Search

To address the biosafety and biosecurity concerns related to the manufacture of inactivated polio vaccine (IPV), several manufacturers started producing it from attenuated Sabin strains. Slight immunological differences between wild and attenuated strains create a challenge for testing IPV potency, which is defined as the content of protective D-antigen determined in an ELISA test. Some ELISA reagents selected for testing conventional IPV made from wild strains (cIPV) may not be suitable for testing Sabin IPV (sIPV). This paper describes an ELISA procedure using human monoclonal antibodies selected to capture equally well both wild and attenuated strains of poliovirus. A unique monoclonal antibody neutralizing all three serotypes of poliovirus was used as the detection antibody. The method was shown to detect only D-antigen of both conventional and Sabin IPV and to be strictly serotype-specific. The method is highly sensitive and robust and produces linear results in a wide range of concentrations. We have also found that reference standards used for measuring potency of cIPV and sIPV must be made from respective vaccines. This makes it impossible to cross-calibrate potency reagents made from heterologous vaccine and requires the establishment of a new unit to measure potency of sIPV that is different from conventional D-antigen unit., (Published by Elsevier B.V.)

Poliovirus (PV) is the causative agent of poliomyelitis, a crippling human disease known since antiquity. PV occurs in two distinct antigenic forms, D and C, of which only the D form elicits a robust neutralizing response. Developing a synthetically produced stabilized virus-like particle (sVLP)-based vaccine with D antigenicity, without the drawbacks of current vaccines, will be a major step towards the final eradication of poliovirus. Such a sVLP would retain the native antigenic conformation and the repetitive structure of the original virus particle, but lack infectious genomic material. In this study, we report the production of synthetically stabilized PV VLPs in plants. Mice carrying the gene for the human PV receptor are protected from wild-type PV when immunized with the plant-made PV sVLPs. Structural analysis of the stabilized mutant at 3.6 Å resolution by cryo-electron microscopy and single-particle reconstruction reveals a structure almost indistinguishable from wild-type PV3.Despite the success of current vaccination against poliomyelitis, safe, cheap and effective vaccines remain sought for continuing eradication effort. Here the authors use plants to express stabilized virus-like particles of type 3 poliovirus that can induce a protective immune response in mice transgenic for the human poliovirus receptor.

The Global Polio Eradication Initiative (GPEI) has seen significant progress since it began in 1988, largely due to the worldwide use of oral poliovirus vaccine (OPV). In order to achieve polio eradication the global cessation of OPV is necessary because OPV contains live attenuated poliovirus, which in rare circumstances could re-gain wild poliovirus (WPV) characteristics with potential to establish transmission. The GPEI endgame strategy for the period 2013-2018 recommends the globally synchronised sequential cessation of the Sabin strains contained in the OPV, starting with type 2 Sabin. The withdrawal of Sabin type 2 took place in April 2016, with the introduction of at least one dose of inactivated poliovirus vaccine (IPV) as a risk mitigation strategy. The introduction of IPV into 126 countries since 2013 has required a rapid scale-up of IPV production by the two manufacturers supplying the global public sector market. This scale-up has been fraught with challenges, resulting in reductions of 40-50% of initial supply commitments. Consequently, 22 countries will not be supplied until 2018, and another 23 countries will experience serious stock-outs. In the last decade repeated calls-for-action were made to the global community to invigorate their vision and investment in developing "new poliovirus vaccines" including the development of IPV from less-virulent strains, such as Sabin-IPV (S-IPV). The conventional Salk-IPV production is limited to high-income industrialized-country manufacturers due to the containment requirements (i.e., high sanitation, low force-of-poliovirus-infection, and high population immunity). The use of Sabin strains in the production of S-IPV carries a lower biosafety risk, and was determined to be suitable for production in developing countries, expanding the manufacturing base and making IPV more affordable and accessible in the long term. Significant progress in the S-IPV has been made since 2006. S-IPV is now licensed as S-IPV in Japan and as standalone S-IPV in China, demonstrating the feasibility of this vaccine. In addition, production process improvements can further reduce the cost of production. The latter are critical to the economic success of this vaccine in the global market. We summarize the progress made to date in S-IPV technology, the scientific data and economic evidence in support of S-IPV development., (Copyright © 2016 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.)

The World Health Organization redefined the type 2 vaccine-derived poliovirus (VDPV) in 2010. To study the genetic characteristics and evolution of type 2 VDPV under this new definition, we conducted genome sequencing and analyses of type 2 VDPVs isolated from one patient with acute flaccid paralysis in Shanxi province (China) in 2014. Nucleotide sequencing revealed that the full-length of type 2 VDPV is 7439 bases encoding 2207 amino acids with no insertion or deletion of nucleotides compared with Sabin2. One nucleotide substitution identified as a key determinant of the attenuated phenotype of the Sabin 2 strain (A-G reversion at nucleotide nt 481 in the 5-end of the untranslated region) had reverted in the Shanxi type 2 VDPV. The other known key determinant of the attenuated phenotype of the Sabin 2 strain (U-->C reversion at nt2909 in the VP1 coding region that caused a Ile143Thr substitution in VP1) had not reverted in the Shanxi VDPV. The Shanxi type 2 VDPV was S2/S1 recombinant, the crossover site of which mapped to the 3-end of the 3D region (between nt 6247 and nt 6281). A phylogentic tree based on the VP1 coding region showed that evolution of the Shanxi type 2 VDPV was independent of other type 2 VDPVs detected worldwide. We estimated that the strain circulated for approximately = 11 months in the population according to the known evolution rate. The present study confirmed that the Chinese Polio Laboratory Network could discover the VDPV promptly and that it played an important part in maintenance of a polio-free China.

Highly divergent vaccine-derived polioviruses (VDPVs) have been isolated from sewage in Tallinn, Estonia, since 2002. Sequence analysis of VDPVs of serotypes 2 and 3 showed that they shared common noncapsid region recombination sites, indicating origination from a single trivalent oral polio vaccine dose, estimated to have been given between 1986 and 1998. The sewage isolates closely resemble VDPVs chronically excreted by persons with common variable immunodeficiency, but no chronic excretors have yet been identified in Estonia.

All viral RNA-dependent RNA polymerases (RdRps) have a conserved structural element termed motif D. Studies of the RdRp from poliovirus (PV) have shown that a conformational change of motif D leads to efficient and faithful nucleotide addition by bringing Lys-359 into the active site where it serves as a general acid. The RdRp of the Sabin I vaccine strain has Thr-362 changed to Ile. Such a drastic change so close to Lys-359 might alter RdRp function and contribute in some way to the attenuated phenotype of Sabin type I. Here we present our characterization of the T362I RdRp. We find that the T362I RdRp exhibits a mutator phenotype in biochemical experiments in vitro. Using NMR, we show that this change in nucleotide incorporation fidelity correlates with a change in the structural dynamics of motif D. A recombinant PV expressing the T362I RdRp exhibits normal growth properties in cell culture but expresses a mutator phenotype in cells. For example, the T362I-containing PV is more sensitive to the mutagenic activity of ribavirin than wild-type PV. Interestingly, the T362I change was sufficient to cause a statistically significant reduction in viral virulence. Collectively, these studies suggest that residues of motif D can be targeted when changes in nucleotide incorporation fidelity are desired. Given the observation that fidelity mutants can serve as vaccine candidates, it may be possible to use engineering of motif D for this purpose.

A type 2 vaccine-derived poliovirus (VDPV) (strain CHN1025), with a 1.1 % (10/903) difference from Sabin strain in the VP1 coding region, was isolated from a child with poliomyelitis caused by a poliovirus variant infection. The patient was from Shandong Province of China and developed acute flaccid paralysis in 1997. The child was infected with a rare and complicated penta-recombinant poliovirus with the uncommon genomic recombinant organization S2/S3/S1/S3/S1/S3. At least five successive rounds of recombination occurred in the VP1 capsid coding region and in the 2C, 3C (twice) and 3D(pol) non-capsid coding regions, respectively, during virus evolution. Strain CHN1025 had most of the characteristics of the type 2 vaccine strain; it had Sabin-specific epitopes, suggesting that the virus was antigenically indistinguishable from the Sabin 2 reference strain. Typical mutations in the 5'-untranslated region and VP1 associated with reversion to neurovirulence for Sabin 2 poliovirus were found, and the virus showed moderate neurovirulence in transgenic mice. A few nucleotide substitutions were located in the donor sequences, and two donor sequences contained no nucleotide substitutions, suggesting that these sequences were relatively new. The appearance of these mutations within approximately 192 days of at least five successive rounds of recombination events derived from a single ancestral infection illustrates the rapid emergence of new recombinants among VDPVs. This is the first report on the isolation of a type 2/type 3 poliovirus capsid recombinant with one of the five crossover sites located in the VP1 coding region.