Search

A simple and novel method for the deposition of polypyrrole (PPy) and cellulose nanocrystal (CNC) composites on different fiber substrates by reactive ink-jet printing was proposed. PPy/CNCs composites were successfully prepared, and the surface resistance of conductive layer deposited on different fiber substrates is the least when the monomer concentration is 0.6 M. PPy/CNCs were deposited on polyethylene terephthalate (PET) to form a conductive layer by adding polyvinyl alcohol (PVA), and the optimum sintering temperature is 100 °C (monomer/PVA ratio 4.0, conductivity 0.769 S cm−1). The PPy/CNCs conductive layer deposited on the paper has the lowest surface resistance and the best adhesion, and the surface resistance of PPy/CNCs conductive layer decreases first and then increases with the increase of sulfonate concentration. Moreover, the volume of anion in sulfonate will affect the arrangement and aggregation of PPy molecular chain in composite materials. Appropriate sulfonate doping can improve the conductivity and stability of conductive paper, and the maximum conductivity is 0.813 S cm−1. Three devices based on PPy/CNCs conductive paper were proposed and fabricated. Therefore, this ink-jet printing provides a new method for the preparation of conductive materials, sensors, energy storage and electromagnetic shielding, etc. [ABSTRACT FROM AUTHOR]

In this work, a polyaniline film was synthesized on the surface of ITO (indium tin oxide)–PET (polyethylene terephtalate) plastic substrate by cyclic voltammetry electrochemical method to prepare a transparent flexible counter electrode. Then, the surface growth mechanism of polyaniline film was analyzed, and the AC impedance and cyclic voltammetry curves were tested. The dye‐sensitized solar cell (DSSC) device was assembled for photocurrent density‐voltage curves (J‐V) test, and the photoelectric performance of the flexible polyaniline counter electrode was further discussed. All of the above tests were compared to electrochemically deposited Pt electrodes. The results show that the polyaniline has a larger specific surface area for the electrode, which is more conductive to the catalytic reduction of the iodide on the electrode. Moreover, its porous structure is more conductive to the diffusion and reaction of I-/I3- redox couples. Under the influence of dense layer and porous structure of polyaniline film, the cell performance of 25‐sweep‐segment polyaniline counter electrode is the best. Comparing with the conventional Pt electrode, the flexible counter electrode prepared by electrochemical synthesis not only has the same performance, but also reduces the cost by about 40 %, which is of great significance for promoting the application of DSSC. [ABSTRACT FROM AUTHOR]