Search

We have designed and synthesized two wide bandgap new donor‐acceptor (D‐A) copolymers consisting of the same alkylthiazole‐substituted benzo[1,2‐b;4,5‐b′]dithiophene (BDTTz) donor unit and but different acceptor units, i.e., thiazolo[5,4‐d]thiazole (TTZ) (P122) and 1,3,‐4 thiadiazole (TDz) (P123) and investigated their optical and electrochemical properties. We have employed these copolymers as donor and fullerene (PC71BM) and narrow bandgap non‐fullerene (Y6) as acceptor, to fabricate binary and ternary bulk heterojunction polymer solar cells (PSCs). The overall power conversion efficiency (PCE) of optimized binary bulk heterojunction PSCs based on P122:Y6 and P123:Y6 is 12.60% and 13.16%, respectively. The higher PCE for PSCs based on P123 than P122 counterparts may be associated with the broader absorption profile of the P123 and more charge carrier mobilities than that for the P122 active layer. With the incorporation of small amount of PC71BM into either P122:Y6 or P123:Y6 binary blend, the corresponding ternary PSCs showed an overall PCE of 14.89% and 15.52%, respectively, which is higher than the binary counterparts using either Y6 or PC71BM as acceptor. Incorporating the PC71BM in the binary host blend increases the absorption in the 300–500 nm wavelength region, generating more excitons in the active ternary layer and helping to dissociate the excitons into free charge carriers more effectively. The more appropriate nanoscale phase separation in the active ternary layer than the binary counterpart may be one of the reasons for higher PCE. [ABSTRACT FROM AUTHOR]

Two D‐A copolymers consisting of fused ring pyrrolo‐dithieno‐quinoxaline acceptors are synthesized with different donor units, i.e., benzodithiophene (BDT) with alkylthienyl (P134) and 2‐ethylhexyloxy (P117) side chains. These copolymers are used as donors and a narrow bandgap acceptor Y6 to fabricate bulk heterojunction polymer solar cell devices. Owing to the strong electron‐deficient fused ring pyrrolo‐bithieno‐quinoxaline and weak alkyl thienyl side chains in BDT, the polymer solar cells (PSCs) based on P134:Y6 attain the power conversion efficiency (PCE) of 15.42%, which is higher than the P117:Y6 counterpart (12.14%). The superior value of PCE for P134:Y6 can be associated with more well‐adjusted charge transport, weak charge recombination, proficient exciton generation, and dissociation into free charge carriers and their subsequent charge collection owing to the dense π–π stacking distance and more considerable crystal coherence length for the P134:Y6 thin films. This investigation confirms the great potential of a strong acceptor‐weak donor tactic for developing efficient D‐A copolymers consists of quinoxaline acceptor for PSCs. [ABSTRACT FROM AUTHOR]

A new acceptor unit anthra[1,2‐b: 4,3‐b': 6,7‐c'']trithiophene‐8,12‐dione (А3Т) (A2) is synthesized and used to design D‐A1‐D‐A2 medium bandgap donor copolymers with same thiophene (D) and A2 units but different A1, i.e., fluorinated benzothiadiazole (F‐BTz) and benzothiadiazole (BTz) denoted as P130 and P131, respectively. Their detailed optical and electrochemical properties are examined. The copolymers show good solubility in common organic solvents, broad absorption in the visible spectral region from 300 to 700 nm, and deeper HOMO levels of −5.45 and −5.34 eV for P130 and P131, respectively. Finally, an optimized polymer solar cell (PSC) based on P131 as the donor and narrow bandgap non‐fullerene small molecule acceptor Y6 demonstrated a power conversion efficiency (PCE) of >11.13%. To further improve the efficiency of the non‐fullerene PSC, the P130 is optimized by introducing a fluorine atom into the BTz unit, F‐BTz acceptor unit, and PCE PSC based on P130: Y6 active layer increased to >15.28%, which is higher than that for the non‐fluorinated analog P131:Y6. The increase in the PCE for former PSC is attributed to the more crystalline nature and compact π–π stacking distance, leading to more balanced charge transport and reduced charge recombination. These remarkable results demonstrate that A3T‐based copolymer P130 with F‐BTz as the second acceptor is a promising donor material for high‐performance PSCs. [ABSTRACT FROM AUTHOR]

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from −5.23 to −5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC71BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485 [ABSTRACT FROM AUTHOR]

A cross-linkable conjugated polymer with bromo groups on the side chain has been developed and used as an anode interlayer to improve the active layer morphology and consequently enhance the device performance of polymer solar cells (PSCs). The polymer, PCDTBT-Br, has cross-linkable bromo groups attached to the side chain of a widely-used donor polymer, poly[N-9-heptadecanyl-2,7-carbazole- alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (PCDTBT). The pendant bromo groups do not significantly change the LUMO/HOMO energy levels and absorption spectrum of the PCDTBT polymer backbone. PDCTBT-Br can crosslink under UV irradiation to give a robust film, which enables multilayer PSC device fabrication. Moreover, the much lower surface energy of PCDTBT-Br (20.4 mJ m−2) compared to PEDOT:PSS (91.6 mJ m−2) is beneficial for achieving optimal active layer morphology. As a result, with PCDTBT:[6,6]-phenyl-C71 butyric acid methyl ester (PC71BM) as the active layer, the PSC device with PCDTBT-Br as the underlying layer shows a power conversion efficiency (PCE) of 6.59 %, in comparison to a PCE of 5.86 % of the control device. The device performance enhancement is ascribed to the much improved phase separation with a fibrillar nanostructure in the active layer. [ABSTRACT FROM AUTHOR]

We demonstrate that polymer electron acceptors with excellent all-polymer solar-cell (all-PSC) device performance can be developed from polymer electron donors by using B←N units. By alleviating the steric hindrance effect of the bulky pendant moieties on the conjugated polymers that contain B←N units, the π-π stacking distance of polymer backbones is decreased and the electron mobility is consequently enhanced by nearly two orders of magnitude. As a result, the power conversion efficiency of all-PSCs with the polymer acting as the electron acceptor is greatly improved from 0.12 % to 5.04 %. This PCE value is comparable to that of the best all-PSCs with state-of-the-art polymer acceptors. [ABSTRACT FROM AUTHOR]

A double B←N bridged bipyridyl (BNBP) is a novel electron-deficient building block for polymer electron acceptors in all-polymer solar cells. The B←N bridging units endow BNBP with fixed planar configuration and low-lying LUMO/HOMO energy levels. As a result, the polymer based on BNBP units (P-BNBP-T) exhibits high electron mobility, low-lying LUMO/HOMO energy levels, and strong absorbance in the visible region, which is desirable for polymer electron acceptors. Preliminary all-polymer solar cell (all-PSC) devices with P-BNBP-T as the electron acceptor and PTB7 as the electron donor exhibit a power conversion efficiency (PCE) of 3.38 %, which is among the highest values of all-PSCs with PTB7 as the electron donor. [ABSTRACT FROM AUTHOR]

Abstract: New random poly{benzo[1,2-b:4,5-b'']dithiophene-thieno[3,4-c]pyrrole-4,6-dione-pyrrolo[3,4-c]pyrrole-1,4-dione} (PBDT-TPD-DPP) based on benzo[1,2-b:4,5-b'']dithiophene (BDT) as donor and thieno[3,4-c]pyrrole-4,6-dione (TPD, 60–90%), pyrrolo[3,4-c]pyrrole-1,4-dione (DPP, 10–40%) as acceptors were synthesized through Stille coupling reaction. The photophysical, electrochemical and photovoltaic properties of random polymers were investigated. The random polymers with high molecular weight (M n = 33.5–41.7 kDa) exhibited broad and strong absorption covering the spectra range from 350 nm up to 922 nm with absorption maxima at around 700 nm, the relatively deep highest occupied molecular orbital (HOMO) energy levels vary between −5.25 and −5.42 eV and suitable lowest unoccupied molecular orbital (LUMO) energy levels ranging from −3.85 to −3.91 eV. Polymer solar cells (PSC) based on these new random polymers were fabricated with device structures of ITO/PEDOT: PSS/random polymers: PC71BM (1:2, w/w)/Ca/Al. The photovoltaic properties of random polymers were evaluated under AM 1.5G illumination (100 mW/cm2). Devices based on the random polymers showed open circuit voltage (V oc) of 0.71–0.83 V, and power conversion efficiency (PCE) of 0.82–1.80%. [Copyright &y& Elsevier]

Abstract: Enhanced performances of hybrid polymer solar cells based on a blend of poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and p-methoxybenzoic acid (MBA) modified zinc oxide (ZnO) nanoparticles were reported. Both the short-circuit current and open-circuit voltage of solar cells were improved by using MBA modified ZnO nanoparticles as electron acceptor. The overall power conversion efficiency was increased from 1.09% to 1.52% under AM 1.5G 100mW/cm2 illumination after ZnO was modified with MBA at 0.1wt.%. It was found that modification of ZnO with 0.1wt.% of MBA did not affect electron and hole transport properties of the active layer. However, a fine phase separation between MEH-PPV donor and MBA-modified ZnO acceptor was obtained. The fine phase separation enhanced the exciton dissociation efficiency and hence the power conversion efficiency of solar cells. [Copyright &y& Elsevier]