Search

Solvent additives are pivotal for enhancing the morphology, efficiency, and stability of organic solar cells (OSCs). However, the widely used additive, 1,8‐diiodooctane (DIO), has drawbacks like harmful halogen content and potential OSC degradation. To address these issues, novel non‐halogenated, thienyl‐alkyl‐thienyl structural solvent additives—DTP, DTH, and DTN—featuring varying alkyl linker lengths of (CH2)3, (CH2)6, and (CH2)9, respectively are introduced. Additives with longer alkyl linkers, DTH and DTN, effectively dissolve and strongly interact with both the donor polymer PM6 and acceptor L8‐BO. This dual interaction enables precise tuning of their microstructures, resulting in enhanced crystallinity. Upon incorporating DTH as an additive in OSCs (PM6:L8‐BO), a minimal voltage loss is observed, leading to an impressive efficiency of 18.51%, surpassing the 17.90% achieved with DIO. Furthermore, DTH‐based devices demonstrated superior photostability. In a ternary blend system (PM6:D18‐Cl:L8‐BO), an efficiency of 19.07% is attained, outperforming previous non‐halogenated solvent additive‐based OSCs. Furthermore, employing a non‐halogenated processing solvent combination of toluene and carbon disulfide, a high PCE of 18.82% is achieved. These results underscore the efficacy of designing solvent additives with aromatic and alkyl units, enabling tailored interactions with the donor and acceptor, thereby presenting a robust strategy for optimizing OSC performance and stability. [ABSTRACT FROM AUTHOR]

Fluorination strategy is demonstrated to be a successful approach for optimizing the electron distribution and morphology of organic photovoltaic materials. The previous works focus on introducing only a few C(sp2)─F bonds into conjugated backbone or C(sp3)─F bonds into sidechains. Herein, a new strategy by introducing C(sp3)─F polyfluoride unit into the backbone is proposed, wherein the fluorine atoms are not involved into the conjugation but can promote the intermolecular interaction between backbones. Two wide‐bandgap fluoropolymers are prepared and employed as the third component for ternary organic solar cells. As expected, even if there are six fluorine atoms in a single repeat unit, the relevant fluoropolymers possess complementary absorption and aligned energy levels. More importantly, the polyfluoride backbone affords adequate non‐covalent interactions, consequently enhancing the polymer aggregation and packing order, which is verified by a fibril‐like morphology in the blend film with the host polymer PM6 and only 10 wt.% fluoropolymer. In addition, the decreased surface energy caused by polyfluoride unit is beneficial for the improvement of domain purity and the formation of nanoscale phase separation between donor and acceptor materials. As a result, the fluoropolymer‐assisted ternary device displays a higher efficiency of 18.74% compared with the binary device (17.39%). [ABSTRACT FROM AUTHOR]

Double‐cable conjugated polymers with near‐infrared (NIR) electron acceptors are synthesized for use in single‐component organic solar cells (SCOSCs). Through the development of a judicious synthetic pathway, the highly sensitive nature of the 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile (IC)‐based electron acceptors in basic and protonic solvents is overcome. In addition, an asymmetric design motif is adopted to optimize the packing of donor and acceptor segments, enhancing charge separation efficiency. As such, the new double‐cable polymers are successfully applied in SCOSCs, providing an efficiency of over 10 % with a broad photo response from 300 to 850 nm and exhibiting excellent thermal/light stability. These results demonstrate the powerful design of NIR‐acceptor‐based double‐cable polymers and will enable SCOSCs to enter a new stage. [ABSTRACT FROM AUTHOR]

We developed a series of highly crystalline double‐cable conjugated polymers for application in single‐component organic solar cells (SCOSCs). These polymers contain conjugated backbones as electron donor and pendant perylene bisimide units (PBIs) as electron acceptor. PBIs are connected to the backbone via alkyl units varying from hexyl (C6H12) to eicosyl (C20H40) as flexible linkers. For double‐cable polymers with short linkers, the PBIs tend to stack in a head‐to‐head fashion, resulting in large d‐spacings (e.g. 64 Å for the polymer P12 with C12H24 linker) along the lamellar stacking direction. When the length of the linker groups is longer than a certain length, the PBIs instead adopt a more ordered packing likely via H‐aggregation, resulting in short d‐spacings (e.g. 50 Å for the polymer P16 with C16H32 linker). This work highlights the importance of linker length on the molecular packing of the acceptor units and the influences on the photovoltaic performance of SCOSCs. [ABSTRACT FROM AUTHOR]

A record power conversion efficiency of 8.40 % was obtained in single‐component organic solar cells (SCOSCs) based on double‐cable conjugated polymers. This is realized based on exciton separation playing the same role as charge transport in SCOSCs. Two double‐cable conjugated polymers were designed with almost identical conjugated backbones and electron‐withdrawing side units, but extra Cl atoms had different positions on the conjugated backbones. When Cl atoms were positioned at the main chains, the polymer formed the twist backbones, enabling better miscibility with the naphthalene diimide side units. This improves the interface contact between conjugated backbones and side units, resulting in efficient conversion of excitons into free charges. These findings reveal the importance of charge generation process in SCOSCs and suggest a strategy to improve this process: controlling miscibility between conjugated backbones and aromatic side units in double‐cable conjugated polymers. [ABSTRACT FROM AUTHOR]

The crystalline cooperativity of the donor and acceptor segment in double‐cable conjugated polymers plays an important role in the nanophase separation and photovoltaic performance in single‐component organic solar cells (SCOSCs). Two double‐cable conjugated polymers with the same conjugated backbone and perylene bisimide (PBI) side units were designed in which PBIs were positioned symmetrically and perpendicularly (P1) and asymmetrically and slantingly (P2) along the conjugated backbones. After thermal annealing, both conjugated backbones and PBI side units in P1 tend to form ordered nanostructures, while PBI side units in P2 dominated the crystallization and hamper the crystallization of conjugated backbones. P1 showed good crystalline cooperativity between conjugated backbones and PBI side units, resulting in improved power conversion efficiencies (PCEs) up to 3.43 % in SCOSCs, while P2 with poor crystalline cooperativity exhibited PCEs below 2.42 %. [ABSTRACT FROM AUTHOR]

A series of conjugated polymers containing benzodithiophene as donor and isoindigo as acceptor with no, one, two and three thiophene spacer groups is synthesized and characterized. The polymer with bithiophene as a spacer has a superior efficiency of 7.31% in solar cells. This demonstrates an important design strategy to produce polymers for high‐performance solar cells by inserting thiophene spacer groups. [ABSTRACT FROM AUTHOR]

Scalable production methods and low-cost materials with low embodied energy are key to success for organic solar cells. PEDOT(PSS) electrodes meet these criteria and allow for low-cost and all solution-processed solar cells. However, such devices are prone to shunting. In this work we introduce a roll-to-roll lamination method to construct semitransparent solar cells with a PEDOT(PSS) anode and an polyethyleneimine (PEI) modified PEDOT(PSS) cathode. We use the polymer:PCBM active layer coated on the electrodes as the lamination adhesive. Our lamination method efficiently eliminates any shunting. Extended exposure to ambient degrades the laminated devices, which manifests in a significantly reduced photocurrent extraction when the device is illuminated through the anode, despite the fact that the PEDOT(PSS) electrodes are optically equivalent. We show that degradation-induced electron traps lead to increased trap-assisted recombination at the anode side of the device. By limiting the exposure time to ambient during production, degradation is significantly reduced. We show that lamination using the active layer as the adhesive can result in device performance equal to that of conventional sequential coating. Printing solar cell: yield enhanced by laminating the active layer The manufacturing yield of the flexible organic solar cells is enhanced with a new lamination method by solving the shunting problem due to conductive inks. A collaborative team led by Olle Inganäs from Linköping University, Sweden fabricates polymer: PCBM all-organic solar cells in ambient conditions using the active layer as the lamination adhesive. The team shows that reduced exposure to ambient is critical to achieve high device efficiency and suppress degradation. The degraded devices generate asymmetric photocurrent due to the electron traps in the active layer. The reported active layer lamination method not only solves the shunting problem in a number of different polymer: PCBM combinations, but also provides wide tenability and control of the composition and vertical phase separation of the active layer. [ABSTRACT FROM AUTHOR]

In this work, we successfully applied a fullerene derivative PC 71 BM as the second acceptor in PM6:BTP-BO-4Cl bulk heterojunction organic solar cell system. The device performance can be remarkably enhanced from 16.65% of the PM6:BTP-BO-4Cl binary system to approaching 17.4% of the ternary system with just low PC 71 BM loading. Detailed investigation revealed that introduction of small amount of PC 71 BM can improve the molecular aggregation and film morphology, thus display better exciton dissociation and charge transport. [Display omitted] In this work, we introduced a fullerene acceptor (PC 71 BM) into the binary photo-active layer based on a polymer donor (PM6) and a non-fullerene small molecular acceptor (BTP-BO-4Cl), and as a consequence, the ternary organic solar cells realized a high-power conversion efficiency of 17.39% compared to 16.65% in binary solar cells. The performance enhancement was found to be due to the optimized morphology and hence balanced hole and electron mobilities, which is responsible for the suppressed charge recombination and hence high photocurrent in solar cells. In addition, PC 71 BM shows the complementary absorption with PM6 and BTP-BO-4Cl, which can broaden the absorption range of the photo-active layer and hence more photons from the sunlight can be utilized. Besides, PC 71 BM shows the cascade energy level alignment between PM6 and BTP-BO-4Cl, which is helpful for charge transfer from donor to acceptor. All these merits explain the high performance in ternary solar cells, and also demonstrate that ternary photovoltaics adopting non-fullerene acceptor with the fullerene acceptor as small amount of additive is an efficient strategy to gain high performing organic solar cells. [ABSTRACT FROM AUTHOR]