Search

The quantification of the moistening deformation for wetting-sensitive unsaturated loess is of direct interest in regions implementing geotechnical engineering. Many constitutive models are available for describing the stress–strain behavior of unsaturated soils. However, few constitutive models directly describe moistening deformation. In this study, two types of triaxial tests were carried out on undisturbed loess. A triaxial compression test was conducted to determine the shear strength boundary of a specimen, and a triaxial moistening test with different stress ratios was used to study the moistening deformation law. The volumetric strain caused by moistening was used as the hardening parameter. A humidity variable was defined as the moisture level, and this parameter could reflect the moistening degree. The experimental rule and plastic theory were combined to establish the constitutive model. The model could directly calculate the deformation amount caused by moistening under different stress states. The model is applicable to the loess in the Guanzhong area in the Chinese Loess Plateau. [ABSTRACT FROM AUTHOR]

From 2011 to 2013, a mega project, known as the Gully Land Consolidation Project (GLCP), was implemented in the hilly gully region atop China's Loess Plateau. However, the GLCP involved large-scale slope excavation and gully backfilling that changed the local geological environment, which led to serious geohazards, such as erosion, soil salinization, and dam failure. In this study, various geohazards caused by the GLCP in the Gutun watershed (GTW) were investigated by combined remote sensing analysis, geophysical exploration, and field surveys, and the relationships between the hazards were also explored. According to the achieved results, increased soil erosion with an average doubling from 2018 to 2020 is widely distributed in the GTW. Furthermore, 195 areas containing clear evidence of salt precipitates were observed in some of the newly created arable lands, especially downstream of the dam. This was mainly attributed to the high water table, evaporation, and soluble salt concentration of the loess. Fifty-nine newly built silt dams, primarily located in the branch channels and at the gully mouth of the Gutun channel, broke in 2020. The osmotic damage and softening caused by the combined effect of the incomplete compaction of the dam body and concentrated heavy rainfall were the main reasons of the dam breaks. The different types of disasters in the GTW after the implementation of the GLCP show a strong spatial relationship that follows the surface water flow path and forms a disaster chain consisting of slope erosion, silt dam breaks, and the soil salinization of near-dam farmlands downstream. This disaster chain amplifies disaster risks and losses. These findings can guide the improvement of the GLCP and inform geohazard mitigation strategies in areas impacted by the GLCP. [ABSTRACT FROM AUTHOR]

A mega project, Mountain Excavation and City Construction (MECC), was launched in the hilly and gully region of the Chinese Loess Plateau in 2012, in order to address the shortage of available land and create new flat land for urban construction. However, large-scale land creation and urban expansion significantly alters the local geological environment, leading to severe ground deformation. This study investigated the topographic changes, ground deformation, and their interactions due to the MECC project in the Yan'an New District (YND). First, new surface elevations were generated using ZiYuan-3 (ZY-3) stereo images acquired after the construction in order to map the local topographic changes and the fill thickness associated with the MECC project. Then, the interferometric synthetic aperture radar (InSAR) time series and 32 Sentinel-1A images were used to assess the spatial patterns of the ground deformation in the YND during the postconstruction period (2017–2018). By combining the InSAR-derived results and topographic change features, the relationship between the ground deformation and large-scale land creation was further analyzed. The results indicated that the MECC project in the YND has created over 22 km2 of flat land, including 10.8 km2 of filled area, with a maximum fill thickness of ~110 m. Significant uneven ground deformation was detected in the land-creation area, with a maximum subsidence rate of approximately 121 mm/year, which was consistent with the field survey. The strong correlation between the observed subsidence patterns and the land creation project suggested that this recorded uneven subsidence was primarily related to the spatial distribution of the filling works, along with the changes in the thickness and geotechnical properties of the filled loess; moreover, rapid urbanization, such as road construction, can accelerate the subsidence process. These findings can guide improvements in urban planning and the mitigation of geohazards in regions experiencing large-scale land construction. [ABSTRACT FROM AUTHOR]

Quantitative estimation of rill erosion research plays a significant role in the understanding of rill formation and their development mechanisms, which is lacking presently. In this paper, rill erosion is quantified to analyze and evaluate the spatial and temporal distribution in typical gully heads of the Loess Plateau of China. Although several studies have carried rill erosion quantification, the variability analysis of rill erosion rates at different slope position is limited primarily because of the unavailability of high resolution elevation models. Using the low-altitude photography with Unmanned Aerial Vehicles (UAVs), digital surface models (DSMs) with centimeter accuracy were generated, and then geometrical parameters of a total of 1,129 rills at tableland-slope (T-S), hillslope (S), and slopes affected by artificial vegetation (SV) in the study were counted. Then, spatial and temporal development as well as erosion rates of the rills at the three sites were compared. Although many studies revealed the erosion law at the S position, few studies have linked the development of rills at the T-S position, and artificial afforestation at the SV position exacerbates the rill erosion. Furthermore, based on the centimeter-resolution DSMs obtained by the two-stage UAV photography, we found that the slope gradient which was the most susceptible to rill erosion were 5-10°, 35-50°, and 65-80° at T-S, S and SV sites, respectively. At the SV, rill incision was the most sensitive to slope changes, and rill incision potential proved to be the greatest. Generally, the higher the rill erosion depth, the smaller the frequency of occurrence, but this trend was mitigated at the SV position. Therefore, urgent action is needed to control rill erosion caused by artificial afforestation on hillslopes to alleviate and eliminate the adverse effects of vegetation planting on rill erosion on the Loess Plateau of China. [ABSTRACT FROM AUTHOR]