel ratiometric luminescent biosensor with wide applicability in the study of auxin metabolism, transport, and signalling. The sensitivity and kinetic properties of our genetically encoded biosensor open new perspectives for the analysis of highly complex auxin dynamics in plant growth and development.

Plant hormones cytokinins, auxin (indole-3-acetic acid), and abscisic acid are central to regulation of plant growth and defence to abiotic stresses such as salinity. Quantification of the hormone levels and determination of their ratios can reveal different plant strategies to cope with the stress, e.g., suppression of growth or mobilization of plant metabolism. This chapter describes a procedure enabling such quantification. Due to the high variability of these hormones in plant tissues, it is advantageous to determine their content in the same sample. Reverse phase and ion exchange chromatography allows separation of the individual hormone fractions. Hormones as well as their metabolites can be identified and quantified by LC/MS.

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Auxin measurements in plants are critical to understanding both auxin signaling and metabolic homeostasis. The most abundant natural auxin is indole-3-acetic acid (IAA). This protocol is for the precise, high-throughput determination of free IAA in plant tissue by isotope dilution analysis using gas chromatography-mass spectrometry (GC-MS). The steps described are as follows: harvesting of plant material; amino and polymethylmethacrylate solid-phase purification followed by derivatization with diazomethane (either manual or robotic); GC-MS analysis; and data analysis. [¹³C₆]IAA is the standard used. The amount of tissue required is relatively small (25 mg of fresh weight) and one can process more than 500 samples per week using an automated system. To extract eight samples, this procedure takes ∼3 h, whether performed manually or robotically. For processing more than eight samples, robotic extraction becomes substantially more time efficient, saving at least 0.5 h per additional batch of eight samples.

Auxin plays an important role in cell differentiation, apical dominance, and tropism in plants. A new method based on dispersive liquid-liquid microextraction (DLLME) combined with high-performance liquid chromatography-fluorescence detection (HPLC-FLD) has been established to detect auxin. A mixture of CHCl(3) (extraction solvent) and acetone (disperser solvent) was injected quickly into a sample solution with desired salt concentration and pH value, and then a cloudy solution consisting of many dispersed fine droplets of CHCl(3) was formed. After centrifugation, the sedimented phase was withdrawn and directly analyzed by HPLC-FLD. Under optimal conditions, four auxins were baseline separated within 3.5 min, with the minimal limit of detection of 0.02 ng mL(-1) and coefficient correlations in the range of 0.9980-0.9995. This simple method was successfully applied to real sample analysis. Experimental results showed that DLLME was a high-performance and powerful preconcentration method to extract and enrich related plant auxin.

To investigate novel pathways involved in auxin biosynthesis, transport, metabolism, and response, we have developed a high-throughput screen for indole-3-acetic acid (IAA) levels. Historically, the quantitative analysis of IAA has been a cumbersome and time-consuming process that does not lend itself to the screening of large numbers of samples. The method described here can be performed with or without an automated liquid handler and involves purification solely by solid-phase extraction in a 96-well format, allowing the analysis of up to 96 samples per day. In preparation for quantitative analysis by selected ion monitoring-gas chromatography-mass spectrometry, the carboxylic acid moiety of IAA is derivatized by methylation. The derivatization of the IAA described here was also done in a 96-well format in which up to 96 samples can be methylated at once, minimizing the handling of the toxic reagent, diazomethane. To this end, we have designed a custom diazomethane generator that can safely withstand high flow and accommodate larger volumes. The method for IAA analysis is robust and accurate over a range of plant tissue weights and can be used to screen for and quantify other indolic auxins and compounds including indole-3-butyric acid, 4-chloro-indole-3-acetic acid, and indole-3-propionic acid.

Currently, the information available on the physiological functions of melatonin in higher plants is rather limited and the role of plant melatonin in human health remains undetermined. Research in this area has been slow due to lack of efficient analytical methods for rapid identification and quantification of the melatonin and related compounds in complex plant matrices. In this communication, we report the development of a rapid, accurate method for extraction, detection and quantification of plant melatonin, serotonin and indole-3-acetic acid (IAA) by Liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and atmospheric pressure photoionization (APPI), respectively. The limit of detection (LOD) of melatonin in the plant extraction was 5 pg/ml and the limit of quantification (LOQ) was 0.02 ng/ml, as well as LOD for serotonin was 100 pg/ml and the LOQ was 5 ng/ml, LOD for IAA was 50 pg/ml and the LOQ was 0.7 ng/ml. There was a linear relationship between melatonin, serotonin, and IAA concentration and peak area over a quantifiable range of 0.02 ng/ml to 0.1 mg/ml, 5 ng/ml to 0.1 mg/ml, and 0.7 ng/ml to 0.1 mg/ml, respectively, in the plant extract.

Phytohormones regulate the protective responses of plants against both biotic and abiotic stresses by means of synergistic or antagonistic actions referred to as signaling crosstalk. A bottleneck in crosstalk research is the quantification of numerous interacting phytohormones and regulators. The chemical analysis of salicylic acid, jasmonic acid, indole-3-acetic acid, and abscisic acid is typically achieved by using separate and complex methodologies. Moreover, pathogen-produced phytohormone mimics, such as the phytotoxin coronatine (COR), have not been directly quantified in plant tissues. We address these problems by using a simple preparation and a GC-MS-based metabolic profiling approach. Plant tissue is extracted in aqueous 1-propanol and mixed with dichloromethane. Carboxylic acids present in the organic layer are methylated by using trimethylsilyldiazomethane; analytes are volatilized under heat, collected on a polymeric absorbent, and eluted with solvent into a sample vial. Analytes are separated by using gas chromatography and quantified by using chemical-ionization mass spectrometry that produces predominantly [M+H]+ parent ions. We use this technique to examine levels of COR, phytohormones, and volatile organic compounds in model systems, including Arabidopsis thaliana during infection with Pseudomonas syringae pv. tomato DC3000, corn (Zea mays) under herbivory by corn earworm (Helicoverpa zea), tobacco (Nicotiana tabacum) after mechanical damage, and tomato (Lycopersicon esculentum) during drought stress. Numerous complex changes induced by pathogen infection, including the accumulation of COR, salicylic acid, jasmonic acid, indole-3-acetic acid, and abscisic acid illustrate the potential and simplicity of this approach in quantifying signaling crosstalk interactions that occur at the level of synthesis and accumulation.