Search

The residence time of water in residential building water systems is a critical factor regarding water quality at end use. Published literature has highlighted the importance of water age in these systems and its relationship with pathogenic bacteria such as Legionella pneumophila. However, tools to measure water age in such plumbing systems are typically repurposed from other applications and include limitations that make them inappropriate for some plumbing systems. This work presents a novel means of estimating water age by assuming these systems operate without mixing. Data for this study was collected from a full-scale home equipped with an extensive array of flow meters to monitor water use. Further, 408 individual water quality samples were collected to ascertain water quality changes that take place in the plumbing. Model results show weak correlation with EPANET 2.2 (ρ = 0.666), a commonly used hydraulic modeling software. The results of the water age model were also evaluated with several variable selection tools. These analyses indicate that this method's water age results are a statistically significant (p < .05) predictor of Legionella concentrations. Model results from this approach could be used in plumbing design and/or operation to assist in managing Legionella risks. [ABSTRACT FROM AUTHOR]

Residential plumbing is critical for the health and safety of populations worldwide. A case study was conducted to understand fixture water use, drinking water quality and their possible link, in a newly plumbed residential green building. Water use and water quality were monitored at four in-building locations from September 2015 through December 2015. Once the home was fully inhabited average water stagnation periods were shortest at the 2nd floor hot fixture (90 percentile of 0.6–1.2 h). The maximum water stagnation time was 72.0 h. Bacteria and organic carbon levels increased inside the plumbing system compared to the municipal tap water entering the building. A greater amount of bacteria was detected in hot water samples (6–74,002 gene copy number/mL) compared to cold water (2–597 gene copy number/mL). This suggested that hot water plumbing promoted greater microbial growth. The basement fixture brass needle valve may have caused maximum Zn (5.9 mg/L), Fe (4.1 mg/L), and Pb (23 μg/L) levels compared to other fixture water samples (Zn ≤ 2.1 mg/L, Fe ≤ 0.5 mg/L and Pb ≤ 8 μg/L). At the basement fixture, where the least amount of water use events occurred (cold: 60–105, hot: 21–69 event/month) compared to the other fixtures in the building (cold: 145–856, hot: 326–2230 event/month), greater organic carbon, bacteria, and heavy metal levels were detected. Different fixture use patterns resulted in disparate water quality within a single-family home. The greatest drinking water quality changes were detected at the least frequently used fixture. [ABSTRACT FROM AUTHOR]