Search

Purpose: Polycyclic aromatic hydrocarbons (PAHs) represent a class of ubiquitous pollutants recognized as established human carcinogens and endocrine-disrupting chemicals. PAHs have seldom been modeled at the population-level in epidemiological studies. Fluoranthene is a prevalent PAH in urban settings and correlates with the occurrence of other PAHs. The purpose of this study was to evaluate associations between long-term residential exposure to ambient PAHs and breast cancer risk, both pre- and post-menopausal, in Canada., Methods: Using the National Enhanced Cancer Surveillance System (NECSS), a national-scale Canadian population-based case-control study, annual fluoranthene exposures were estimated using the GEM-MACH-PAH chemical transport model on the basis of geocoded residential histories throughout a 20-year exposure window. Odds ratios (ORs) and 95% confidence intervals (CIs) controlling for potential confounders were estimated using logistic regression. Separate analyses were conducted for Ontario and national samples given a finer-resolution exposure surface and additional risk factor information available for Ontario., Results: Positive associations were observed between fluoranthene exposure and premenopausal breast cancer, with inconsistent findings for postmenopausal breast cancer. For premenopausal breast cancer, adjusted ORs of 2.48 (95% CI: 1.29, 4.77) and 1.59 (95% CI: 1.11, 2.29) were observed when comparing the second highest category of exposure to the lowest, among the Ontario and national samples, respectively. For postmenopausal breast cancer, adjusted ORs were 1.10 (95% CI: 0.67, 1.80) and 1.33 (95% CI: 1.02, 1.73). Associations for the highest level of exposure, across both samples and menopausal strata, were non-significant., Conclusion: This study provides support for the hypothesis that ambient PAH exposures increase the risk of premenopausal breast cancer., (© 2024. The Author(s).)

Polycyclic aromatic compounds (PACs) in Canadian air and deposition were examined at the national scale for the first time in over twenty-five years. Air concentrations spanned four orders of magnitude, and were highest near industrial emitters and lowest in the Arctic. Declines in unsubstituted PAHs were observed at locations close to industrial facilities that had reduced emissions, but trends elsewhere were modest or negligible. Retene concentrations are increasing at several locations. Ambient concentrations of benzo[a]pyrene exceeded Ontario's health-based guideline in many urban/industrial areas. The estimated toxicity of the ambient PAC mixture increased by up to a factor of six when including compounds beyond the US EPA PAHs. Knowledge of PAC deposition is limited to the Laurentian Great Lakes and Athabasca Oil Sands regions. The atmosphere remained a net source of PAHs to the Great Lakes, though atmospheric inputs were decreasing with halving times of 26-30 years. Chemical transport modelling substantially overestimated wet deposition, but model performance is unknown for dry deposition. Sources from Asia, Europe and North America contributed to Arctic and Sub-Arctic concentrations, whereas transboundary or long-range transport have not been assessed outside Canada's north. Climate-related impacts from re-emission and forest fires were implicated in maintaining air concentrations in the high Arctic that were not consistent with global emissions reductions. Industrial emission decreases were substantial at the national scale, but their influence on the environment was limited to areas near relevant facilities. When examined through the lens of ambient levels at the local scale, evidence suggested that contributions from residential wood combustion and motor vehicles were smaller and larger, respectively, than those reported in national inventories. Future work aimed at characterizing PACs beyond the EPA PAHs, improving measurement coverage, elucidating deposition phenomena, and refining estimates of source contributions would assist in reducing remaining knowledge gaps about PACs in Canada., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2020. Published by Elsevier Ltd. All rights reserved.)

Twenty-five years after the first look at polycyclic aromatic compounds (PACs) in Canada, this article presents current knowledge on Canadian PAC emission sources. The analysis is based on national inventories (the National Pollutant Release Inventory (NPRI) and the Air Pollutant Emissions Inventory (APEI)), an analysis of Canadian forest fires, and several air quality model-ready emissions inventories. Nationally, forest fires continue to dominate PAC emissions in Canada, however there is uncertainty in these estimates. Though forest fire data show a steady average in the total annual area burned historically, an upward trend has developed recently. Non-industrial sources (home firewood burning, mobile sources) are estimated to be the second largest contributor (∼6-8 times lower than forest fires) and show moderate decreases (25%-65%) in the last decades. Industrial point sources (aluminum production, iron/steel manufacturing) are yet a smaller contributor and have seen considerable reductions (90% +) in recent decades. Fugitive emissions from other industrial sources (e.g. disposals by the non-conventional oil extraction and wastewater sectors, respectively) remain a gap in our understanding of total PAC emissions in Canada. Emerging concerns about previously unrecognized sources such as coal tar-sealed pavement run-off, climate change are discussed elsewhere in this special issue. Results affirm that observations at the annual/national scale are not always reflective of regional/local or finer temporal scales. When determining which sources contribute most to human and ecosystem exposure in various contexts, examination at regional and local scales is needed. There is uncertainty overall in emissions data stemming in part from various accuracy issues, limitations in the scope of the various inventories, and inventory gaps, among others., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2020. Published by Elsevier Ltd. All rights reserved.)

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography - flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ 13 C, δ 2 H) and radiocarbon (Δ 14 C) isotope analysis are considered. Using as an example research carried out in Canada's Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2020. Published by Elsevier Ltd. All rights reserved.)

Polycyclic aromatic hydrocarbons (PAHs) are toxic compounds that are ubiquitous in the atmospheric environment. The input for an emissions processing system that was originally configured forthe study of criteria air pollutants was updated to calculate emissions of six semivolatile PAHs. The goal of the work was to produce emissions estimates with the spatial and temporal resolution needed to serve as input to a regional air quality model for southern Canada and the U.S. Such modeling is helpful in determining reductions in PAH emissions that may be necessary to protect human and ecosystem health. The total annual emission of the six PAHs (sigma6PAH) for both countries was estimated at 18 273 Mg/year. A total of 90% of these emissions arise from U.S. sources. The top six source types account for 73% of emissions and are related to metal production, open burning, incineration, and forest fires. The emission factors used in this study were derived from published compilations. Although this approach has the advantage of quality control during the compilation process, some compilations include factors from older studies that may overestimate emissions since they do not account for recent improvements in emission control technology. When compared to estimates published in the National Emissions Inventory (NEI) for 2002, the U.S. emissions in this study are higher by a factor of 4 (16 424 vs 4102 Mg/year). The cause of this difference has been investigated, and much of it is likely due to our use of data unavailable in the 2002 NEI but inferred here on the basis of the PAH emissions literature. Augmenting the 2002 NEI with this additional information would bring its reported annual emissions to 8213 Mg/year, which is within a factor of 2 of the estimates herein. The results presented for southern Canada are the first published values for all known PAH sources in that country.