Search

A series of novel soluble polyimides was synthesized from commercially available 2,4,6-triaminopyrimidine (TAP), 2,2-bis(3,4-dicarboxylphenyl) hexafluoropropane dianhydride (6FDA), α,ω-aminopropylpoly(dimethylsiloxane) and 1,3-bis(3-aminophenoxy)benzene. TAP is the branched monomer, and polymerization process had been improved in three ways by using TAP to prepare soluble polyimides. The polyimides were characterized by Fourier transform infrared spectra, proton nuclear magnetic resonance, ultraviolet–visible spectrometer analysis, wide-angle X-ray diffraction, and size-exclusion chromatography with multiangle laser light-scattering detection. The branched polyimides showed excellent solubility both in strong polar solvents and in common low-boiling point solvents. Differential scanning calorimetric and thermogravimetric analyses showed high glass transition temperatures and excellent thermal stability for branched polyimides with moderate content of TAP. Polyimide membranes were formed at relatively low temperature, and the mechanical properties were tested. These results ensure that soluble polyimides with moderate content of TAP showed outstanding combined features and are desirable candidate materials for advanced applications. [ABSTRACT FROM AUTHOR]

ABSTRACT A series of highly soluble aromatic polyimides with excellent thermal properties were fabricated by traditional two-step polycondensation reaction of dianhydride monomer 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride) or 4,4-(hexafluoroisopropylidene)diphthalic anhydride with diamine monomer 1,3-bis(4-aminophenoxy)benzene or 1,3-bis(3-aminopropyl) tetramethyldisiloxane in N,N-dimethylacetylamide solvent. Results revealed that copolyimide of PI-4 containing trifluoromethyl and tetramethyldisiloxane possessed excellent solubility and remarkable thermal properties. PI-4 could dissolve well in common low boiling point solvents such as THF of up to 80 mg/mL and acetone of 40 mg/mL. Moreover, the 10% weight loss temperature of the PI-4 was 539°C and the Tg value of the PI-4 was 311°C. PI-4 might be easily cast into flexible and tough films applied in optoelectronic devices. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41713. [ABSTRACT FROM AUTHOR]

Silicon (Si)-containing polyimides (PIs) with superior atomic oxygen (AO) resistance are promising materials for space applications. Here, in this study, we present the synthesis and characterization of eight Si-containing PI thin films and evaluate their AO durability. The resulting PI films exhibited high thermal stability and preferable AO resistance but showed slightly reduced mechanical performance relative to pristine PI. The highest optical transparency at 550 nm was observed for PI/octaaminopropylsilsesquioxane, while the lowest value was observed for PI/silica (SiO2) hybrids. X-Ray photoelectron spectroscopic study suggested that the topmost surface of PI was degraded at the early stage and an SiO2 inert protective layer was finally formed on the surface of hybrid films after AO exposure. It is found that Si-containing units of higher oxidation states and with higher Si/O molar ratio are favorable to improve the AO resistance. Dispersion of Si at molecular level contributes to improving anti-AO property as well as optical transparency of the prepared films. The characterization of scanning electron microscopy indicated a continuous SiO2 protective layer was crucial to prevent AO from eroding the bulk matrix. [ABSTRACT FROM AUTHOR]

A series of hyperbranched polyimides were successfully synthesized by condensation polymerization of A2-type dianhydride monomer 2,2-bis(3,4-dicarboxylphenyl) hexafluoropropane dianhydride (6FDA) and B′B2-type triamine monomer 2,4,6-triaminopyrimidine (TAP). Polymers with different branching degrees (DB) and terminated groups were obtained by changing the monomer addition order and the monomer molar ratio. Fourier transform infrared spectroscopy and 1H NMR were used to verify the structure of the prepared polyimides, which indicated that the amino group still existed in all the products. The DB of the polymers indicated by 1H NMR increased from 30% to 79% with the molar ratio of TAP:6FDA decreasing from 1:1 to 1:2. The absolute molecular weights were measured by size-exclusion chromatography with multi-angle laser light-scattering detection, which suggested that the highest molecular weight would be obtained when the molar ratio of amino groups:anhydride groups of the monomers was 3:3.2. With the DB increasing, the d-spacing values indicated by wide angle X-ray diffraction increased from 5.15 Å to 5.68 Å and the UV − visible spectra of the polymers exhibited decreasing cut-off wavelengths. The 5% weight loss temperature in nitrogen increased with decreasing content of TAP monomer, and the glass transition temperatures of the obtained polyimides decreased from 282 °C to 258 °C with increasing DB. © 2013 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Abstract: A series of hyperbranched polyimides were successfully synthesized by A2+B2B′+B2 copolymerization from 2,2-bis(3,4-dicarboxylphenyl) hexafluoropropane dianhydride (6FDA), 2,4,6-triaminopyrimidine (TAP) and 4,4′-oxydianiline (ODA). Self-standing polyimides membranes with sufficient mechanical properties were achieved by incorporation of difunctional B2 comonomer into the hyperbranched polymer structure. The degree of branching was estimated using 1H NMR spectroscopy. The morphology structure of the prepared polyimides was evaluated by wide-angle X-ray diffraction patterns, and the d-spacing values first increased gradually to the highest value 5.73Å with increasing the content of TAP, and then decreased. The densities of these films were tested and the difference in density is probably due to the different inter-macromolecular packing efficiency. Both the 5% weight loss at temperatures and the glass transition temperatures (Tg) of the obtained polyimides decreased with decreasing the content of ODA comonomer. Similar tendency was found for tensile strength and elongation at break. Gas transport measurements showed the prepared TAP–ODA–6FDA hyperbranched polyimides exhibited lower permeabilities compared with ODA–6FDA linear polyimides, but higher O2/N2 and CO2/N2 selectivities. So they are expected to apply in the field of gas separation. [Copyright &y& Elsevier]