Search

Polymer nanoparticles are prepared by self-assembly of visible light and pH sensitive perylene-functionalized copolymers which are synthesized by quaternization between 1-(bromomethyl)perylene and the dimethylaminoethyl units of poly(dimethylaminoethyl methacrylate) (PDMAEMA). The perylene-containing polymethacrylate segments afford the system visible light responsiveness and the unquaternized PDMAEMA segments afford the system pH responsiveness. The self-assembled nanoparticles exhibit a unique dual stimuli response. They can be photocleaved under visible light irradiation, shrunken to smaller nanoparticles at high pH, and swollen at low pH. The structural change endows the nanoparticle with great potential as a sensitive nanocarrier for controlled release of Nile Red and lysozyme under this stimulation. The visible light responsiveness and synergistic effect on the release of loaded molecules with the dual stimulation may obviate the need for harsh conditions such as UV light or extreme pH stimulation, rendering the system more applicable under mild conditions., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A series of novel transparent shape memory co-polymers, made from (meth)acrylate monomers, intended to be used as intraocular lens, was synthesized. The thermo-mechanical properties, shape memory properties and optical properties of the co-polymers could be adjusted by using monomers with various alkyl chain lengths. The cytocompatibility of the prepared co-polymers to L929 mouse connective tissue fibroblasts was demonstrated in vitro, and the co-polymers exhibited favorable cytocompatibility, supporting cell viability and proliferation. This study showed that the prepared co-polymers, which exhibited good flexibility, adjustable shape memory properties, high transparency and favorable cytocompatibility, could find great promising applications as intraocular lens.

The unique features of shape-memory polymers enables their use in minimally invasive surgical procedures with a compact starting material switching over to a voluminous structure in vivo. In this work, a series of transparent, thermoset (meth)acrylate shape-memory polymer networks with tailored thermomechanics have been synthesized and evaluated. Fundamental trends were established for the effect of the crosslinker content and crosslinker molecular weight on glass transition temperature, rubbery modulus and shape-recovery behavior, and the results are intended to help with future shape-memory device design. The prepared (meth)acrylate networks with high transparency and favorable biocompatibility are presented as a promising shape-memory ophthalmic biomaterial.

Acrylates have been used in ophthalmic practice as a paradigmatic implant material for decades, especially as intraocular lens for their excellent transparency. A novel polymeric shape memory system of chemically cross-linked acrylate-methacrylate copolymer networks was developed and characterized in this study. The thermomechanical properties, shape memory properties, transparency, and surface wettability as well as cytotoxicity were systematically evaluated to mimic the in vivo situation by differential scanning calorimetry (DSC), tensile tests, spectrophotometer, Abbe refractometer, contact angle measurements, and MTT assay. It was found that the chemically cross-linked copolymer network behaves as an elastomer capable of arbitrary shaping above the glass-transition temperature. Transition temperatures of the networks were tunable through the change of the composition of monomers.

Injectable acrylamide/N-vinylpyrrolidinone copolymers with pendent thiol groups were prepared by a radical polymerization and reductive dissolution reaction. The solution of copolymers was re-gelled through oxidation in air or the thiol-disulfide exchange reaction. The re-gelation time could be adjusted from several minutes to several hours by changing the amount of the disulfide exchange reagent. The re-gelled hydrogels possessed high transmittance in the visible region but could block out some of the ultraviolet radiation. Their refractive indexes ranged from 1.34 to 1.35, and their equilibrium water contents were over 95.0%. The morphologies of the hydrogels were analyzed and the porous structure, with pore sizes of 50-300 microm, was noted. The cytotoxicities of the hydrogels were clearly reduced compared with previous results. The experimental results indicated that the injectable copolymers could be used as an artificial vitreous substance or as a scaffold for lens regeneration.

The reactive thermal-sensitive hydrogels, which combined the reversible thermosensitive and mild reactive property, were designed based on thiol-ene reaction in physiological conditions between thiol and acrylate capped thermosensitive Poloxamer 188. The modified P188A, P188SH, and their reactivity were characterized by (1)H NMR, FT-IR, GPC, DSC, Ellman method, and Rheometer. It was found that the thiol-ene reaction was pH and thermal-sensitive. There was 77.7% SH involved into the reaction at 37.0 degrees C and pH 7.4 within the first 30 min. The most of molecules reacted as CC/SH mol ratio was 1.5. The exothermic thiol-ene reaction was mild, with about DeltaH = -91.18 J/g changes. The multiblocks or network structure limited the dissolution of hydrogel, correspondingly the gel's duration and the release time of methylene blue were prolonged to 124 h. The experimental results indicated the reactive thermal-sensitive hydrogel's potential applications in drug delivery, tissue engineering, and cell encapsulation.

To study polymer-dispersed liquid crystal (PDLC) films doped with indium tin oxide (ITO) nanoparticles (NPs), samples were prepared by ultraviolet-initiated polymerisation based on the thiol-acrylate system. Owing to the interaction between PDLC system and ITO NPs, the content and the size of ITO NPs are the main determinants to the microstructure which plays an essential role on the electro-optical and anti-infrared properties of the PDLC films. In the polymer matrix, a novel microstructure consisting of a dense surface, micron-sized meshes and submicron meshes is found to benefit the better performances of the low driven voltage (20.7 V), the relatively high contrast ratio (8.3) and the lowest transmittance(500-2500 nm) on average at about 3.55% with maximum of merely 7.6%. Thus, it lays a solid foundation for the further investigations on the microstructure and the performance of the PDLC films. Meanwhile, it is proved that the PDLC film, improved performance through doping ITO NPs, is promising to be a superior choice in the field of energy-saving. [ABSTRACT FROM AUTHOR]

To improve the efficacy of anti-inflammatory factors in patients who undergo cataract surgery, poly(2-hydroxyethyl methacrylate-co-methyl methacrylate) (p(HEMA-co-MMA)) hydrogels containing β-cyclodextrin (β-CD) (pHEMA/MMA/β-CD) were designed and prepared as intraocular lens (IOLs) biomaterials that could be loaded with and achieve the sustained release of dexamethasone. A series of pHEMA/MMA/β-CD copolymers containing different ratios of β-CD (range, 2.77 to 10.24 wt.%) were obtained using thermal polymerization. The polymers had high transmittance at visible wavelengths and good biocompatibility with mouse connective tissue fibroblasts. Drug loading and release studies demonstrated that introducing β-CD into hydrogels increased loading efficiency and achieved the sustained release of the drug. Administering β-CD via hydrogels increased the equilibrium swelling ratio, elastic modulus and tensile strength. In addition, β-CD increased the hydrophilicity of the hydrogels, resulting in a lower water contact angle and higher cellular adhesion to the hydrogels. In summary, pHEMA/MMA/β-CD hydrogels show great potential as IOL biomaterials that are capable of maintaining the sustained release of anti-inflammatory drugs after cataract surgery. [ABSTRACT FROM AUTHOR]

Normal-mode polymer stabilised cholesteric liquid crystal (Ch-LC)/aerosil particles (APs) composites are prepared by photo-polymerisation of the photo-polymerisable monomer in the electrically induced homeotropically oriented cholesteric phase of a photo-polymerisable monomer/Ch-LC/APs mixture. On the application of an electric field, the composites can change from a light scattering state to a transparent state accompanied by the texture changing from a focal conic texture to an electrically induced homeotropic texture. Moreover, the process was greatly influenced by the addition of the APs. The focus of this study is on the effects of the APs on the electro-optical performance and the morphology of polymer network of the composites. The effect of the chiral dopant concentration on the electro-optical performance is also studied. [ABSTRACT FROM AUTHOR]

In this study, a series of achiral monomers and chiral monomers of different flexible spacer chains based on cholesteryl moiety were synthesized. Polymer stabilized cholesteric liquid crystal (PSCLC) cells were then created by incorporation of the polymer networks. The influence of the nature of the monomers and the spacer length of chiral monomers on the reflectance properties of PSCLC was investigated as well as the polymerization condition. The results strongly suggest that the chirality of the polymer networks plays an integral role in the observed reflection spectra, and the chiral polymer networks with chiral centers separated well from the polymer backbone induce a greater change in the bulk helix pitch, and produce the broader reflection band in these LC composites. In addition, the temperature dependence of the pitch of the composites before and after polymerization was investigated. To broaden the reflection band further, the experimental processes of thermally induced pitch variation simultaneously with a UV crosslinking reaction of the composites were presented. The morphology of the polymer network in the composites was studied by scanning electron microscopy (SEM). Copyright © 2008 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]