Search

To date, despite the fact it represents a very important part of the national dairy production, no data are available concerning the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) in camel milk from the Republic of Kazakhstan. Selected PCDDs, PCDFs, and PCBs were measured in pools of milk from camels (n=15) located in various places of Kazakhstan (Almaty, Atyrau, Aralsk, Shymkent) and sampled at two different seasons for two different species (Camelus bactrianus and Camelus dromedarius). Non-dioxin-like (NDL-)PCB concentrations (6.3±2.7 ng g(-1) fat, median 5.1 ng g(-1) fat, range 0.6-17.4 ng g(-1) fat) were far below the maximum value of 40 ng g(-1) fat proposed by the EU. Dioxin-like (DL-)PCB concentrations (1.7±0.7 ng g(-1) fat, median 1.5 ng g(-1) fat, range 0.3-4.2 ng g(-1) fat) and the NDL-PCB to DL-PCB ratio (4.3) were similar to what is reported in EU for cow-based dairy products. PCB 52 and PCB 101 appeared to be proportionally more present in Kazakh camel milk samples (>60% of the sum of the 6 indicator NDL-PCBs) than in European cow milk samples (<10% of the sum of the 6 indicator NDL-PCBs), indicating possible differences in the route of exposure to PCBs in Kazakhstan. PCB 105 and PCB 118 appeared to be present at higher concentrations in camel milk (>80% of the sum of the 12 DL-PCBs). PCB 105, PCB 118 and PCB 156 were the major congeners for DL-PCBs, accounting for 92% of the sum of concentrations of DL-PCBs (88% for Belgian cows). In terms of TEQ, PCB 126 and PCB 118 are the major contributors and represent, respectively, 80% and 14% of the DL-PCB TEQWHO05 concentrations. No significant interracial or geographical trends were observed for NDL- and DL-PCB profiles. However, concentrations of all DL-PCBs appeared to be significantly higher for samples collected in Atyrau region. 2,3,7,8-TCDD level (mean 0.08±0.07 pg g(-1) fat, median 0.08 pg g(-1) fat, range 0.00-0.18 pg g(-1) fat, 60%>LOQs) were very low for all samples and 2,3,4,7,8-PeCDF was the major contributor (27%) to the PCDD/F TEQWHO05. Considering the total TEQWHO05 (sum of DL-PCBs and PCDD/Fs), DL-PCB and PCDD/F contributed for 73% and 27%, respectively. A decrease of only 1% of the total TEQ was observed when using the TEFWHO05 scale instead of the TEFWHO98 scale. Two samples collected in the region of Atyrau exceeded the EU maximum level value of 6.00 pg TEQWHO98 g(-1) fat (6.4 pg TEQWHO05 g(-1) fat and 6.9 pg TEQWHO05 g(-1) fat). Both samples exceeded the EU action level for the sum of DL-PCBs. Based on the fact that camel milk is used to prepare popular traditional fermented drinks like shubat, this suggests that the human exposure in the Caspian Sea region of Atyrau should be expected to be higher than in the other regions studied here., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.

The sintering process is among the major sources of the very toxic polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in the environment. At the industrial scale, it has been shown that dust collected on the grid, which supports the feed, contains PCDD/Fs amounts between the values found in the bottom of the cake and the values found on dust collected during gas sampling in the wind boxes. This fact suggests that the grid, containing 25wt.% of chromium, could have a catalytic activity in PCDD/Fs formation during the sintering process. This research tries to study this potential role. The de novo synthesis of PCDD/Fs is simulated at laboratory scale by thermal treatments of samples mixed with grid filings or Cr2O3. The thermal experiments performed with E.S.P. dust (dust collected in the electrostatic precipitator of a sintering plant) or graphite mixed with grid filings do not allow to confirm a role of the grid in PCDD/Fs formation during the industrial process. On the other hand, it has been shown that Cr2O3 can be considered as a catalyst in the de novo synthesis of PCDD/Fs. This compound takes place in the two steps of the de novo synthesis: the degradation of the carbon matrix as well as the chlorination reactions.

Twelve chickens raised according to commercial standards were fed a diet containing about 30 ng total toxic equivalent (TEQ)/kg for 10 weeks. Persistent pollutants were introduced into the poultry feed via recycled oil to mimic contamination conditions closely resembling those occurring during the Belgian crisis five years ago. Absorption of congeners with the same chlorination degree did not seem to depend on the substitution, demonstrating that unlike for cows, no preferential absorption for 2,3,7,8-substituted compounds could be remarked for chickens. As already observed, absorption decreased with increasing number of chlorines and was not linearly dependent on the octanol/water partition coefficient. On the other hand, no real differences were observed in the absorption of coplanar polychlorinated biphenyls (c-PCBs) with regard to degree of chlorination. When monitored during the course of experiment, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and c-PCBs in excreta reached an apparent steady state after 5 weeks. Only 2,3,7,8-substituted dioxins or furans were found in tissues and eggs. All organs showed the same congener profile and similar lipid-normalized concentration, except for the liver. Bioconcentration factors were evaluated, highlighting that the liver preferentially retained highly chlorinated congeners. No depletion of dioxin and PCB concentration was observed after 8 and 14 weeks of control diet, but high inter-individual variation occurs.

The sintering process is among the major sources of PCDD/Fs in the environment. This research studies the influence of the raw materials in this type of industrial plant on the amounts of PCDD/Fs generated. Particular interest is given to coke, which constitutes the principal source of carbon for the de novo synthesis of PCDD/Fs, and to the dust collected in the electrostatic precipitator (E.S.P. dust), usually recycled in the raw materials. The de novo synthesis of PCDD/Fs is simulated at the laboratory scale by thermal treatments of the samples. The use of a particular coke as a fuel does not drastically reduce the formation of PCDD/Fs. Actually, the global amounts of PCDD/Fs generated from the graphite and the two cokes tested are very similar. Only modifications in the fingerprint are observed. On the other hand, the addition of 10 wt % dust collected in the electrostatic precipitator leads to the formation of amounts of PCDD/Fs multiplied by a factor larger than 10(3). These results imply caution against the recycling of this E.S.P. dust in the raw materials.

Congener-specific analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) were performed on twenty-eight non-pooled fast food samples collected in Belgium, Switzerland, Czech Republic, United States of America and Australia. PCDD/F and PCB concentrations for the four investigated types of meals were very low. PCDD/F values ranged from non-detected to 1.40 pg WHO-TEQ/g fat and from 0.79 to 2.08 pg WHO-TEQ/g fat for lower and upper bound, respectively. Major contributors to the PCDD/F TEQ were 1,2,3,4,7,8-HxCDD, 1,2,3,6,7,8-HxCDD, 2,3,7,8-TCDF and 2,3,4,7,8-PeCDF. The relative contribution of PCBs to the total TEQ was 68%. For adults, an average estimated intake was 6.7 pg WHO-TEQ/kg bw/month, including consumption of all types of analyzed meals, representing 9.5% of the PTMI. For child, a value of 14.5 pg WHO-TEQ/kg bw/month was obtained, representing 20.6% of the PTMI.

Congener-specific analyses of 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs) and 4 non-ortho (coplanar) polychlorinated biphenyls (cPCBs) were performed on 35 samples of commercial long-life pasteurised cows' milk issued from eight different brands available in Walloon supermarkets (Belgium). The observed congener profile was characteristic of milk samples issued from industrialised countries with good inter and intra-brand reproducibility's. The PCDDs to PCDFs ratio was equal to 1.8 in concentration. The toxic equivalent (TEQ based on WHO-TEF) value for PCDD/Fs in all analysed milks was 1.09+/-0.30 pg TEQ/g fat (range 0.86-1.59), which is below the recommended EU non-commercialisation threshold value of 3 pg TEQ PCDD/Fs/g of milk fat. The mean TEQ value including cPCBs was 2.23+/-0.55 pg TEQ/g fat. These PCBs actually contributed for 49+/-8.6% of the total TEQ. Among PCDD/Fs and cPCBs, tetrachloro dibenzo-p-dioxin (TCDD), pentachloro dibenzo-p-dioxin (PeCDD), pentachloro dibenzofurans (PeCDFs) and 3,3',4,4',5-pentachloro biphenyl (PCB-126) were the most important contributors to the TEQ. Estimated daily intake (EDI) due to consumption of such milks was 0.34 pg TEQ/kg of body weight/day for PCDD/Fs and 0.69 pg TEQ/kg of body weight/day when cPCBs were included.

Congener-specific analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and non-ortho (coplanar) polychlorinated biphenyls (cPCBs) were performed on 20 non-pooled breast milk samples collected in or close to an industrial area of Wallonia (Belgium). PCDD/F concentrations ranged between 16.0 and 52.1 pg TEQ/g fat, with a mean value of 29.4 pg TEQ/g fat. If coplanar PCBs (77, 126, 169) are included in TEQ calculations, levels ranged between 22.2 and 100.2 pg TEQ/g fat, with a mean value of 40.8 pg TEQ/g fat. It appears that 2,3,7,8-TCDD, 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126 account for more than 90% of the TEQ. Estimated PCDD/F dietary intake is 76 pg TEQ/kg body weight (bw)/day. This value is almost 20 times higher than the World Health Organization tolerable daily intake. A value of 103 pg TEQ/kg bw/day represents the intake of PCDDs, PCDFs and cPCBs (no mono-ortho PCBs included).

Congener-specific analyses of 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs) and 4 non-ortho (coplanar) polychlorinated biphenyls (cPCBs) were performed on 197 foodstuffs samples of animal origin from Belgium during years 2000 and 2001. All investigated matrices (except horse) present background levels lower than the Belgian non-commercialization value of 5 pg TEQ/g fat. Pork was the meat containing the lowest concentration of both PCDD/Fs and cPCBs. The mean background concentration of 2,3,7,8-TCDD toxicity equivalent in milk was 1.1 pg/g of fat, with a congener distribution typical of non-contaminated milk. The relative contribution of 2,3,7,8-TCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDD and 2,3,4,7,8-PeCDF to the PCDD/Fs TEQ was 85+/-7.9% for all investigated matrices. The cPCBs contribution to the total TEQ was 47+/-19.0% for products of terrestrial species and 69+/-20.0% for aquatic species. Once the contribution of cPCBs was added to the TEQ, few foodstuffs such as horse, sheep, beef, eggs and cheese presented levels above the future European guidelines that currently only include PCDD/Fs but will be re-evaluated later in order to include 'dioxin-like' PCBs. Based on levels measured in the samples, the estimation of the dietary intake was 65.3 pg WHO-TEQ/day for PCDD/Fs only (1.00 pg WHO-TEQ/kg bw/day, for a 65 kg person) and 132.9 pg WHO-TEQ/day if cPCBs were included (2.04 pg WHO-TEQ/kg bw/day, for a 65 kg person). Meat (mainly beef), dairy products, and fish each account for roughly one third of the intake.

The polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are highly toxic compounds produced by some natural processes and different human activities. Waste incineration as well as steel and iron industries, in particular, the sintering process, are among the principal sources of these pollutants. In this paper, two inhibitors, triethanolamine (TEA) and monoethanolamine (MEA) are tested relating to their abilityto prevent the de novo formation of PCDD/Fs on sinter plant fly ash. The amounts of both PCDDs and PCDFs, formed by thermal treatment of the fly ash, decrease when inhibitors are added. The best results, up to 90% reduction of the PCDD/ Fs formation, are obtained when MEA is mixed with the fly ash at the highest concentration tested (2 wt %). The addition of inhibitors modifies the PCDFs/PCDDs ratios and, under some experimental conditions, the PCDD/Fs homologue distributions, suggesting that more than one pathway for the de novo formation of PCDD/Fs exist. On the other hand, no modification in the PCDD/Fs isomer distributions is observed as a result of the addition of inhibitors, in accordance with the possible thermodynamic control of these distributions. The temperature tested, 325 and 400 degrees C, does not affect the inhibition activity; however, longer reaction times (4 h instead of 2 h) give better percentages of PCDD/Fs reduction. The results suggest that the two inhibitors and especially MEA can reduce the PCDD/Fs formation on sinter plant fly ash under various conditions of temperature and reaction time, making them suitable for use in the real process. Tests performed in parallel at a real sinter plant are in good agreement with the laboratory experiments and confirm that the use of inhibitors is an appropriate technique for the prevention of PCDD/Fs emissions from sintering processes.

A fast clean-up procedure for the low level analysis of polychlorinated dibenzo-p-dioxins. polychlorinated dibenzofurans and coplanar polychlorinated biphenyls in highly fatty biological matrices using high capacity disposable multi-layer silica columns is presented. Results were compared with gel permeation chromatography for removal of lipids. Analytical criteria such as recovery rates, repeatability, reproducibility and robustness are evaluated through a broad range of biological matrices and reference materials analysis. The final proposed procedure for the complete analysis, including pressurized liquid extraction, Power-Prep system clean-up and GC-high-resolution MS analysis requires only 48 h, and allows the simultaneous preparation of up to 10 samples.

Rapid screening of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans using quadrupole ion storage tandem-in-time mass spectrometry (QISTMS) conjointly with polyclonal antibody immunoassay has been considered. The optimisation of the fragmentation of the parent ion in the trap has been completed. The analysis of fly ashes from a municipal waste incinerator contaminated at different levels has then been realised. Results obtained using QISTMS, HRMS and immunoassay are compared.

Fly ash, collected in the electrostatic precipitator of a sinter plant in Belgium, has been examined and characterized in terms of its behavior with respect to thermal polychlorodibenzo-p-dioxins (PCDD) and polychlorodibenzofurans (PCDF) formation. Thermal experiments of the fly ash were conducted in a flow of air. The temperature was varied from 250 to 450 degrees C, and the reaction time varied from 30 min to 6 h. For comparison, the oxidative degradation of carbon in the fly ash was studied by differential scanning calorimetry (DSC) in the temperature range from 50 to 500 degrees C. Besides the known maximum of formation of PCDD/Fs around 325 degrees C generally found on experiments with incinerator fly ash, a second maximum of formation around 400 degrees C is observed on the sinter fly ash used in this study. DSC measurements on the fly ash show that the oxidative degradation of carbon appears at these two different temperatures confirming that the de novo synthesis on this kind of fly ash take place at two different optimum temperatures. About the reaction time, already after 30 min, an important quantity of PCDD/Fs is formed; the fast increase in PCDD/Fs amount is followed by a slower formation rate between 2 and 4 h. At longer reaction time, the formation slows down, and decomposition reactions become important. Analysis of homologue distribution indicates that the profile of PCDD/Fs is independent of the reaction time but that an increase of the temperature leads to a rise of lower chlorinated species. In all experiments, PCDF are formed preferentially (total PCDF/PCDD ratios larger than 5). The PCDF/PCDD ratio is clearly independent of the reaction time. Concerning the temperature, the apparently better stability of PCDF at high temperature (PCDF/PCDD ratio higher at high temperature) results in the fact of different PCDF/PCDD ratios for the different family and modifications of homologue distribution with the temperature. The isomer distribution shows little reaction time or temperature dependency, which is an argument in favor of a thermodynamic control of the isomer distribution during de novo formation of PCDD/Fs. Differences within the isomer distribution patterns of PCDD/Fs obtained from the laboratory de novo synthesis experiments and the original fly ash, reflecting the formation under the industrial process, suggest a different mechanism of formation in the sinter plant for the PCDD and PCDF. The de novo synthesis is sufficient to explain the PCDF formation in the real process, but synthesis from precursors must play a role for the PCDD formation.