Search

A large amount of graphene-related research is its use as a filler for polymer composites, including thin nanocomposite films. However, its use is limited by the need for large-scale methods to obtain high–quality filler, as well as its poor dispersion in the polymer matrix. This work presents polymer thin-film composites based on poly(vinyl chloride) (PVC) and graphene, whose surfaces were modified by curcuminoids. TGA, UV–vis, Raman spectroscopy, XPS, TEM, and SEM methods have confirmed the effectiveness of the graphene modification due to π–π interactions. The dispersion of graphene in the PVC solution was investigated by the turbidimetric method. SEM, AFM, and Raman spectroscopy methods evaluated the thin-film composite's structure. The research showed significant improvements in terms of graphene's dispersion (in solutions and PVC composites) following the application of curcuminoids. The best results were obtained for materials modified with compounds obtained from the extraction of the rhizome of Curcuma longa L. Modification of the graphene's surface with these compounds also increased the thermal and chemical stability of PVC/graphene nanocomposites. [ABSTRACT FROM AUTHOR]

In this article, halloysite–lignin hybrid materials (HL) were designed and obtained. The weak hydrogen bonds found between the components were determined based on Fourier transform infrared spectroscopy (FTIR), proving the achievement of class I hybrid systems. The HL systems were characterized by very good thermal stability and relatively good homogeneity, which increased as the proportion of the inorganic part increased. This was confirmed by analyzing scanning electron microscope (SEM) images and assessing particle size distributions and polydispersity indexes. Processing rigid poly(vinyl chloride) (PVC) with HL systems with a content of up to 10 wt% in a Brabender torque rheometer allowed us to obtain composites with a relatively homogeneous structure confirmed by SEM observations; simultaneously, a reduction in the fusion time was noted. An improvement in PVC thermal stability of approximately 40 °C for composites with HL with a ratio of 1:5 wt/wt was noted. Regardless of the concentration of the HL system, PVC composites exhibited inconsiderably higher Young's modulus, but the incorporation of 2.5 wt% of fillers increased Charpy impact strength by 5–8 kJ/m2 and doubled elongation at break. This study demonstrated that favorable mechanical properties of PVC composites can be achieved, especially with an HL system with a ratio of 5:1 wt/wt. [ABSTRACT FROM AUTHOR]

In this work, a method to increase the dispersion of graphene (GN) in the matrix of rigid poly(vinyl chloride) (PVC) by using a natural plant extract from Curcuma longa L. (CE) is proposed. Currently, despite the increasing number of reports on the improvement of GN dispersion in PVC blends, still there is a need to find environmentally friendly and economical dispersion stabilizers. We proposed a stabilizer that can be easily obtained from a plant offering thermal stability and high effectiveness. PVC/GN nanocomposites stabilized with the proposed extract were investigated by SEM, AFM (structure), TGA, and Congo red test (thermal properties). Additionally, static and dynamic mechanical properties and electrical resistivity were measured. The use of CE as a graphene dispersant improved its dispersion in the PVC matrix, influenced tensile properties, increased the storage modulus and glass transition temperature, and extended the thermal stability time of nanocomposites. In this work, a CE extract is proposed as an efficient eco-friendly additive for the production of nanocomposites with an improved homogeneity of a nanofiller in the matrix and promising characteristics. [ABSTRACT FROM AUTHOR]

An advanced SiO2-lignin hybrid material was obtained and tested as a novel poly(vinyl chloride) (PVC) filler. The processing of compounds of poly(vinyl chloride) in the form of a dry blend with silica-lignin hybrid material and, separately, with the two components from which that material was prepared, was performed in a Brabender mixing chamber. An analysis was made of processing (mass melt flow rate, MFR), thermal (thermogravimetric analysis, Congo red and Vicat softening temperature test) and tensile properties of the final PVC composites with fillers in a range of concentrations between 2.5 wt % and 10 wt %. Additionally, the effects of filler content on the fusion characteristics of PVC composites were investigated. The homogeneity of dispersion of the silica-lignin hybrid material in the PVC matrix was determined by optical microscopy and SEM. Finally, it should be noted that it is possible to obtain a PVC composite containing up to 10 wt % of silica-lignin filler using a melt processing method. The introduction of hybrid filler into the PVC matrix results in a homogeneous structure of the composites and positive processing and functional properties, especially thermal stability and Vicat softening temperature. [ABSTRACT FROM AUTHOR]

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The thermal stability of PVC with 1 wt % of spherical porous nanosilica, prepared by roll milling at processing time varied from 1 to 20 min, was investigated by means of visual color changes, Congo red, and thermogravimetric tests (TGA and DTG), as a function of rolling time and composition of PVC matrix. The melt flow rate (MFR) measurements were realized to identify the degradation-induced changes of processing properties. A high level of gelation of the PVC matrix for all samples was verified by DSC (differential scanning calorimetry). It was found that the addition of porous nanosilica to absorb a certain volume of HCl, produced by dehydrochlorination reaction, leads to an improvement of thermal stability, an effect observed in a form of minor color changes of the samples, lower evolution of gas hydrogen chloride, and slight changes of the MFR value. It was demonstrated that the TGA measurements are not sufficiently sensible to detect the degradation of PVC at the processing conditions, i.e., at the temperature equal to 220 °C and below this temperature. [ABSTRACT FROM AUTHOR]

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The goal of the study was to prepare a graphene (GN) dispersion in a poly (vinyl chloride) (PVC) solution with enhanced stability of the nanofiller thanks to the application of curcuma extract (CE). The stable dispersion was used to obtain PVC/GN nanocomposites with more homogeneous graphene by the solvent evaporation method. The CE effectiveness was compared with two commercially available dispersants in the form of oleic acid (OA) and polysorbate 80 (P80). The chemical composition of the CE was examined by Fourier-transform infrared spectroscopy. The dispersion stability was tested by the multiple light scattering method (Turbiscan Lab) and evaluated visually over a period of 40 days. The homogeneity of the filler's dispersion in the PVC matrix was evaluated by scanning electron microscopy and Raman spectroscopy. The application of the dispersing agents led to improved stability of the graphene dispersion in PVC solution. CE was the agent that most effectively improved the homogeneity of graphene dispersion, both in dispersions in a PVC solution and in PVC/GN nanocomposite films. Image 1 • PVC nanocomposites with graphene were prepared by solution casting method with the use of dispersing agents. • The dispersion stability of graphene in PVC solution was tested by turbidimetric method.. • Structure and graphene dispersion level in PVC matrix were investigated by SEM and Raman spectroscopy. • The use of Curcuma longa L. rhizome extract has significantly improved GN dispersion in poly (vinyl chloride) matrix. [ABSTRACT FROM AUTHOR]

New foaming method, enhanced by microwave irradiation, was elaborated and applied to obtain porous poly(vinyl chloride) and its composites with fine cell structure. The so called “thermal runaway” effect was observed during the heating of poly(vinyl chloride) under microwave irradiation. The temperature of this effect decreases as a result of additives incorporation into polymer matrix. Microwave irradiation allowed effective heating of extruded poly(vinyl chloride) and its composites with carbon black (CB) filler, behind the extruder head and decomposing azodicarbonamide (ADC) to obtain porous products. The use of CB additive to poly(vinyl chloride) significantly increased its ability to be heated under microwave irradiation as well as improved the cell structure and decreased the apparent density of final products. Among additionally used fillers (1 wt%) the montmorillonite caused the apparent density decrease of foamed materials ca. 10%, however beneficially influenced on the quality of cells structure, giving the products with isotropic cells and the highest cell density as well as keeping the tensile strength on similar level as in the case of the materials with CB and ADC only. [ABSTRACT FROM AUTHOR]