Search

In this work the thermally-activated shape memory response of biodegradable nanocomposites based on PLA/PCL blend reinforced with different type of cellulose nanocrystals has been reported, and compared with those of the neat matrix, at the same transition temperature of 55 °C and at the same different deformations, 50%, 100% and 150%. In particular, cellulose nanocrystals have been synthesized and then functionalized by “grafting from” reaction by ring opening polymerization of both PLLA and PCL using the OH groups onto the cellulose nanocrystals surface as initiators for the reaction. The morphology, thermal and mechanical analysis have been performed in order to obtain the parameters for the thermo-mechanical shape memory cycles. Moreover, the addition of the CNC-based nanofillers on the compatibility of PLA-PCL blends in 70:30 proportion has been evaluated. All the biodegradable nanocomposite formulations showed excellent shape memory response, similar to those of the neat matrix, with strain recovery ratio and strain fixity ratio higher than 80% and 90%, respectively. This fact indicates that in this case, the shape memory response of the nanocomposites is mainly controlled by the response of the neat blend and they are slightly influenced by the increase of compatibility between the components of the blend. In addition, all nanocomposite films were fully disintegrated under composting conditions confirming their biodegradable nature, obtaining that the presence of CNC-based nanofillers speeds up the disintegration rate of the nanocomposites in comparison with the pure matrix. [ABSTRACT FROM AUTHOR]

In this work, the effect of the addition of different amount of nanosized hydroxyapatite (nHA) on the shape memory behavior of blends based on poly (lactic acid) (PLA) and poly (ε-caprolactone) (PCL) has been studied. In particular PLA/PCL blend with 70 wt % PLA has been reinforced with 0.5, 1 and 3 wt % nHA. Moreover, the relationship between the morphology and the final properties of the nanocomposites has been investigated by field emission scanning electron microscopy, confocal Raman spectroscopy and atomic force microscopy. In particular, PeakForce has been used to study quantitative nanomechanical properties of the multifunctional materials leading to conclusion that nHA increase the phase separation between PLA and PCL as well as act as reinforcements for the PCL-rich phase of the nanocomposites. Furthermore, excellent thermally-activated shape memory response has been obtained for all the nanocomposites at 55 °C. Finally, the disintegration under composting conditions at laboratory scale level was studied in order to confirm the biodegradable character of these nanocomposites. Indeed, these materials are able to be used for biomedical issues as well as for packaging applications where both thermally-activated shape memory effect and biodegradability are requested. [ABSTRACT FROM AUTHOR]

Blending commercial homopolymers represents a low cost and an easy scalable process to extend the use of the pristine homopolymers to an industrial level. Actually, the processing of blends by extrusion is the usual solution followed in the industry. However, commonly polymer blends are immiscible, provoking phase separation, which can be in the macro, micro or nano scale, depending on the polymers as well as on the processing conditions, affecting the final properties of the blends. Therefore, this paper aims to study the shape memory behavior in biodegradable blends based on poly(lactic acid) (PLA) and poly(ε-caprolactone) (PCL) in different concentrations. A completely thermal and mechanical characterization of the blends was performed, correlating the results with the observed morphology. In addition, two different biodegradation studies were performed in order to correlate the effect of each homopolymer with the degradation behavior of the biodegradable blends. [ABSTRACT FROM AUTHOR]

In this work, the polymerization of Limonene Oxide (LO) has been achieved using an Earth abundant metal-based catalyst developed in our group, that is very active in ring opening polymerization (ROP) processes. The bio-based polylimonene ether (PLO) obtained had low molecular weight and good thermal properties, thus being a potential green polymeric additive for other bio-based polymers such as PLA. Hence, we have explored its ability to influence PLA properties. The addition of only 10 wt %, led to the modification and improvement of PLA properties in terms of flexibility, thermal stability, and hydrophobicity. The results obtained are promising and open up the potential industrial application of PLO for the melt-processing of blends based on PLA/PLO. These new materials are totally based on renewable sources and may be interesting for many applications where biodegradability and reduced water adsorption is required, such as food packaging or agricultural mulch films. Image 1 • Polymerization of Limonene Oxide was achieved with an aluminium catalyst. • PLO is an efficient green additive for PLA able to modify its properties. • PLO increase the flexibility, the thermal stability and the surface hydrophobicity of PLA. • PLO is a promising industrial plasticizer totally derived from renewable sources. • PLA/PLO blends can be used for potential agricultural applications. [ABSTRACT FROM AUTHOR]

The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in T g and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA. [Display omitted] • Polymerization of bio-based monomers (myrcene and anethol) using titanium catalysts is presented. • The bio-based polymyrcene and polyanethol obtained, were used as modifiers for poly(lactic acid) (PLA). • It was found that polymyrcene acts as a plasticizer, reducing the fragility of pure PLA. • However, polyanethol completely inhibits PLA crystallization. [ABSTRACT FROM AUTHOR]