Search

Protein-coated polymer-based microparticles are attractive supports for cell delivery, but the interplay between microparticle properties, protein coating, and cell response is poorly understood. The interest in alternative microparticle formulations increases the need for a better understanding of how functional protein coatings form on different microparticles. In this work, microparticle formulations based on biodegradable polymers [poly (lactic-co-glycolic acid) (PLGA) and the triblock copolymer PLGA-poloxamer-PLGA] were prepared via an emulsion-based process. To explore the impact that the use of a surfactant has on the properties of the microparticles, the emulsion was stabilized by using either a surfactant, poly(vinyl alcohol), or an organic solvent, propylene glycol. Four different types of microparticles were prepared through combinations of the two types of polymers and the two types of stabilizers. The coating of microparticles with proteins/polypeptides such as fibronectin and poly-d-lysine has been demonstrated before and is an integral step for their application as microcarriers, e.g., for cell delivery; however, the impact of the microparticles' surface chemical properties on the formation (prevalence and distribution) of the mixed polypeptide coatings and the influence on subsequent cell attachment remain to be elucidated. Using a colocalization analysis approach on ToF-SIMS images of protein-coated microparticles, we show that the use of propyleneglycol over PVA as well as the substitution of PLGA by the triblock copolymer resulted in enhanced protein adsorption. Furthermore, if propyleneglycol is used, the substitution of PLGA with the triblock copolymer leads to increased stem cell adhesion.

The use of cell sheets for tissue engineering applications has considerable advantages over single cell seeding techniques. So far, only thermoresponsive surfaces have been used to manufacture cell sheets without chemically disrupting the cell-surface interactions. Here, we present a new and facile technique to prepare sheets of epithelial cells using plasma polymerised acrylic acid films. The cell sheets are harvested by gentle agitation of the media without the need of any additional external stimulus. We demonstrate that the plasma polymer deposition conditions affect the viability and metabolic activity of the cells in the sheet and relate these effects to the different surface properties of the plasma polymerised acrylic acid films. Based on surface analysis data, a first attempt is made to explain the mechanism behind the cell sheet formation. The advantage of the epithelial cell sheets generated here over single cell suspensions to seed a PLGA scaffold is presented. The scaffold itself, prepared using a mould fabricated via photolithography, exhibits a unique architecture that mimics closely the dimensions of the native tissue (mouse intestine)., (Copyright 2010 Elsevier Ltd. All rights reserved.)

To investigate the behavior of plasma polymers in biomaterial applications, we studied plasma polymerized hexane (ppHex) and plasma polymerized allylamine (ppAAm) in pure, buffered, and protein containing aqueous solutions. We report for the first time on nanoscale pores formed on ppHex deposits upon exposure to water and surface blistering of ppHex deposited on ppAAm in water. We demonstrate that the nature of the solution influenced the feature formation. These studies are necessary to monitor the changes of the plasma polymer surfaces applied in cell guidance. The surface chemical and topographical data from single- and double-layer plasma polymer films were compared. We further demonstrate that the differences in surface chemistry and topography that develop during aqueous exposure between the single- and double-layer plasma polymer deposits do not affect the adhesion of cells to the surface. These novel nanostructured surfaces may prove useful as membranes or structured films in biotechnological applications.

Plasma species that form plasma polymer deposits readily penetrate through small openings and are therefore well suited to coat the interior of porous objects. Here, we show how the size of the cross section of square channels influences the penetration of active species from a hexane plasma and how it affects the formation of surface chemical gradients in the interior of these model pores. WCA mapping and ToF-SIMS imaging are used to visualize the plasma polymer deposit in the interior of the model pores and demonstrate that a strong dependence of the wettability gradient profile only exists up to a channel cross section of about 1 mm. XPS data allow us to calculate a deposition rate of plasma polymerized hexane (ppHex) at discrete positions on the surface and show that the deposition rate of ppHex is reduced by the presence of the mask up to a distance of 16 mm in advance of the channel opening. A strong dependence of the ppHex deposition rate on the cross-section of the channels is found within the first 2 mm in front of the pore opening. An estimation of the sheath thickness suggests that this effect can be attributed to the plasma sheath that perturbs the plasma in front of the pores. Plasma mass spectrometry allows us to identify the nature of the plasma species penetrating from the plasma through the pores and shows that no negatively charged ions are able to penetrate through the small channels. Neutral and positively charged species penetrate several millimeters down the channels and both species are therefore likely to contribute to the formation of the deposit on the sample. In addition, the formation of positively charged higher molecular mass hexane fragments is observed in the gas phase, demonstrating the likelihood of neutral-positive reactions in the plasma.

This paper reports on the application of surface chemical gradients to study mammalian cell interactions with synthetic surfaces and investigates if the cell response on certain parts of the gradient is the same as that on uniform surfaces of equivalent chemistry. The gradients, formed using a diffusion-controlled plasma polymerisation technique, were fabricated such that cell response to a large range of different chemistries on a single sample could be investigated. Surface chemical gradients from hydrophobic plasma polymerised hexane (ppHex) to a more hydrophilic plasma polymerised allylamine (ppAAm), previously used to control cell density within 3D tissue-engineering scaffolds, were formed on glass coverslips. Surface characterisation was carried out to determine water contact angles (WCA), elemental composition, coating thickness and topography of the chemical gradients. Cell response was assessed following culture of 3T3 fibroblasts on both steep and shallow gradients. Fibroblasts adhered and proliferated preferentially on ppAAm (WCA approximately 60 degrees ) showing a gradual decreasing cell density towards the hydrophobic ppHex (WCA approximately 93 degrees ). Experiments on a uniform ppAAm surface revealed that there was a significant difference in cell density when compared to the gradient samples. The initial number of cells that adhered to the surface was confirmed as the difference between the uniform and graduated ppAAm samples, and it is assumed that this difference relates to different cell-cell signalling processes and/or greater protein production from surrounding cells on these two samples formats.

Water contact angle measurement is the most common method for determining a material's wettability, and the sessile drop approach is the most frequently used. However, the method is generally limited to macroscopic measurements because the base diameter of the droplet is usually greater than 1 mm. Here we report for the first time on a dosing system to dispense smaller individual droplets with control of the position and investigate whether water contact angles determined from picoliter volume water droplets are comparable with those obtained from the conventional microliter volume water droplets. This investigation was conducted on a group of commonly used polymers. To demonstrate the higher spatial resolution of wettability that can be achieved using picoliter volume water droplets, the wettability of a radial plasma polymer gradient was mapped using a 250 microm interval grid.