Search

The dielectric recovery process is a crucial stage of current interruption in a vacuum circuit breaker (VCB). The postarc current is an important macroscopic electric characteristic of the dielectric recovery process, which has caused many concerns in the past few decades. In this paper, the postarc currents of VCBs with different types of contacts, such as butt contacts, axial magnetic field contacts, and transverse magnetic field contacts with different materials are measured with a high-resolution current-zero diagnostic system. Besides, the appearance of vacuum arcs is recorded using a high-speed camera in the experiments. The relationship between the arc memory effect and the postarc current is analyzed. What is more, the influence of the instability of the vacuum arc shape on the dispersion of postarc current is also studied. [ABSTRACT FROM AUTHOR]

Cathode spots (CSs) dynamics in the initial expansion stage of high-current triggered vacuum arc and the influence of axial magnetic field (AMF) was investigated experimentally. Experiments were conducted with butt contacts in a demountable vacuum chamber. Images of CSs were photographed with a high-speed digital camera with exposure time of 2 \(\mu \) s. The uniform and constant AMF in the intercontacts region was supplied by external magnetic field coil. In high-current triggered vacuum arc, CSs expanded across the cathode surface in basically a ring-shaped pattern. Experimental results showed that the expansion ring consisted of group CSs (GCSs) and individual CSs at the beginning of the expansion process. The GCS moved outward faster than individual CS. Research results indicated that an AMF could reduce the tendency of formation of GCS. The effect of local plasma and global plasma, which could be significantly influenced by AMF, on the motion pattern and distribution of CSs in the initial expansion stage was investigated. [ABSTRACT FROM PUBLISHER]

Removing an oxide layer on a metal surface by vacuum arc has been preliminarily used in the metallurgical industry as an environment-friendly substitutor for the traditional acid-washing technique. In this paper, the influence of protection gas pressure on descaling process is investigated experimentally. Arc images taken by a high-speed digital camera indicated that the descaling rate was closely related to the motion pattern of cathode spots in different gas pressures. The decrease of descaling rate with the increase of gas pressure could be partly attributed to the formation of cathode-spot group and its less mobility at high gas pressure. The influence of gas pressure on the power density of cathode spot was also analyzed. It seemed that higher gas pressure would lead to the decrease of the ratio of power input into the cathode spot to the total arc power, which could also contribute to the decrease of the descaling rate. [ABSTRACT FROM PUBLISHER]

Much research has been done on the motion of low-current vacuum-arc cathode spots (CSs). The relationship between the motion velocity of CSs and the magnetic field, particularly the relationship between the direction of CS motion and the ratio of Bz/Bt, has been revealed. However, little investigation on the motion of CSs in high-current vacuum arcs has been conducted before. In this paper, the motion of CSs of high-current vacuum arcs under different axial magnetic fields was experimentally investigated. Simultaneously, calculation of the motion of CSs based on the empirical formula has been done, and comparison with experiments and analysis were given. Experiments were conducted in a detachable vacuum chamber with an arc current of 10 kA (root mean square). Images of CSs were photographed with a high-speed digital camera with an exposure time of 2 \mu\s. With computer-aided numerical processing, the spatial distribution of the CSs was obtained, based on which the magnitude and direction of the CS motion velocity were calculated, and the CS motion trajectories around the current peak were plotted. Results indicated that the properties of the CS motion in high-current vacuum arcs are similar to those in low-current vacuum arcs. [ABSTRACT FROM AUTHOR]

The anode melting in high-current vacuum arcs leads to the increase of metal vapor and liquid droplets around current zero and even the interruption failure. In our recent experiments of the cup-shaped axial magnetic field (AMF) contacts, an obvious clockwise swirl flow of the liquid copper was detected on the anode surface. However, if an additional external AMF which is reverse to the AMF generated by the contacts was introduced, the rotation direction of the liquid copper swirl flow on the anode surface could reverse to anticlockwise. These phenomena indicate that AMF has great influence on the performance of anode melting and its swirl flow. [ABSTRACT FROM AUTHOR]