Search

Biochar (BC) and nanoparticle-decorated biochar (NPs@BC) have emerged as potential high-performance function materials to facilitate simultaneous soil remediation and agricultural production. Therefore, there is an urgent need to incorporate environmental sustainability and human health targets into BC and NPs@BC selection and design processes. In contrast to extensive research on the preparation, modification, and environmental application of BC to soil ecosystems, reports about the adapted framework and material selection strategy of NPs@BC under environmental and human health considerations are still limited. Nevertheless, few studies systematically explored the impact of NPs@BC on soil ecosystems, including soil biota, geochemical properties, and nutrient cycles, which are critical for large-scale utilization as a multifunctional product. The main objective of this systematic literature review is to show the high degrees of contaminant removal for different heavy metals and organic pollutants, and to quantify the economic, environmental, and toxicological outcomes of NPs@BC in the context of sustainable agriculture. To address this need, in this review, we summarized synthesis techniques and characterization, and highlighted a linkage between the evolution of NPs@BC properties with the framework for sustainable NPs@BC selection and design based on environmental effects, hazards, and economic considerations. Then, research advances in contaminant remediation for heavy metals and organic pollutants of NPs@BC are minutely discussed. Eventually, NPs@BC positively acts on sustainable agriculture, which is declared. In the meantime, evaluating from the perspective of plant growth, soil characterizations as well as carbon and nitrogen cycle was conducted, which is critical for comprehending the NPs@BC environmental sustainability. Our work may develop a potential framework that can inform decision-making for the use of NPs@BC to facilitate promising environmental applications and prevent unintended consequences, and is expected to guide and boost the development of highly efficient NPs@BC for sustainable agriculture and environmental applications. Graphical Abstract

Graphene oxide (GO, a popular 2D graphene-based nanomaterial) has developed quickly and has received considerable attention for its applications in environmental protection and pollutant removal. However, significant knowledge gaps still exist about the interaction characteristic and joint toxicity mechanism of GO and cadmium (Cd) on aquatic organisms. In this study, GO showed a high adsorption capacity (120. 6 mg/g) and strong adsorption affinity (K

The union of Plant Growth-Promoting Bacteria (PGPB) and rhizosphere confers a series of functions beneficial to plant. However, the lack of an opearable in situ method limits the further understanding on the mechanism. In this study, a weak electric field was designed to regulate rhizospheric microflora in a constructed root-splitting reactor. Compared with the control, the aboveground and underground biomass of rice seedling increased by 17 % and 18 % (p0.05) respectively under the exist of weak electric field of 0.14 V/cm. The joint action of rhizosphere and PGPB displayed the detoxification ability in the condition of soluble petroleum hydrocarbons, where the height, stem diameter, biomass and root vigor of the plant was increased by 58 %, 32 %, 43 % and 48 % respectively than the control. The selective reproduction of endophytes and ectophytes (denitrifying, auxin-producing, hydrocarbon-degrading and electroactive bacteria) was observed under applied weak electric field, which enhanced the nitrogen utilization, cellular metabolic activity and resistance to toxic organics of plant. This was further confirmed by the up-regulated OTUs related to the hydrocarbon degradation function, tryptophan metabolism and metabolism of nicotinate and nicotinamide. Moreover, the weak electric field also enhanced the transfer ability of partial endophytes grown in the root to improve plant stress resistance. The results in this work inspired an exercisable method for in situ enrichment of PGPB in the rhizosphere to cope with food crisis and provided a new way to deal with sudden environmental events.

Considering the stability and economy of immobilized enzymes, this study prepared co-modified biochar immobilized laccase product named Fe

Polycyclic musks (PCMs) are widely used in daily chemical products, so their mass production and wide use enable them to enter the environment in various ways. Their lipophilicity and persi...

Many countries have developed university/college towns with specific characteristics (temporal, spatial, structural, and functional aspects). During the land development, there were obvious changes in soil metal levels and distribution patterns attributed to anthropogenic activities, thus having induced comparable results in university/college towns due to similar anthropogenic activities. Until now, specific studies on the metal status in university/college towns, especially the variation inside and outside of a campus were rarely involved. Herin we report on 109 soil samples around a new campus within a developing education park, in which the levels, spatial distributions, and possible sources of (alkali, alkaline‐earth, transition, and main group) metals and metalloids (Cd, Cr, As, Pb, Zn, Cu, Mn, Ba, Ni, Ti, Be, Bi, Sb, Sn, Co, V, and Zr) were systematically investigated. The Nemerow pollution indexes, spatial analysis, principal components analysis, and cluster analysis were calculated and analyzed. The results showed that the level of most metals within the campus with different functional areas (college, activity, and greening areas) was 1–1.3‐times as much as that outside in four directions and had greater variations. Moreover, the level of most metals was 1–1.5‐times as much as their background value and they distributed in the areas under specific developments and might mainly be attributed to anthropogenic sources. These findings provide the knowledge about effects of land development and anthropogenic activities on soil metal status that could be used by university/college towns in the similar context around the world.

Silver nanoparticles (AgNPs) are promising bactericidal agents and plasmonic NPs for environmental applications, owing to their various favorable properties. For example, AgNPs enables reactive oxygen species (ROS) generation, surface plasmon resonance (SPR), and specific reaction selectivities. In fact, AgNPs-based materials and their antimicrobial, optical, and electrical effects are at the forefront of nanotechnology, having applications in environmental disinfection, elimination of environmental pollutants, environmental detection, and energy conversions. This review aims to comprehensively summarize the advanced applications and fundamental mechanisms to provide the guidelines for future work in the field of AgNPs implanted functional materials. The state-of-art terms including (photo)(electro)catalytic reactions, heterojunction formation, the generation and attacking of ROS, genetic damage, hot electron generation and transfer, localized surface plasmon resonance (LSPR), plasmon resonance energy transfer (PERT), near field electromagnetic enhancement, structure-function relationship, and reaction selectivities have been covered in this review. It is expected that this review may provide insights into the rational development in the next generation of AgNPs-based nanomaterials with excellent performances.

Anhui province is a big agricultural province in China with regional heterogeneity, but there is still a lack of its regional soil-environmental quality standard for food safety and agricultural land protection. Herein, we collected 42 typical soil samples and 125 crop samples (roots, shoots and grains of wheat and rape) in the typical regions of northern, middle and southern Anhui province, and derived the regional criteria based on the current levels of eight metals (Cd, Cr, As, Pb, Hg, Cu, Zn, and Ni) as the basic items. Results showed that the metal concentrations in soil and crop samples varied with different Anhui regions and soil-crop systems. It was observed that there exists slight or moderate soil pollution (0.77-2.67), significantly higher concentrations (P0.05) in rape soils, generally higher concentrations (P0.05) in wheats, highest bioconcentration factor (BCF) in roots (0-9.570), and higher (P0.05) metal concentrations in the crops of southern and middle areas. The calculated regional soil-environmental quality criteria for Anhui province provided a new insight on developing regional soil-environmental quality criteria, which varied with different Anhui regions, and were ≥0.13-times lower than the screening values, except for Cd in the southern rape soil (0.351 mg/kg), but were generally higher for rape soils, except for Zn and As.

Over the past few decades, data-driven machine learning (ML) has distinguished itself from hypothesis-driven studies and has recently received much attention in environmental toxicology. However, the use of ML in environmental toxicology remains in the early stages, with knowledge gaps, technical bottlenecks in data quality, high-dimensional/heterogeneous/small-sample data analysis and model interpretability, and a lack of an in-depth understanding of environmental toxicology. Given the above problems, we review the recent progress in the literature and highlight state-of-the-art toxicological studies using ML (such as learning and predicting toxicity in complicated biosystems and multiple-factor environmental scenarios of long-term and large-scale pollution). Beyond predicting simple biological endpoints by integrating untargeted omics and adverse outcome pathways, ML development should focus on revealing toxicological mechanisms. The integration of data-driven ML with other methods (e.g., omics analysis and adverse outcome pathway frameworks) endows ML with widely promising application in revealing toxicological mechanisms. High-quality databases and interpretable algorithms are urgently needed for toxicology and environmental science. Addressing the core issues and future challenges for ML in this review may narrow the knowledge gap between environmental toxicity and computational science and facilitate the control of environmental risk in the future.

The transformation of silver ions (Ag

As typical pollutants, petroleum hydrocarbons that are widely present in various environmental media such as soil, water, sediments, and air, seriously endanger living organisms and human health. In the meantime, as a green environmental technology that integrates pollutant removal and resource recovery, bioelectrochemical systems (BESs) have been extensively applied to the removal of petroleum hydrocarbons from the environment. This review introduces working principles of BESs, following which it discusses the different reactor structures, application progresses, and key optimization factors when treating water, sewage sludges, sediments, and soil. Furthermore, bibliometrics was first used in this field to analyze the evolution of knowledge structure and forecast future hot topics. The research focus has shifted from the early generation of bioelectric energy to exploring mechanisms of soil remediation and microbial metabolisms, which will be closely integrated in the future. Finally, the future prospects of this field are proposed. This review focuses on the research status of bioelectrochemical degradation of petroleum hydrocarbons and provides a scientific reference for subsequent research.

Azo dye pollution has become a worldwide issue, and the current treatment methods can hardly meet the expected emission standards. Microbial electrochemical systems (MESs) show promising applications for decolorization, but their performance critically depends on the microorganisms. Electrode modification is an interesting method of improving decolorization performance. However, the mechanisms of how the modification can affect microbial communities and the decolorization process remain unclear. Here, a modified anode with polyaniline (PANI) and graphene was fabricated via electro-deposition. Consequently, the highest decolorization efficiency was obtained. The Congo red (CR) decolorization rate of the MESs with the PANI/graphene-modified electrode (PG) reached 90% at 54 h. By contrast, the CR decolorization rates of the MESs with the PANI-modified electrode (P) and those of the MESs with the unmodified electrode (C) only reached 68% and 79%, respectively. Results of the microbial community analysis showed abundant Methanobrevibacter arboriphilus in PG (11%), which was 5.5 times that in C (2%) at 18 h. This phenomenon may be related to the rapid decolorization. The upregulated metabolism pathways, including arginine and proline metabolism, purine metabolism, arginine biosynthesis, and riboflavin metabolism, provided more electron shuttles and redox mediators that facilitated the extracellular electron transfer. Therefore, the PG-modified electrode facilitated the decolorization by altering certain metabolic pathways. This study can help to improve the guideline on the potential application of MESs for wastewater treatment.

As an abundant and biologically active element, sulfur has been applied in various fields. Through the nanotechnology method, nanosulfur is synthesized with the merits of size effects. Differentiat...

Lakes are critical for biogeochemical and ecological processes and are sensitive and vulnerable to anthropogenic disturbances, but how and to what extent human activities disturb the biodiversity in lakes remain unknown. Here, we showed the microbial diversity in 46 lakes and assessed the influence of 27 anthropogenic factors. We found that the economic level (e.g., per capita gross domestic product) was strongly negatively correlated (r = -0.97) with bacterial diversity but positively correlated (r = 0.17) with fungal diversity in lakes. The composition of the microbial community significantly changed with increasing economic level. Bacteria are more sensitive than fungi to anthropogenic impacts. Expanding the population size and increasing the economic level may promote the development of fungal diversity but inhibit bacterial diversity. Air quality, urbanization and ozone were negatively correlated with bacterial diversity, and fisheries had a negative correlation with fungal diversity. The anti-interference ability of lake microorganisms in the middle economic level zones (45,000-90,000 yuan/person) was stronger than that in high-level (90,000 yuan/person) and low-level (45,000 yuan/person) economic zones. Overall, our investigation provides national-scale evidence that changes in the microbial diversity in lakes were related to economic levels.

As an important type of typical synthetic azo dyes, the use of sudan I-IV dyes has been of concern worldwide because of their wide applications and illegal addition into various foodstuffs, potentially resulting in water and soil pollution and having adverse effects on human health and ecosystems. However, to date, little has been reported regarding the environmental levels of these dyes and the risks that they pose to human health and ecosystems. Understanding the responses of soil enzymes, functional groups of bacteria and microbial communities to sudan dyes is of great importance to reveal their effect on the soil environment. In this study, we performed a toxicological study on the specific and overall effects of sudan I-IV dyes on the activity of soil enzymes including catalase, urease, and alkaline phosphatase after a 2- and 7-day exposure, functional groups of soil bacteria including nitrogen-fixing, ammonia-oxidizing, and denitrifying bacteria on day 14, and the structure and diversity of soil microbial community compositions on day 30. The results showed that sudan I-IV affected the activity of the soil enzymes, the abundance of the bacterium functional groups, and the structure and diversity of microbial community compositions, and the effects varied by sudan dyes I-IV, the exposure concentration, and the exposure time.

An experimental study on adsorption and desorption behaviors of rhodamine B (RhB) with/without cadmium ion (Cd2+) on a coastal soil was carried out in the face of the scarce studies on its environmental behaviors, especially its combined pollution with metal ions. The implications on mariculture and seafood safety, rarely concerned either, were also analyzed for providing a new insight between azo dyes and them. It showed that the adsorption of RhB on the tested soil was affected by Cd2+ and could be better fitted by the Freundlich model and dominantly identified as chemical adsorption according to the threshold of ΔG0 (40 kJ/mol). There is a positive hysteresis on the desorption of RhB, which was generally strengthened with the increasing concentration of RhB but generally weakened in the presence of Cd2+. The azo dyes including RhB and heavy metals such as Cd, as the major class of typical pollutants in coastal environment, are closely related to the mariculture and seafood safety. In the consideration of three aspects including potential pollutants for the mariculture, potential risks for seafood safety, and potential relationships between dyes and mariculture and seafood safety, their implications were further clarified.

Soils are a repository for polychlorinated biphenyls (PCBs). A pot incubation experiment was performed with four soils (black soil, paddy soil, oasis soil, and fluvo-aquic soil) treated with Aroclor 1242 to achieve PCB concentrations of 5 mg kg−1. The soil enzyme activities of protease, phosphatase, catalase, dehydrogenase, and laccase were determined by spectrophotometry. The soil bacterial communities were investigated using Illumina sequencing analysis. The results showed that the characteristics of the test soils varied among the soil types. The fluvo-aquic soil had the greatest PCB dissipation rate (86.41%), followed by the oasis (79.31%), paddy (56.09%), and black (50.65%) soils. The soil pH, cation exchange capacity, soil organic matter content, and particle diameter played significant roles in PCB dissipation from soils. The soil type had a greater influence than PCB contamination on the soil enzyme activities and bacterial communities (alpha diversity, community structure, and composition). Among the four soils, the bacterial communities of the fluvo-aquic soil were the most susceptible to PCB contamination. However, the bacterial communities of the black soil were not changed by PCB contamination.

Combined toxicity is a critical issue in risk assessment of contaminants. However, very little is known about the joint effects of graphene oxide (GO, a crucial 2-dimensional carbon material) and hexavalent chromium (Cr6+, a widespread heavy metal), particularly with respect to the critical period of embryogenesis. In this study, the combined toxicity of GO and Cr6+ was evaluated through embryo-larval toxicity test in Danio rerio (zebrafish). Results indicated that the co-exposure of Cr6+ (1 mg/L) and GO (0.01 mg/L) inhibited hatching and spontaneous movement of embryos, but no significant changes were found in the single Cr6+ or GO group. Compared with the single GO or Cr6+ exposure, their co-exposure (GO+Cr6+) significantly enhanced the teratogenicity in a concentration-dependent pattern, and the spinal curvature was observed as the main deformity. GO+Cr6+ changed the protein secondary structures of embryos result of the generation of ROS and oxidative stress. The degradations of vertical myosepta and cartilages were observed in co-exposure group, suggesting that GO+Cr6+ disrupted the development of musculoskeletal system. The genes col11a1a, col2a1a and postnb were down-regulated but the genes acta1b and mmp9 were up-regulated by GO+Cr6+. The interactions between Cr6+ and GO demonstrated that the morphology, structure, and surface properties of GO were modified by Cr6+. The enhanced defects and O-containing groups of GO could trap more β-sheets, induced oxidative stress, disturbed the development of skeletal muscles and cartilages in zebrafish. These data suggested that GO+Cr6+ enhanced their joint toxicity due to the variation of nanoparticle properties. This finding is important for assessing the ecological risk of graphene family nanomaterials in the natural environment.

At present, the uptake and accumulation of nanoplastics by plants have raised particular concerns. However, molecular mechanisms underlying nanoplastic phytotoxicity are still vague and insufficient. To address this scientific gap, we analyzed the transcriptome response of hydroponically grown wheat (Triticum aestivum L.) to polystyrene nanoplastics (PSNPs) (100 nm) by integrating the differentially expressed gene analysis (DEGA) and the weighted gene correlation network analysis (WGCNA). PSNPs could significantly shape the gene expression patterns of wheat in a tissue-specific manner. Four candidate modules and corresponding hub genes associated with plant traits were identified using WGCNA. PSNPs significantly altered carbon metabolism, amino acid biosynthesis, mitogen-activated protein kinase (MAPK) signaling pathway-plant, plant hormone signal transduction, and plant-pathogen interaction Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways. In addition, some Gene Ontology (GO) terms associated with the metal ion transport were further screened. These findings shed new light on the phytotoxic mechanism and environmental implication behind the interaction of nanoplastics and crop plants, and advance our understanding of the potential adverse effect induced by the presence of nanoplastics in agricultural systems.

Zeolitic imidazole frameworks (ZIFs) have attracted a considerable amount of attention for use in environmental applications (e.g., pollutant adsorption and photocatalysis in water treatments). The environmental stability and toxicity of ZIFs are key prerequisites for their practical applications, but information about these factors is largely lacking. The present work finds that pristine ZIFs (ZIF-8 and ZIF-67) photodegrade from frame structures into two-dimensional nanosheets and are oxidized to zinc carbonate (ZIF-8) and Co3O4 (ZIF-67) under visible-light irradiation. The photoinduced electrons, holes and free radicals promote dissolution of the metal cores and organic ligands, leading to collapse of the frame structure. The photodegradation of ZIF-8 alleviates developmental inhibition, oxidative stress, plasmolysis, and photosynthetic toxicity, while the photodegradation of ZIF-67 aggravates nanotoxicity. The integration of metabolomics and transcriptomics analysis reveals that unsaturated fatty acid biosynthesis and metal ion-binding transcription contribute to the altered toxicity of ZIF photodegradation. These findings highlight the roles of photodegradation in structural transformation and alteration of the toxicity of ZIFs, alarming the study of pristine metal-organic frameworks (MOFs).

Electroactive biofilm (EAB) sensor had shown great potential in the field of early warning of toxicants in water because of the low-cost and broad-spectrum. However, the traditional calculation of sensitivity strongly relied on the time and concentration gradient which weakened time-efficiency of the sensor. Moreover, the sensitivity could be further improved to respond trace concentrations. Here EAB sensors with different substrate concentrations were formed to respond different concentrations formaldehyde ranging from 1 ppm to 50 ppm and immediate current attenuation (ICA) was induced to evaluate the sensitivity. The ICA (~70 s) exhibited a shorter time than that calculated by calculable sensitivity (CS) and current attenuation (CA), which not only achieved the response of trace concentration but also improved the time-efficiency of the sensor. The EAB formed with 0.1 g/L acetate (EAB-0.1) had a 380% higher sensitivity than that formed with 1.0 g/L acetate (EAB-1.0), leading to a significant electrochemical toxicity response to 1 ppm of formaldehyde. The results of electrochemical response coefficient confirmed that EAB-0.1 was 1.5–6.3 times of that formed with acetate from 0.2 to 1.0 g/L, which was related with microbial community and component of EAB as described in our previous study. Our findings demonstrated that calculation of sensitivity could be optimized to reflect time-efficiency and EAB with limit acetate could be applied in trace toxicant detection.

Manure, soil, and vegetable samples were collected from different-sized livestock farms in Xinxiang, China. The residues of sulfadiazine, sulfamonomethoxine, and sulfamethoxazole were analyzed by high-performance liquid chromatography. The results indicated that the concentration ranges of the three total sulfonamides in manure, soil, and vegetables were 10.13–566.23 µg kg−1, 7.60–176.26 µg kg−1, and 0–32.70 µg kg−1, respectively. The mean concentrations were 219.71 µg kg−1, 70.73 µg kg−1, and 7.08 µg kg−1 for manure, soil, and vegetables, respectively. The mean concentrations in soil were lower than the ecotoxic effect trigger value (100 µg kg−1), indicating a low risk for organisms in soil. The concentrations of the three sulfonamides varied significantly in different types of vegetables and all were lower than the acceptable daily intake value (50 µg (kg day)−1). However, the potential ecotoxicity and danger to human and animal health via accumulation of the antibiotic in the food chain cannot be ignored.

Predicting the biological responses to engineered nanoparticles (ENPs) is critical to their environmental health assessment. The disturbances of metabolic pathways reflect the global profile of biological responses to ENPs but are difficult to predict due to the highly heterogeneous data from complicated biological systems and various ENP properties. Herein, integrating multiple machine learning models and metabolomics enabled accurate prediction of the disturbance of metabolic pathways induced by 33 ENPs. Screening nine typical properties of ENPs identified type and size as the top features determining the effects on metabolic pathways. Similarity network analysis and decision tree models overcame the highly heterogeneous data sources to visualize and judge the occurrence of metabolic pathways depending on the sorting priority features. The model accuracy was verified by animal experiments and reached 75%-100%, even for the prediction of ENPs outside of databases. The models also predicted metabolic pathway-related histopathology. This work provides an approach for the quick assessment of environmental health risks induced by known and unknown ENPs.

The increasing production and applications of graphene oxide (GO, a novel carbon nanomaterial) have raised numerous environmental concerns regarding its ecological risks. Triphenyl phosphate (TPhP) disperses in water and poses an increasing hazard to the ecosystem and human health. It is critical to study the environmental responses and molecular mechanisms of GO and TPhP together to assess both chemicals; however, this information is lacking. The present work revealed that GO promoted the bioaccumulation of TPhP in zebrafish larvae by 5.0%-24.3%. The TPhP-induced growth inhibition of embryos (malformation, mortality, heartbeat, and spontaneous movement) at environmentally relevant concentrations was significantly amplified by GO, and these results were supported by the downregulated levels of genes and proteins associated with cytoskeletal construction and cartilage and eye development. TPhP induced negligible alterations in the genes or proteins involved in oxidative stress and apoptosis, but those related proteins were all upregulated by GO. GO and TPhP coexposure activated the mTOR signaling pathway and subsequently promoted apoptosis in zebrafish by potentiating the oxidative stress induced by TPhP, presenting synergistic toxicity. These findings highlight the potential risks and specific molecular mechanisms of combining emerging carbon nanomaterials with coexisting organic contaminants.

Hydrolysis is generally considered as the main pathway for the degradation of ester-type pollutants in aquatic environments. In this study, we found that when methanol or ethanol presented as the external carbon in the activated sludge, transesterification is very important for the degradation of para-hydroxybenzoic acid esters (parabens). In the activated sludge solutions with 1% methanol added, contribution of transesterification to the degradation of the propyl substituted paraben (PrP) and ethyl substituted paraben (EtP) accounted for 46% and 83%, respectively, in the early stage of the reaction. This indicates that in aquatic environments with alcohols presence, parabens prefer to form small molecule homologues than hydrolysis to acid. The predominant transesterification in the activated sludge is related to enzyme preference. Amano lipase from Pseudomonas fluorescens was verified to catalyze hydrolysis and transesterification of parabens, while the latter was dominant in water solution with 1% methanol or ethanol. Considering the common application of small molecular alcohols as the external carbon sources in wastewater treatment plants, transesterification might be an important pathway for the degradation of parabens pollutants in these engineering aquatic environments.

Much attention has been paid to extracting and isolating specific and well-known nanoparticles (especially for engineered nanomaterials) from complex environmental matrices. However, such research may not provide global information on actual contamination because nanoscale fragments exist as mixtures of various elements and matrices in the real environment. The present work first isolated and characterized nanoscale fragments in effluents from municipal wastewater treatment plants (WWTPs). The nanoscale fragments were found to be composed of 70–85% carbon and low amounts of oxygen, heavy metals and other elements and exhibited nanosheet topographies (approximately 0.87–1.31 nm thickness and 68–187 nm lateral length). Because the isolated nanoscale fragments were mixtures rather than one specific type of nanoparticle, they were present at high concentrations ranging from 0.07 to 0.55 mg/L. It was also found that the accumulation of nanoscale fragments in rice reached 0.59 mg/g under exposure to environmentally relevant concentrations, leading to marked phytotoxicity (e.g., ultrastructural damage to chloroplasts and mitochondria). Metabolic analysis revealed the toxicological mechanisms to be related to disorders of carbohydrate, amino acid and fatty acid metabolism. This study is the first to characterize the properties and analyze the toxicity of nanoscale fragments in the effluents of WWTPs. Given that WWTP effluents containing nanoscale fragments are continuously discharged to the soil, surface water and seas, nanoscale fragment materials deserve considerable attention in future work compared with the few widely studied engineered nanoparticles.

Soil contaminated by aged petroleum hydrocarbons is faced with scarcity of electron acceptors, low activity of functional microbes and inefficient electron transfer, which hinder the bioremediation application. The soil microbial fuel cell (MFC) simultaneously solves these problems with bioelectricity production. In this study, five types of surfactants were introduced to enhance the bioavailability of aged petroleum hydrocarbon in soils. The ampholytic surfactant (lecithos) was optimal due to the highest bioelectricity generation (0.321C d −1 g −1 ) and promoted hydrocarbon degradation (328%), while the nonionic (glyceryl monostearate) and cationic (cetyltrimethylammonium bromide) surfactants were inefficient. The surfactants induced a special microbial enrichment affiliated with Proteobacteria , Firmicutes , Bacteroidetes , Actinobacteria , Chloroflexi , Planctomycetes and Acidobacteria (93%–99% of total) in soil MFCs. The anionic surfactant (sodium dodecyl sulfate) exhibited the strongest selectivity, and α- proteobacteria and γ - proteobacteria abundances decreased while Clostridia increased, much like the result obtained with the biosurfactant β -cyclodextrin. Furthermore, Bacillus abundance was increased in connected soil MFCs, except addition of lecithos in which Clostridium increased to 14.88% from 3.61% in the control. The high correlations among Bacillus , Phenylobacterium , Solibacillus (0.9162–0.9577) and among Alcaligenes , Dysgonomonas , Sedimentibacter (0.9538–0.9966) indicated a metabolic network of microorganisms in the soil bioelectrochemical remediation system.

Molybdenum disulfide (MoS2) poses great potential in water treatment as a popular transition metal dichalcogenide, arousing considerable concern regarding its fates and risk in aquatic environments. This study revealed that the interplay with extracellular polymeric substances (EPS) of freshwater algae significantly changed the properties and toxicity of MoS2 to aquatic fish. The predominant binding of aromatic compounds, polysaccharides, and carboxyl-rich proteins in EPS on the 1T polymorph of MoS2 via hydrophilic effects and the preferential adsorption of carboxylic groups contributed to morphological alterations, structural disorders (band gap and phase alterations), and the attenuated aggregation of MoS2 in aqueous solutions. Electron charge transfer and n-π* interactions with EPS decreased the catalytic activity of MoS2 by inhibiting its capability of generating reactive intermediates. The dissolution of MoS2 slowed down after interacting with EPS (from 0.089 to 0.045 mg/L per day) owing to rapid initial oxidation (i.e., forming Mo-O bond) and carbon grafting. Notably, the morphological and structural alterations after EPS binding alleviated the toxicity (e.g., malformation and oxidative stress) of MoS2 to infantile zebrafish. Our findings provide insights into the environmental fate and risk of MoS2 by ubiquitous EPS in natural waters, serving as valuable information while developing water treatment processes accordingly.

A review of the literature published in 2016 on topics relating to water reclamation and reuse is summarized. The review is divided into the following sections: 1) General: monitoring and assessment, social awareness and acceptance, and energy and resources recovery; 2) Treatment technology: integrated technologies, membrane treatment, reactors, WSPs, disinfection, and others; 3) Planning and Management: modeling, LCA, GHG emission, and case studies. Much of the water treatment research focused on the integrated technologies and membrane treatment.

Sudan I-IV as synthetic azo dyes have been concerned worldwide and ever caused a panic on food safety because of illegal addition into foodstuffs. In the past decades, various methods are being developed to identify and determine Sudan dyes in foodstuffs. However, relevant studies about their biogeochemical behaviors and potential environmental effects are rarely reported, although it is of great importance and necessity accounting for their potential environmental contamination from various sources. In this work, the experimental studies on adsorption behavior of Sudan I-IV acting on soil (10, 25, 50, 75, and 100 mg/L) were carried out, and their transport in soil compartments and between soil-water, and air-soil interfaces were discussed. Results showed that the amount of Sudan I-IV adsorbed on soil increased accordingly with the increasing concentration of Sudan dyes in aqueous solution, and Sudan II and IV were more likely adsorbed on the tested soils than Sudan I and III based on their maximum adsorption amount. However, for Sudan I, III, and IV, in some high concentrations (under the treatment of 75 mg/L for Sudan III, 100 mg/L for Sudan I and IV), the adsorption was significantly increased, and then came back to the "normal" level (under the treatment of 100 mg/L for Sudan III). It is expected that relevant researches on their biogeochemical behaviors in soil compartments, and between soil-water and air-soil interfaces would be concerned and addressed.

Arsenic (As) originating from natural and anthropogenic sources is an ubiquitous metalloid in soils, and can pose potential risks on human health and ecosystems. It is of great practical significance to carry out this study to prompt development or revision of soil-environmental quality standards, further to efficiently control its risks and hazards. Firstly, we briefly introduced the researching background of As soil-environmental quality criteria and standards. Secondly, we summarized the methods of deriving As soil-environmental quality criteria, respectively, based on its soil-environmental background values, ecotoxicological effects, accumulation, exposure models and soil-water partition equations. Thirdly, we reckoned and assessed the quantitative or qualitative relationships of As soil-environmental quality standards in various countries and regions according to land uses, tiers and extractants. In addition, the variation on soil-environmental quality standards was generally analyzed. Finally, we prospected the future researches on soil-environmental quality criteria and standards of As.

Effects of sewage sludge biochars (SSBCs) on the growth of wheat and the specific toxicological mechanisms were investigated from a metabolic perspective for better ecological risk assessment. We observed that conversion of sludge to biochar remarkably changed the properties, and also caused a significant (p 0.05) reduction of the toxicity towards wheat. Wheat growth under exposure to SSBCs was influenced by the pyrolysis temperature (300 °C, 500 °C and 700 °C), with root length being promoted by SSBCs prepared at higher temperatures (500 °C and 700 °C). In addition to the contaminants, including polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements (PTEs) detected in SSBCs, the morphological characteristics of biochars contributed substantially to the wheat growth. Metabolomics analysis revealed the remarkable differences in the metabolic profiles among the control (CK), SS300- and SS700-treated samples. The toxicological mechanisms involved were found to be associated with the regulation of metabolisms pathways of protein, fatty acids and carbohydrates, among which protein metabolism was most affected by SSBCs. This work presents an innovative concept that SSBCs produced at a proper temperature may minimize the toxic effects on plant growth by regulating the metabolic fluxes in vivo.

Graphene oxide (GO) will enter the soil environment in increasing amounts. The effects of GO on the dissipation of benzo[a]pyrene (B[a]P) from contaminated soil and their phytoremediation system have been explored in this study. B[a]P is a ubiquitous soil pollutant used as a representative indicator of polycyclic aromatic hydrocarbons. A pot experiment was performed to investigate the effects of GO or/and vegetation (Tagetes patula) on B[a]P dissipation and the associated bacterial communities in soil. The bacterial communities in soil were investigated by Illumina sequencing analysis. The presence of vegetation significantly enhanced the dissipation of B[a]P from soil. The addition of GO (100 mg/kg) significantly decreased the B[a]P dissipation. When vegetation and GO coexisted, the inhibition effects of GO on B[a]P dissipation were alleviated by vegetation. Compared with the control treatment, the presence of GO or vegetation had no significant effects on the richness and diversity of bacterial communities in B[a]P-contaminated soil. Compared with the presence of only vegetation, the richness and diversity all significantly decreased when vegetation and GO coexisted. And, vegetation had a greater influence on the bacterial community composition than GO. Vegetation alleviated the inhibition effects of GO on B[a]P dissipation and had a greater influence on the associated bacterial communities than GO. This work helps to understand the interactive effects of GO and vegetation on B[a]P dissipation and the associated bacterial communities in contaminated soil.

The environmental behaviors and risks associated with graphene oxide (GO, a popular 2D nanomaterial) have attracted considerable attention. GO released to aquatic systems will most likely interact with ubiquitous nanocolloids (Nc) in surface water. However, the effects of Nc on the fate and risk of GO remain largely unknown in water. Herein, the binding of Nc onto GO was investigated via electron microscopy, electron paramagnetic resonance, 2D correlation spectroscopy and biolayer interferometry. The results revealed that electron charge transfers, hydrophilic effects and π-π stacking contributed to a strong affinity (KD = 5.6 nM) and high adsorption capacity (159.8 mg/g) of Nc onto the GO surface. Moreover, GO nanosheets transformed to a scroll morphology or multiple GO particles bridging by Nc, which remarkably reduced the aggregation and sedimentation rates after binding with Nc. Interestingly, co-exposure with Nc greatly alleviated the toxicity (e.g., tail malformation, yolk sac edema and oxidative stress) of GO to zebrafish embryos. Morphological and structural alterations of GO after binding to Nc contributed to the mechanisms for the antagonistic effects on the zebrafish embryos toxicity. The present work provides insights into the environmental fate and risk of GO by ubiquitous Nc in natural water.

Rhizodegradation performed by plant roots and the associated bacteria is one of the major mechanisms that contribute to removal of petroleum hydrocarbons (PHCs) during phytoremediation. In this study, the pot-culture experiment using wild ornamental Hylotelephium spectabile (Boreau) H. Ohba was designed to explore responses and roles of roots, microbes, and degrading genes in the rhizodegradation process. Results showed that PHCs degradation rate by phytoremediation was up to 37.6–53.3% while phytoaccumulation accounted for a low proportion, just at 0.3–13.3%. A total of 37 phyla were classified through the high throughput sequencing, among which Proteobacteria, Actinobacteria, and Acidobacteria were the three most dominant phyla, accounting for >60% of the phylum frequency. The selective enrichment of PHC degraders with high salt-tolerance, including Alcanivorax and Bacteroidetes, was induced. Generally, relative abundance of the PHC degrading genes increased significantly with an increase in PHCs concentrations, and the gene copy number in the phytoremediation group was 1.46–14.44 times as much as that in the unplanted controls. Overall, the presence of PHCs and plant roots showed a stimulating effect on the development of specific degraders containing PHC degrading genes, and correspondingly, a biodegradation-beneficial community structure had been constructed to contribute to PHCs degradation in the rhizosphere.

Oil spills occur frequently worldwide, resulting in severe damage to water and to human health. Polycyclic aromatic hydrocarbons (PAHs) are the primary toxic components in oil contamination. PAH-degrading microbes have attracted significant attention, but difficulty in their selection and proliferation limits their applications. Graphene oxide quantum dots (GOQDs) improve the proliferation of an indigenous PAH-degrading strain, Bacillus cereus, more effectively than large graphene oxide flakes. Bacillus cereus can metabolize a variety of xenobiotic aromatic compounds as carbon sources and is used in bioremediation. GOQDs contain a variety of aromatic hydrocarbon structures, explaining why the bacteria achieve strong tolerance to PAHs. GOQD-activated cytokinesis increases the secretion of substances important for biofilm formation (extracellular polymeric substances), which further accelerates PAH removal. Proteomic analysis reveals the molecular mechanisms underlying GOQD-induced microbial proliferation. GOQDs induce the overexpression of microbial divisomal proteins associated with division initiation, DNA replication and peptidoglycan hydrolysis/synthesis. Importantly, PAH removal mediated by GOQD-treated Bacillus cereus does not require the addition of GOQDs. The effects of GOQDs on a strain persist for at least 20 generations, suggesting their possible use in low-cost applications. This work proposes a strategy to remove oil contamination using an indigenous bacterial system enhanced by nanomaterials.

With the wide use of graphene-like nanosheets, especially in agriculture, their release into the environment, it is crucial to grasp the fate of nanosheets in soil and minimum ecological risks. The present work discovered that leaching and migration of nanosheets (rGO) in soil is affected by soil porosity and adsorption processes. And the contents of rGO−Pd in soil layers and leachate increased and then decreased with the decreased of soil porosity. Moreover, physicochemical properties of rGO−Pd nanosheets changed by leaching processes, especially the changes of morphology, thickness and oxygen functional groups. Leaching of rGO−Pd also interfered the soil microbial homeostasis accompanied by the increase of microbial species richness and community diversity. In addition, rGO−Pd altered the usage of carbon sources by edaphon. The utilization of carbon sources by soil microbes, such as polymers, sugars, phenolic acids, carboxylic acids, amino acids, and amines, was also reduced by nanosheets. These findings provide new insights into environmental behaviors of nanomaterials and nanogeochemistry.

In the past two decades, more and more attentions have been paid to soil-derived greenhouse gases (GHGs) including carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) because there are signs that they have rising negative impacts on the sustainability of the earth surface system. Farmlands, particularly paddy soils, have been regarded as the most important emitter of GHGs (nearly 17%) due to a large influx of fertilization and the abundance in animals, plants and microorganisms. Geobacter, as an electroactive microorganism widely occurred in soil, has been well studied on electron transport mechanisms and the direct interspecies electron transfer. These studies on Geobacter illustrate that it has the ability to be involved in the pathways of soil GHG emissions through redox reactions under anaerobic conditions. In this review, production mechanisms of soil-derived GHGs and the amount of these GHGs produced had been first summarized. The cycling process of CH4 and N2O was described from the view of microorganisms and discussed the co-culture relationships between Geobacter and other microorganisms. Furthermore, the role of Geobacter in the production of soil-derived GHGs is defined by biogeochemical cycling. The complete view on the effect of Geobacter on the emission of soil-derived GHGs has been shed light on, and appeals further investigation.

Pot experiments were conducted to evaluate the phytoremediation of B[a]P contaminated soil using two ornamental plants (Tagetes patula and Mirabilis jalapa). The results showed that the dry biomass of two plants was increased at low B[a]P contaminated soil and then inhibited with increasing B[a]P concentrations. It exhibited a significantly positive linear relationship between B[a]P absorption in roots, stems, leaves and shoots of the tested plants and the concentration of B[a]P in soils (P