Search

Mechanically strong supramolecular hydrogels (up to 98.9% water content) were obtained by the combination of a rigid, fully π-conjugated polymer backbone and zwitterionic side chains. The gels were characterized by SAXS, SEM and rheology measurements and are fluorescent, stimuli responsive (temperature, salts) and bind DNA.

The intricacy of the different parameters involved in cell adhesion to biomaterials and fate decision (e.g. proliferation, differentiation, apoptosis) makes the decoupling of the respective effects of surface properties, extra-cellular matrix protein adsorption and ultimately cell behaviour difficult. This work presents a micro-patterned polymer brush platform to control the adsorption of extra-cellular matrix (ECM) proteins to well defined micron-size areas and consequently control cell adhesion, spreading and shape independently of other chemical and physical surface properties. Protein patterns can be readily generated with brushes presenting a range of hydrophilicity and surface charge density. The surface properties of the selected brushes are fully characterised using a combination of FTIR, XPS, ellipsometry, atomic force microscopy, water contact goniometry, dynamic light scattering and ζ-potential measurements. Interactions of proteins relevant to cell patterning and culture with these brushes are studied by surface plasmon resonance, dynamic light scattering, ellipsometry and immuno-fluorescence microscopy. Finally this platform is used in an assay investigating the relative contributions of matrix geometry and surface chemistry on epidermal stem cell differentiation. It is found that moderate hydrophobicity does not impact stem cell commitment, whereas strongly negative surface potential increases the incidence of differentiation. This correlates with a marked decrease in the formation of focal adhesions (but not cell spreading).

Nonspecific protein adsorption is a central challenge for the use of polymeric materials in biological media. While the quantity of adsorbed protein can be lowered, very few surfaces are protein resistant when exposed to undiluted serum or plasma. The underlying principles of this fouling and the adsorbing proteins remain to be identified. Here, we investigated adsorption from undiluted human blood plasma to three different polymer brushes. Our study showed that the polymer structure does not influence which proteins adsorb. Further, we identified 98 plasma proteins that still foul current "protein-resistant" polymer brushes. Detailed studies into the major adsorbing protein revealed the central role that lipoproteins and low density lipoprotein in particular play in fouling of plasma to polymeric biomaterials. However, although apolipoprotein B100 is found as a major fouling protein in our mass spectrometry screening, studies on individual components of lipoproteins show that it is not apoB100 but a mixture of phospholipids, triglycerides, and cholesteryl esters that plays a major role in lipoprotein adsorption.

We present a fast and efficient in situ synthetic approach to obtain fully π-conjugated polymers with degrees of polymerization up to 23 and near quantitative (>95%) heterobis-functionalization. The synthesis relies on the key advantages of controlled Suzuki chain-growth polymerization: control over molecular weight, narrow polydispersity, and ability to define polymer end groups. The first end group is introduced through the initiator metal complex tBu(3)PPd(X)Br, while the second end group is added by quenching of the chain-growth polymerization with the desired boronic esters. In all cases, polymers obtained at 50% conversion showed excellent end group fidelity and high purity following a simple workup procedure, as determined by MALDI-TOF, GPC, and (1)H and 2D NMR. End group functionalization altered the optoelectronic properties of the bridge polymer. Building on a common fluorene backbone, and guided by DFT calculations, we introduced donor and acceptor end groups to create polymeric molecular wires exhibiting charge transfer and energy transfer as characterized by fluorescence, absorption, and transient absorption spectroscopy as well as by fluorescence lifetime measurements.

Microgel particles are formed from aqueous-two-phase-system (ATPS) droplets in poly(dimethylsiloxane) (PDMS) microfluidic devices. The droplets consist of a dextran core and a photopolymerizable poly(ethylene glycol) diacrylate (PEGDA) shell. Upon UV exposure, the ATPS droplets undergo a shape-transformation yielding PEGDA microgel particles containing a socket., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this paper, we demonstrate a double nanoimprinting process that allows the formation of nanostructured polymer heterojunctions of composition and morphology that can be selected independently. We fabricated photovoltaic (PV) devices with extremely high densities (10(14)/mm(2)) of interpenetrating nanoscale columnar features in the active polymer blend layer. The smallest feature sizes are as small as 25 nm on a 50 nm pitch, which results in a spacing of heterojunctions at or below the exciton diffusion length. Photovoltaic devices based on double-imprinted poly((9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(3-hexylthien-5-yl)-2,1,3-benzothiadiazole]-2',2''-diyl) (F8TBT)/ poly(3-hexylthiophene) (P3HT) films are among the best polymer-polymer blend devices reported to date with a power conversion efficiency (PCE, eta(e)) of 1.9%.

Soft nanotechnology involves both understanding the behavior of soft matter and using these components to build useful nanoscale structures and devices. However, molecular scale properties such as Brownian motion, diffusion, surface forces, and conformational flexibility dominate the chemistry and physics in soft nanotechnology, and therefore the design rules for generating functional structures from soft, self-assembled materials are still developing. Biological motors illustrate how wet nanoscale machines differ from their macroscopic counterparts. These molecular machines convert chemical energy into mechanical motion through an isothermal process: chemical reactions generate chemical potential and diffusion of ions, leading to conformational changes in proteins and the production of mechanical force. Because the actuation steps form a thermodynamic cycle that is reversible, the application of mechanical forces can also generate a chemical potential. This reverse process of mechanotransduction is the underlying sensing and signaling mechanism for a wide range of physiological phenomena such as hearing, touch, and growth of bone. Many of the biological systems that respond to mechanical stimuli do this via complex stress-activated ion channels or remodeling of the actin cytoskeleton. These biological actuation and mechanosensing processes are rather different from nano- and microelectromechanical systems (NEMS and MEMS) produced via semiconductor fabrication technologies. In our group, we are working to emulate biological mechanotransduction by systematically developing building blocks based on polymer brushes. In this soft nanotechnology approach to mechanotransduction, the chemical building blocks are polymer chains whose conformational changes and actuation can be investigated at a very basic level in polymer brushes, particularly polyelectrolyte brushes. Because these polymer brushes are easily accessible synthetically with control over parameters such as composition, chain length, and chain density, brushes provide a robust platform to study the coupling of mechanical forces with conformational changes of the chains. This Account provides an overview of our recent research in the design of mechanosensitive polymer brushes starting with the demonstration of nanoactuators and leading to our first attempts toward the creation of artificial mechanotransduction elements. As the brushes collapse in response to external triggers such as pH and ion concentration, polyelectrolyte brushes provide stimuli-responsive films. These collapse transitions lead to the generation of mechanical forces, and by reversing the chain of events, we designed a mechanically responsive film with a chemical output. Having reported an initial proof-of-principle experiment, we think that the stage is set for the preparation of more elaborate mechanosensitive surfaces.

Responsive polymer materials can adapt to surrounding environments, regulate transport of ions and molecules, change wettability and adhesion of different species on external stimuli, or convert chemical and biochemical signals into optical, electrical, thermal and mechanical signals, and vice versa. These materials are playing an increasingly important part in a diverse range of applications, such as drug delivery, diagnostics, tissue engineering and 'smart' optical systems, as well as biosensors, microelectromechanical systems, coatings and textiles. We review recent advances and challenges in the developments towards applications of stimuli-responsive polymeric materials that are self-assembled from nanostructured building blocks. We also provide a critical outline of emerging developments.

Poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes are extremely protein resistant polymer coatings that can reduce nonspecific adsorption of proteins from complex mixtures such as blood, sera and plasma. These coatings can be prepared via atom transfer radical polymerization with excellent control of their thickness and grafting density. We studied their direct functionalization with streptavidin and developed an assay for determining which coupling conditions afford the highest streptavidin loading efficiency. Disuccinimidyl carbonate was found to be the most efficient activating agent for covalent capture of the receptor. Using infrared and X-ray photoelectron spectroscopy, fluorescence microscopy, surface plasmon resonance, and ellipsometry, we examined how structural parameters such as the length of the oligo(ethylene glycol) side chain affect streptavidin functionalization, but also immobilization of biotinylated antibodies, subsequent selective secondary recognition and nonspecific binding of proteins. We found evidence that large macromolecules cannot infiltrate dense polymer brushes and that bulky antibody recognition occurs in the upper part of these coatings.

This study investigates the antibacterial and cytotoxic effect of surfaces with sulphonate brushes containing silver salts. By using the same type of samples for both cytotoxicity and antibacterial studies, these two parameters could be compared in a controlled way. The silver was incorporated into the brush in four different forms to enable release of silver ions at different concentrations and different rates. It was found that although the surfaces displayed very good antibacterial properties in buffer solutions, this effect disappeared in systems with high protein content. Similarly, the silver-containing surfaces displayed cytotoxic effects in the absence of serum proteins but this effect was reduced in the presence of serum. The speciation of silver in the different solutions is discussed. Cytotoxic and antibacterial effects are compared at the different silver concentrations released. The implications of a concentration range where silver could be used to kill bacterial without harmful effects on mammalian cells are also discussed and questioned.

The conformational behavior of poly[2-(methacryloyloxy)ethyltrimethylammonium chloride] (PMETAC) brushes with different chain density in the presence of large benzyltributylammonium chloride (BTBAC) ions has been studied by a Quartz Crystal Microbalance with Dissipation (QCM-D) and Scanning Force Microscopy. Dense brushes do not collapse in the presence of BTBAC solutions of increasing ionic strength, contrary to what is observed in the presence of NaCl. Brush collapse can be observed for low-ionic-strength solutions of BTBAC when the brush density has been reduced. These phenomena can be explained by considering the Hofmeister series as well as ion size and free space in the brush.

We demonstrate the uniaxial alignment of a liquid-crystalline conjugated polymer, poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) by means of nanoconfinement during nanoimprinting. The orientation of the conjugated backbones was parallel to the nanolines imprinted into the polymer film. Polarized UV-vis absorption and photoluminescence spectra were measured to quantify the degree of alignment, showing that the polarization ratio and uniaxial molecular order parameter were as high as 66 and 0.97, respectively. The aligned F8BT film was used as the active layer in a PLED, which resulted in polarized electroluminescence with a polarization ratio of 11. Ambipolar PFET in a top-gate configuration with aligned F8BT as the active semiconducting layer showed mobility enhancement when the chains were aligned parallel to the transport direction. Mobility anisotropies for hole and electron transport were 10-15 and 5-7, respectively, for current flow parallel and perpendicular to the alignment direction.

This article describes the aqueous atom transfer radical polymerization synthesis of poly(3-sulfopropylmethacrylate) brushes onto gold and Si/SiO2 surfaces in a controlled manner. The effect of Cu(I)/Cu(II) ratio was examined, and a quartz crystal microbalance was used to study the kinetics of the brush synthesis. The synthesized brushes displayed a thickness from a few nanometers to several hundred nanometers and were characterized using atomic force microscopy, ellipsometry, Fourier transform infrared spectroscopy (FTIR), contact angle measurements, and X-ray photoelectron spectroscopy (XPS). The as-synthesized sulfonate brushes had very good ion-exchange properties for the ions tested in this study, i.e., Na+, K+, Cu2+, and Ag+. FTIR and XPS show that the metal ions are coordinating to sulfonate moieties inside the brushes. The brushes were easily loaded with silver ions, and the effect of silver ion concentration on silver loading of the brush was examined. The silver-loaded brushes were shown to be antibacterial toward both gram negative and gram positive bacteria. The silver leaching was studied through leaching experiments into water, NaNO3, and NaCl (physiological medium). The results from these leaching experiments are compared and discussed in the article.

Polymer brushes are assemblies of macromolecules chemically tethered at one end to a substrate. They provide an alternative to self-assembled monolayers because of the intrinsically large size of the building blocks and the ensuing entropic contribution to the film morphology. In this article, an overview of a number of representative polymer brush systems will be presented and their potential application for surfaces with controlled wettability, smart surfaces and nanoactuators will be explored in some detail.

Samples of polymeric materials generally have no intrinsic shape; rather their macroscopic form is determined by external forces such as surface tension and memory of shear (for example, during extrusion, moulding or embossing). Hence, in the molten state, the thermodynamically most stable form for polymer (nano)particles is spherical. Here, we present the first example of polymer nanoparticles that have an intrinsic non-spherical shape. We observe the formation of high-aspect-ratio ellipsoidal polymer nanoparticles, of controlled diameter, made from main-chain liquid crystalline polymers using a mini-emulsion technique. The ellipsoidal shape is shown to be an equilibrium (reversible) characteristic and a direct result of the material shape memory when a liquid crystal nanoparticle is in its monodomain form.

The manufacture of high-performance electronic devices with micrometre or even submicrometre dimensions by solution processing and direct printing, requires the ability to control accurately the flow and spread of functional liquid inks on surfaces. This can be achieved with the help of surface-energy patterns causing inks to be repelled and dewetted from pre-defined regions of the substrate. To exploit this principle for the fabrication of submicrometre device structures, a detailed understanding of the factors causing ink droplets to dewet on patterned surfaces is required. Here, we use hydrophobic surface-energy barriers of different geometries to study the influence of solution viscosity, ink volume, and contact angle on the process of dewetting of inkjet-printed droplets of a water-based conducting polymer. We demonstrate polymer field-effect transistor devices with channel length of 500 nm fabricated by surface-energy-assisted inkjet printing.

Polymer brushes produced by controlled surface-initiated polymerization provide a route to surfaces coated with well-defined thin polymer films that are covalently bound to the substrate. All of the major controlled polymerization techniques have been applied to the synthesis of polymer brushes and examples of each are presented here. Many examples of brush synthesis in the literature have used the living atom transfer radical polymerization (ATRP) system, and in this tutorial review a particular focus is given to examples of this technique.