Search

Cellulose fibers(CFs)-based electrode materials are of considerable interest for future wearable electronic devices due to excellent flexibility and strength, and hydrophilicity. The effective introduction of electrode materials into CFs is essential for flexible supercapaciotors(SCs). A tunable electrochemical performance of conductive polymers for poly(3,4-ethylenedioxythiophene)(PEDOT) has been aroused great interests. Herein, we design its electrochemical process via sodium anthraquinone-2-sulfonate(AQS) as dopant and electrolyte additive to construct active electrode interior and interface. As a result, the PEDOT@CFs electrode exhibits great increase of doping level from 0.16 to 0.29, conductivity from 353.46 to 626.15 S m -1 , and specific capacitance from 140.22 to 1211.57 F g -1 at a current density of 0.2 A g -1 . Furthermore, the PEDOT:AQS@CFs electrode possess excellent cyclic stability (96.01 %) after 1000 cycles. The work reveals the mechanism of AQS as dopant and electrolyte additive, and provides a new perspective for application of PEDOT in energy storage field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The success of polymerase chain reaction (PCR) depends on the quality of deoxyribonucleic acid (DNA) templates. This study developed a cost-effective and eco-friendly DNA extraction system utilizing poly(3,4-dihydroxyphenylalanine)-modified cellulose paper (polyDOPA@paper). PolyDOPA@paper was prepared by oxidatively self-polymerizing DOPA under weak alkaline conditions and utilizing the adhesive property of polyDOPA on different materials. Compared to the uncoated cellulose paper, polyDOPA coating significantly enhances DNA adsorption owing to its abundant amino, carboxyl, and hydroxyl moieties. The DNA extraction mechanism using polyDOPA@paper was discussed. The maximum adsorption capacity of polyDOPA@paper for DNA was 20.7 μg cm -2 . Moreover, an automated extraction system was designed and fabricated using 3D printing technology. The device simplifies the operation and ensures the reproducibility and consistency of the results. More importantly, it eliminates the need for specialized training of operators. The feasibility of the polyDOPA@paper-based automated extraction system was evaluated by quantitatively detecting Escherichia coli in spiked milk samples via a real-time PCR. The detection limit was 10 2 cfu mL -1 . The results suggest that the system would have significant potential in detecting pathogens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hyperuricemia (HUA) has gradually become a public health burden as an independent risk factor for a variety of chronic diseases. Herein, a user-friendly point-of-care (POC) detection system (namely "Smart-HUA-Monitor") based on smartphone-assisted paper-based microfluidic is proposed for colorimetric quantification of HUA urinary markers, including uric acid (UA), creatinine (CR) and pH. The detection limits of UA and CR were 0.0178 and 0.5983 mM, respectively, and the sensitivity of pH were 0.1. The method was successfully validated in artificial urine samples and 100 clinical samples. Bland-Altman plots showed a high consistency between μPAD and the testing instruments (HITACHI 7600 Automatic Analyzer, URIT-500B Urine Analyzer and AU5800B automatic biochemical analyzer) in hospital. Smart-HUA-Monitor provides an accurate quantitative, rapid, low-cost and reliable tool for the monitoring and early diagnosis of HUA urine indicators., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The role of astrocytes in brain function has received increased attention lately due to their critical role in brain development and function under physiological and pathophysiological conditions. However, the biological evaluation of soft material nanoparticles in astrocytes remains unexplored. Here, the interaction of crosslinked hybrid vesicles (HVs) and either C8-D1A astrocytes or primary astrocytes cultured in polystyrene tissue culture or floatable paper-based chips is investigated. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) (P1) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine lipids are used for the assembly of HVs with crosslinked membranes. The assemblies show no short-term toxicity towards the C8-D1A astrocytes and the primary astrocytes, and both cell types internalize the HVs when cultured in 2D cell culture. Further, it is demonstrated that both the C8-D1A astrocytes and the primary astrocytes could mature in paper-based chips with preserved calcium signaling and glial fibrillary acidic protein expression. Last, it is confirmed that both types of astrocytes could internalize the HVs when cultured in paper-based chips. These findings lay out a fundamental understanding of the interaction between soft material nanoparticles and astrocytes, even when primary astrocytes are cultured in paper-based chips offering a 3D environment., (© 2022 The Authors. Advanced Biology published by Wiley-VCH GmbH.)

This research aims to develop white bread shelf-life extension sachet with controlled release of antimicrobial agent prepared from multicomponent bio-based materials. The structure of antimicrobial sachet consists of two major parts i.e., controlled release part and active part. The first part produced from paper coated with ethylene vinyl alcohol (EVOH). The second one was an active part which produced from biodegradable poly(butylene succinate) (PBS) and geraniol essential oil blend. Inhibition clear zone test results showed that a suitable geraniol concentration, encapsulated in PBS, was 10 wt%. Based on the water vapor transmission test, coating paper with EVOH for three times (around 450 μm) was an optimal condition for the use as a controlled release part. Release test indicated that geraniol migration concentration increased with increasing the relative humidity (RH) in the package which correlated to the moisture liberated from bread slice. Shelf-life extension study informed that the spoilage of bread stored with antimicrobial sachet was delayed by more than three weeks. In summary, this antimicrobial sachet could be used in food shelf-life extension purpose which easily placed in any food container. This is an alternative way of food waste minimization., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Microfluidic paper combines pump-free water transport at low cost with a high degree of sustainability, as well as good availability of the paper-forming cellulosic material, thus making it an attractive candidate for point-of-care (POC) analytics and diagnostics. Although a number of interesting demonstrators for such paper devices have been reported to date, a number of challenges still exist, which limit a successful transfer into marketable applications. A strong limitation in this respect is the (unspecific) adsorption of protein analytes to the paper fibers during the lateral flow assay. This interaction may significantly reduce the amount of analyte that reaches the detection zone of the microfluidic paper-based analytical device (µPAD), thereby reducing its overall sensitivity. Here, we introduce a novel approach on reducing the nonspecific adsorption of proteins to lab-made paper sheets for the use in µPADs. To this, cotton linter fibers in lab-formed additive-free paper sheets are modified with a surrounding thin hydrogel layer generated from photo-crosslinked, benzophenone functionalized copolymers based on poly-(oligo-ethylene glycol methacrylate) (POEGMA) and poly-dimethyl acrylamide (PDMAA). This, as we show in tests similar to lateral flow assays, significantly reduces unspecific binding of model proteins. Furthermore, by evaporating the transport fluid during the microfluidic run at the end of the paper strip through local heating, model proteins can almost quantitatively be accumulated in that zone. The possibility of complete, almost quantitative protein transport in a µPAD opens up new opportunities to significantly improve the signal-to-noise (S/N) ratio of paper-based lateral flow assays.

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features ( e.g. , electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm -1 , which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli , with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly- m -phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

Fluorescent nanoparticles are widely exploited as probes in cell tracking, drug delivery systems and high-performance security devices nowadays. Herein, we report the synthesis of novel 7-acryloxycoumarin (7-AC) through modification reaction of 7-hydroxycoumarin with acryloyl chloride and its copolymerization with methyl methacrylate and glycidyl methacrylate to produce epoxy-functionalized fluorescent polymer nanoparticles through emulsion polymerization. Chemical modification of cellulose pulp papers with the as-prepared fluorescent latex nanoparticles was also assessed. Spherical nanoparticles with average particle size of 40-93 nm and their diffusion into cellulosic fibers with excellent wetting and coating were monitored. Fluorimetery analysis demonstrated that immobilization of 7-AC into the hydrophobic acrylic copolymer substrate enhanced its emission intensity significantly with respect to its molecularly solution due to the elimination of unwanted environmental effects and non-radiative processes such as probable internal conversions. The obtained products exhibited intensified fluorescence emission with potentiality of being used in anticounterfeiting inks and security documents., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The development of actuators for power sources is essential for the efficient manipulation of fluids in microfluidics systems. In this work, a capacitor-type three-layer paper actuator was fabricated by sandwiching a polyelectrolyte layer between two films of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS). The paper actuator exhibited stable large electromechanical deformations in bilateral symmetry under alternating square-wave electric field. The actuation properties were examined in a function of voltage (±0.5, ±1, ±1.5, ±2, and ±2.5 V) and frequency (1, 0.5, 0.2, and 0.05 Hz). In addition, the PEDOT/PSS electrode films with different thicknesses were prepared, and the effects of actuator thickness on actuation properties were examined. As a result, it was found that the actuator displacement increased considerably with reducing actuator thickness. In addition, the actuator with a thickness of 48 μm demonstrated a maximum displacement of 5.8 mm at a voltage of 1.5 V and a frequency of 0.05 Hz. The proposed actuator can be potentially used in the development of power sources for micropumps and check valves of microfluidic devices.

Compared with traditional drug delivery methods, transdermal drug delivery has many advantages in avoiding the side effects in gastrointestinal tract, reducing the fluctuations in drug concentration, and improving patients' compliance. Among them, electrically controlled drug delivery is a promising solution. This work presents a wireless, battery-free and wearable device with electrically controlled drug delivery capability. The electronic component of the device is a flexible circuit board with a temperature sensor and a near-field communication module. With the help of smartphone, the device could wirelessly obtain energy and implement data transmission. The drug delivery component is a paper-based electrode modified with polypyrrole, in which non-steroidal anti-inflammatory drug sodium salicylate was encapsulated. The applied potential for electrically controlled drug delivery was more negative than -0.6 V. The drug release dose and release rates could be controlled by applying potentials with different amplitudes and durations through this device. It provided a minimalized wearable transdermal drug delivery platform for monitoring diseases such as gout. This wearable device shows promising potential in develop closed-loop drug delivery and monitoring systems for the treatment of various diseases.

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL -1 and a coefficient of variation <10%, which is equivalent to the performance of a high-sensitivity standard analyzer, and operated within acceptable levels stipulated by clinical guidelines. Moreover, cTnI clinical sample tests indicate a high correlation ( r = 0.981) with the contemporary analyzers, demonstrating the clinical utility of this platform in high-performance POCT.

Enzyme-based assays have been extensively used for the early diagnosis of disease-related biomarkers. However, these assays are time-consuming, resource-intensive, and infrastructure-dependent, which renders them unsuitable and impractical for use in resource-constrained areas. Thus, there is a strong demand for a biocompatible and potentially generalizable sensor that can rapidly detect cancer biomarkers at ultralow concentration. Herein, an enzyme-free, cost-efficient, and easy-to-use assay based on a novel approach that entails fluorescent molecularly imprinting conjugated polythiophenes (FMICPs) for cancer biomarkers detection is developed. The promising conjugated polythiophenes structure, with a PLQY as high as 55%, provides a straightforward, and affordable method for free-enzyme signal generation. More importantly, the feasibility of integrating printed-paper technology with a sensitive and cost-effective smartphone and portable prototype testing device that could be utilized for rapid point-of-care (POC) cancer diagnostics is successfully introduced. Significantly, the unique structure of FMICP nanofibers (FMICP NFs) displays superior performance with enhanced sensitivity that is 80 times higher than that of pristine FMICP. This assay could lower the limits of detection to 15 fg mL -1 and 3.5 fg mL -1 for α-fetoprotein (AFP) and carcinoembryonic antigen (CEA), respectively, which are three orders of magnitude exceeding that of the standard enzyme-based assay. Moreover, the developed sensors are successfully applied to the fast diagnosis of AFP in liver cancer patients and the FMICP and FMICP NFs results are in excellent agreement with those of clinical ELISA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A novel adsorbent, the uniform fiber ball (UFB) loaded with polypyrrole (UFB-PPy), was synthesized for Cr(VI) removal from water in this paper. The structure of the UFB and UFB-PPy were characterized by SEM, EDS, FT-IR, BET, XPS and TG. The adsorption properties of UFB-PPy towards Cr(VI) were investigated by the effects of temperature, initial concentration of Cr(VI), interfering ions and contact time in batch experiments, the isothermal models (Langmuir, Freundlich and Temkin) and the kinetic models (Pseudo first-order kinetic, Pseudo second-order kinetic and Intra-particle diffusion models) were used to describe the adsorption behavior. The effects of the initial concentration and flow rate of the Cr(VI) solution in the column experiments were also studied, and the dynamic models (Yoon-Nelson, Adams-Bohart and Wolborska model) were applied to predict the adsorption performance. The Cr(VI) removal mechanism of UFB-PPy was revealed by studying the effect of pH on adsorption, testing of Cl - , and analyzing the XPS. The results showed that UFB-PPy exhibited excellent adsorption properties for Cr(VI) both in batch and column adsorption. The possible adsorption mechanism involved electrostatic attraction, ion exchange and reduction. Conveniently, the chromium resources can be recovered with the form of high-purity Cr 2 O 3 by simple calcination of Cr(VI)-captured UFB-PPy (UFB-PPy-Cr)., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

We developed a paper-based analytical device based on the electropolymerization of poly (3,4-ethylenedioxythipohene) (PEDOT) and graphene oxide (GO) composites on the ITO substrate for the detection of uric acid (UA) in authentic human saliva. Scanning electron microscopy, UV-vis spectrum and X-ray diffraction confirmed the formation of porous PEDOT combined with GO film during the electropolymerization process. The nanocomposite based sensor showed an enhanced electrocatalytic activity toward UA with high sensitivity and stability. We demonstrate that UA can be directly detected in undiluted saliva using the paper-based electroanalytical device with no interference from ascorbic acid and dopamine that are normally present in biological fluids. The results indicated that the developed device is promising for non-invasive monitoring of salivary UA in human body., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A new planar sorptive phase based on the simple immobilization of polymeric ionic liquids on paper is proposed. The sorptive phase can develop hydrophobic or mixed-mode (combining hydrophobic and ion exchange) interactions with the target analytes. The polymer is prepared by the Radziszewski reaction, which takes place in aqueous media, and it has been thoroughly characterized by different techniques including infrared spectroscopy, matrix-assisted laser desorption/ionization coupled to high-resolution mass spectrometry and proton nuclear magnetic resonance. Three different strategies aimed to immobilize the polymeric ionic liquid on paper have been evaluated. Among them, simple thermal curing at 120 °C was selected. The as-prepared paper has been evaluated for the extraction of several non-steroidal anti-inflammatory drugs from urine, the analytes being finally determined by liquid chromatography with tandem mass spectrometry. The method detection limits were 3.8, 7.2, 6.8, 9.4, 15.7, and 5.1 μg/L for indomethacin, diclofenac, tolmetin, ketoprofen, naproxen, and ibuprofen, respectively. Calibration models were linear (R 2  > 0.9949) up to 1000 μg/L. The intra-day precision, expressed as relative standard deviation and calculated at three different concentrations levels (limit of quantification, 250 μg/L, and 1000 μg/L), varied between 1.1 and 13%. The accuracy, calculated as relative recovery, was in the range from 72 to 95%, thus being considered appropriate. The easiness of polymeric ionic liquid paper synthesis and the multi-sample extraction protocol designed allows the processing of a high number of samples at the same time., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A novel ratiometric fluorescent probe for the determination of oxytetracycline (OTC) was developed. The method is based on the use of adenosine monophosphate/Eu(III) nanoscale coordination polymers doped with carbon dots (CDs) (CD@AMP/Eu NCPs). These were fabricated by self-assembly of Eu 3+ and AMP on the surface of CDs containing large amounts of hydroxyl and carbonyl groups. Under the excitation at 310 nm wavelength, the doped NCPs display strong pink emission of Eu 3+ at 615 nm and blue emission of the CDs at 430 nm on exposure to OTC. The ratio of fluorescence intensity (F 615 /F 430 ) of such NCPs displays excellent linear relationship with OTC concentration ranging from 0.2 to 60 μM and the limit of detection (LOD) is 25 nM (3σ). The doped NCPs were evenly immobilized on common filter paper to prepare a visual ratiometric probe for the determination of OTC. Assisted by a digital camera with an APP color detector, the paper-based test strip was applied for the quantitative determination of OTC with a LOD of 0.5 μM and a wide linear scope of 1-100 μM. The method was applied to the determination of OTC in milk samples. Graphical abstractSchematic representation of the principle for oxytetracycline (OTC) determination using carbon dots (CD)@adenosine monophosphate (AMP)/Europium (Eu 3+ ) paper-based ratiometic probe.

Culturing cells in three-dimensional (3D) environment can obtain a better clinical prediction for evaluating chemotherapy protocols and become a standard culture practice in cancer research. However, it involves tedious and time consuming operation. In the current work, a paper/polymer composited microfluidic platform was developed for screening cell viability and protein expression under chemical gradient environment. Cells were cultured in a paper sheet and expressed cell properties in 3D environment. The paper sheet was encapsulated in the microfluidic platform generating chemical gradient. After the culture course, investigations of cell viability and protein expression were respectively achieved by directly adding reagent and conducting on-paper immunoassay. Activation of respective signaling pathway could be identified and responded to different stimulations including nutrient gradient, IL-6 cytokine gradient, and anti-cancer drug gradient. On-paper analysis of protein expression could be completed within 1.5 h. The present technique integrates tedious operations on a single paper substrate. It provides a first-tier screening tool for cellular response under chemical gradient., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In previous work, our group discovered a phenomenon in which a mixed polymer-salt or mixed micellar aqueous two-phase system (ATPS) separates into its two constituent phases as it flows within paper. While these ATPSs worked well in their respective studies to concentrate the target biomarker and improve the sensitivity of the lateral-flow immunoassay, different ATPSs can be advantageous for new applications based on factors such as biomarker partitioning or biochemical compatibility between ATPS and sample components. However, since the mechanism of phase separation in porous media is not completely understood, introducing other ATPSs to paper is an unpredictable process that relies on trial and error experiments. This is especially true for polymer-polymer ATPSs in which the characteristics of the two phases appear quite similar. Therefore, our group aimed to develop semiquantitative guidelines for choosing ATPSs that can phase separate in paper. In this work, we evaluated the Washburn equation and its parameters as a potential mathematical framework to describe the flow behavior of polymer-salt and micellar ATPSs in fiberglass paper. We compared bulk phase fluid characteristics and identified the viscosity difference between the phases as a key determinant of the potential for phase separation in paper. We then used this parameter to predict the phase separation capabilities of polyethylene glycol (PEG)-dextran ATPSs in paper and control the composition of the leading and lagging phases. We also, for the first time, successfully demonstrated the phase separation phenomenon in hydrogels, thereby extending its application and potential benefits to an alternative porous medium.

In this work, we provided a novel strategy of antibody-free biomarker analysis by in-situ synthesized molecularly imprinted polymers (MIPs) on movable valve microfluidic paper-based electrochemical device (Bio-MIP-ePADs) for clinical detection of biomarkers. The newly movable valves on the device enable continuous and convenient delivery of fluid, which guarantee the performance for fabricating MIPs structure during long time electropolymerization. Moreover, this strategy can directly detect antigens by taking advantage of molecular imprinting on paper-based device, which greatly decreases the cost during clinical testing, reduces the tedious washing procedure and does not need to consider the preservation of the antibody in enzyme linked immunosorbent assay (ELISA). This feature makes the chip suitable for the on-site family treatment or commercial products. To further validate the applicability of this proposed method for clinical diagnostic testing, carcinoembryonic antigen (CEA) was applied as prototyping model target for the clinical analysis. The proposed Bio-MIP-ePADs were cheap, easy to prepare, disposable and provided reliable analysis by comparing with ELISA. We hope the application of this technology will open up a new avenue to the point-of-care testing (POCT)., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Point-of-care (POC) detection and diagnostic platforms provide critical information about health and safety conditions in austere and resource-limited settings in which medical, military, and disaster relief operations are conducted. In this work, low-cost paper materials commonly used in POC devices are coated with liquid-infused polymer surfaces and folded to produce geometries that precisely localize complex liquid samples undergoing concentration by evaporation. Liquid-infused polymer surfaces were fabricated by infusing silicone-coated paper with a chemically compatible polydimethylsiloxane oil to create a liquid overlayer. Tests on these surfaces showed no remaining bacterial cells after exposure to a sliding droplet containing a concentrated solution of Escherichia coli or Staphylococcus aureus, while samples without a liquid layer showed adhesion of both microdroplets and individual bacterial cells. Folding of the paper substrates with liquid-infused polymer surfaces into several functional 3D geometries enabled a clean separation and simultaneous concentration of a liquid containing rhodamine dye into discrete, predefined locations. When used with bacteria, which are known for their ability to adhere to nearly any surface type, functional geometries with liquid-infused polymer surfaces concentrated the cells at levels significantly higher than geometries with dry control surfaces. These results show the potential of synergistically combining paper-based materials with liquid-infused polymer surfaces for the manipulation and handling of complex samples, which may help the future engineering of POC devices.

In this work, different paper surface modification strategies were compared to obtain an amine functionalized SBA-15 (N-SBA-15) composite for paper-based device development. The synthesized N-SBA-15 was characterized by N 2 adsorption-desorption isotherm, and infrared spectroscopy (FTIR), and it was incorporated to different polymer matrices (κ-carrageenan (CA), polyvinyl alcohol (PVA) and polyethylenimine (PEI)) for the development of the composite modified paper-based device. The retention, interactions, and morphology of the obtained composites were investigated by absorbance measurement, FTIR and scanning electron microscopy (SEM), respectively. To demonstrate the applicability of the modified paper-based device, ascorbic acid (AA) quantification was carried out. Horseradish peroxidase (HRP) was immobilized onto the modified paper surface. HRP in the presence of H 2 O 2 catalyzes the oxidation of 10-acetyl-3,7-dyhidroxyphenoxazine (ADHP) to highly fluorescent resorufin, which was measured by LIF detector. Thus, when AA was added to the solution, it decreases the relative fluorescence signal proportionally to the AA concentration. The linear range from 50 nmol L -1 to 1500 nmol L -1 and a detection limit of 15 nmol L -1 were obtained for AA quantitation. The obtained results allowed us to conclude that N-SBA-15/PEI composite could be considered an excellent choice for the paper-based device modification procedure due to its inherent simplicity, low cost, and sensitivity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We report results of the studies relating to the fabrication of a label-free, flexible, light weight and disposable conducting paper based immunosensing platform comprising of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and nanostructured iron oxide (nFe 2 O 3 @PEDOT:PSS) nanocomposite for detection of carcinoembryonic antigen (CEA), a cancer biomarker. The effect of various solvents such as sorbitol, ethanol, propanol, n-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO) on the electrical conductivity of Whatman filter paper (WP) modified with nFe 2 O 3 @PEDOT:PSS/WP was investigated. The electrical conductivity of the PEDOT:PSS/WP electrode was found to be enhanced by two orders of magnitude (from 6.8× 10 -4 to 1.92 × 10 -2 Scm -1 ) after its treatment with DMSO. Further, nFe 2 O 3 doped PEDOT:PSS/WP electrode exhibited the electrical conductivity as 2.4 × 10 -2 Scm -1 . Besides this, the incorporation of iron oxide nanoparticles (nFe 2 O 3 ) into PEDOT:PSS/WP resulted in improved electrochemical performance and signal stability. This nFe 2 O 3 @PEDOT:PSS/WP based platform was used for immobilization of the anti-carcinoembronic antigen (anti-CEA) protein for quantitative estimation of cancer biomarker (CEA). The results of electrochemical response studies revealed that this conducting paper based immunoelectrode had a sensitivity of 10.2 μAng -1 mLcm -2 in the physiological range (4-25 ngmL -1 ) and shelf life of 34 days. Further, the proposed immunoelectrode was validated with conventional ELISA for the detection of CEA in serum samples of cancer patients., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The research progress in the centrifugal microfluidic platform provides great opportunities for simple and effective analytical measurements in a variety of areas including biomedical engineering. In this study, we propose an optical reader that can measure the transmittance in a very sensitive and rapid manner on a hybrid paper-polymer centrifugal disc platform. This device enables real-time monitoring of multiple samples by measuring the absorbance of the light transmitted through the paper integrated on the disc between the light emitting diode (LED) and the photodiode (PD) regardless of the ambient light condition. To confirm its efficiency, we analyzed one of the blood's important indicators, glucose in a successful manner within 10 s without any additional complex image analysis. In addition, we discussed the results by comparing with the reflectance-based methods and with those of the previously reported studies by introducing a figure of merit to evaluate the performance of the assay., (Copyright © 2018 Elsevier B.V. All rights reserved.)

We demonstrate that the molecular structure of a synthetic homopolypeptide that resembles the leg architecture of water strider insects is effective to impart flexible polymeric surfaces with superhydrophobic behavior. Filter paper (FP) and polyester (PET) were modified with a coating consisting of low-molecular weight α-helical poly(γ-stearyl-α,l-glutamate) (PSLG, M w = 4500 Da) homopolypeptide. PSLG-coated substrates displayed near to and superhydrophobic behavior (≥150°) as reflected by the contact angle values. Despite being physically adsorbed, the PSLG coating uniformly covered and was strongly adhered to the substrate surfaces. The thin coating layer displayed remarkable mechanical abrasion resistance and was insensitive to long-time exposure to ambient conditions. PLSG-coated textile fibers exhibited useful and interesting properties. Under an iron-containing load, PSLG-coated PET was able to float and "walk" on water when exposed to a magnet. The PSLG coating was able to reduce the adhesion of Escherichia coli, model Gram-negative bacteria. The results indicated that the molecular geometry of PSLG homopolypeptide, which possesses a α-helical backbone sprouting out of highly hydrophobic stearyl side chains, was the key feature responsible for the observed behaviors. This study is relevant for a broad range of potential applications: from crop and drinking water management in arid geographic areas to biomedical devices and implants.

Traditional manufacturing methods and materials used to fabricate epidermal electronics for physiological monitoring, transdermal stimulation, and therapeutics are complex and expensive, preventing their adoption as single-use medical devices. This work describes the fabrication of epidermal, paper-based electronic devices (EPEDs) for wearable and implantable applications by combining the spray-based deposition of silanizing agents, highly conductive nanoparticles, and encapsulating polymers with laser micromachining. EPEDs are inexpensive, stretchable, easy to apply, and disposable by burning. The omniphobic character and fibrous structure of EPEDs make them breathable, mechanically stable upon stretching, and facilitate their use as electrophysiological sensors to record electrocardiograms, electromyograms, and electrooculograms, even under water. EPEDs can also be used to provide thermotherapeutic treatments to joints, map temperature spatially, and as wirelessly powered implantable devices for stimulation and therapeutics. This work makes epidermal electronic devices accessible to high-throughput manufacturing technologies and will enable the fabrication of a variety of wearable medical devices at a low cost.

This article describes the preparation and characterization of PEDOT-coated paper electrodes. Their specific behavior was investigated, especially the impact of electrode shape on the electrochemical properties. It was found that different electrode geometries promote different results, largely because of a potential drop in the bulk of the electrode material. More importantly, the suitability of these substrates for bio- and neurochemical analyses was investigated. The paper electrodes were found to offer better resistance to both protein and neurotransmitter foulings, in comparison to a planar electrode. Interestingly, long paper electrodes were more stable during sustained oxidation of dopamine and serotonin than short ones, possibly because of the conjunction of surface passivation and potential drop allowing for the site of oxidation to move along the electrode as fouling progresses., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first paper-based polyion-sensitive optodes are reported. Dinonylnaphthalene sulfonic acid (a cation exchanger) and chromoionophore I (a lipophilic optical pH indicator) are printed on filter paper in the absence of any plasticizer and/or additional hydrophobic polymeric phase. The resulting optodes exhibit sensitive colorimetric response to polycations such as protamine but not to small inorganic cations because only polycations are able to form cooperative ion pairs with dinonylnaphthalenesulfonate adsorbed to the cellulose paper. The color change of the optode is recorded via an iPhone camera and analyzed by an iPhone App. The protamine-sensing optode platform is used to indirectly detect protease activity (trypsin) based on proteolytic digestion of protamine, and polyanions (pentosan polysulfate and heparin) based on the strong binding reaction of polyanions with protamine. The indirect sensing system is further simplified on a multilayer membrane device that consists of an optode paper site modified with buffer to prevent optode dependence on sample pH, and an underlying cellulose acetate filter membrane coated with protamine to eliminate addition of the indicator polycation into the sample. The detection of pentosan polysulfate concentrations in an undiluted urine sample is successfully demonstrated via this approach. Lastly, it is shown that plasticizer-free polyanion-sensitive optodes based on an adsorbed layer of quaternary ammonium type anion exchanger and a phenolic azo type proton chromoionophore can also be fabricated directly on cellulose paper strips.

Cellulose paper is an ideal diagnostic platform for low-cost, easily disposable and lightweight implementation, but requires surface modification to achieve detection with high sensitivity and specificity in complex media. In this work, a polymer-catechol conjugate containing a superhydrophilic nonfouling poly(carboxylbetaine) (pCB) and four surface-binding l-3,4-dihydroxyphenylalanine (DOPA) groups, pCB-(DOPA) 4 , were applied onto a paper-based sensor surface via a simple "graft-to" immersion process to render the surface with both nonfouling and protein functionalizable properties. This dip-coating technique is effective, convenient and robust as compared to the "graft-from" techniques reported previously with similar nonfouling properties. The coated paper sensor showed both increased analyte diffusion rate and improved sensitivity of glucose detection in human blood serum. The capability of pCB-(DOPA) 4 -modified paper sensor for specific antigen-antibody detection was demonstrated via the covalent immobilization of bovine serum albumin antibody (anti-BSA) and fibrinogen antibody (anti-Fg) onto the pCB-coated surface via simple 1-ethyl-3-(3-(dimethylamino)propyl)-carbodiimide and N-hydroxysuccinimide (EDC/NHS) chemistry.

17β-estradiol (17β-E 2 ) usually is used to promote the growth of animal. Abuse of 17β-E 2 has become a global food security problem, because the residues in foods can cause endocrine disorder through the food chain. A novel molecularly imprinted polymer (MIP) grafted paper-based method for the sensitive and specific detection of 17β-E 2 was reported in this work. Results showed that the MIP's optimum synthetic conditions were as follows: 12 mL of acetonitrile was chosen as the solvent; the molar ratio of template molecule, functional monomer and cross linker was 1:12:12. MIP synthesized had a good recognition ability, the limit of detection (LOD) of established detection method for milk and human urine samples could reach 0.25μgL -1 ., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Inkjet-printed PEDOT:PSS electrodes are shown to record cutaneous electrophysiological signals such as electrocardiograms via a simple finger-to-electrode contact. The recordings are of high quality and show no deterioration over a 3 month period, paving the way for the development of the next generation of low-cost, convenient-to-use healthcare monitoring devices., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, we prepare cellulose nanopapers of high mechanical performance and with the electrical conductivity of a semiconductor. Cellulose nanofibers (CNF) from bleached softwood pulp were coated with polypyrrole (PPy) via in situ chemical polymerization, in presence of iron chloride (III) as oxidant agent. The structure and morphology of nanopapers were studied, as well as their thermal, mechanical and conductive properties. Nanopaper from pure CNF exhibited a very high tensile response (224MPa tensile strength and 14.5GPa elastic modulus). The addition of up to maximum 20% of polypyrrole gave CNF/PPy nanopapers of high flexibility and still good mechanical properties (94MPa strength and 8.8GPa modulus). The electrical conductivity of the resulting CNF/PPy nanopaper was of 5.2 10(-2)Scm(-1), with a specific capacitance of 7.4Fg(-1). The final materials are strong and conductive nanopapers that can find application as biodegradable flexible thin-film transistor (TFT) or as flexible biosensor., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Enzyme linked immunosorbent assay (ELISA) is one of the most widely used laboratory disease diagnosis methods. However, performing ELISA in low-resource settings is limited by long incubation time, large volumes of precious reagents, and well-equipped laboratories. Herein, we developed a simple, miniaturized paper/PMMA (poly(methyl methacrylate)) hybrid microfluidic microplate for low-cost, high throughput, and point-of-care (POC) infectious disease diagnosis. The novel use of porous paper in flow-through microwells facilitates rapid antibody/antigen immobilization and efficient washing, avoiding complicated surface modifications. The top reagent delivery channels can simply transfer reagents to multiple microwells thus avoiding repeated manual pipetting and costly robots. Results of colorimetric ELISA can be observed within an hour by the naked eye. Quantitative analysis was achieved by calculating the brightness of images scanned by an office scanner. Immunoglobulin G (IgG) and Hepatitis B surface Antigen (HBsAg) were quantitatively analyzed with good reliability in human serum samples. Without using any specialized equipment, the limits of detection of 1.6 ng/mL for IgG and 1.3 ng/mL for HBsAg were achieved, which were comparable to commercial ELISA kits using specialized equipment. We envisage that this simple POC hybrid microplate can have broad applications in various bioassays, especially in resource-limited settings.

Devices based on rapid, paper-based, isothermal nucleic acid amplification techniques have recently emerged with the potential to fill a growing need for highly sensitive point-of-care diagnostics throughout the world. As this field develops, such devices will require optimized materials that promote amplification and sample preparation. Herein, we systematically investigated isothermal nucleic acid amplification in materials currently used in rapid diagnostics (cellulose paper, glass fiber, and nitrocellulose) and two additional porous membranes with upstream sample preparation capabilities (polyethersulfone and polycarbonate). We compared amplification efficiency from four separate DNA and RNA targets (Bordetella pertussis, Chlamydia trachomatis, Neisseria gonorrhoeae, and Influenza A H1N1) within these materials using two different isothermal amplification schemes, helicase dependent amplification (tHDA) and loop-mediated isothermal amplification (LAMP), and traditional PCR. We found that the current paper-based diagnostic membranes inhibited nucleic acid amplification when compared to membrane-free controls; however, polyethersulfone allowed for efficient amplification in both LAMP and tHDA reactions. Further, observing the performance of traditional PCR amplification within these membranes was not predicative of their effects on in situ LAMP and tHDA. Polyethersulfone is a new material for paper-based nucleic acid amplification, yet provides an optimal support for rapid molecular diagnostics for point-of-care applications.

A modular, general method for trapping enzymes within the voids of paper, without chemical activation of cellulose, is reported. Glucose oxidase and peroxidase were crosslinked with poly(acrylic acid) via carbodiimide chemistry, producing 3-dimensional networks interlocked in cellulose fibers. Interlocking prevented enzyme activity loss and enhanced the washability and stability.

We introduce Synthetic Microfluidic Paper, a novel porous material for microfluidic applications that consists of an OSTE polymer that is photostructured in a well-controlled geometry of slanted and interlocked micropillars. We demonstrate the distinct benefits of Synthetic Microfluidic Paper over other porous microfluidic materials, such as nitrocellulose, traditional paper and straight micropillar arrays: in contrast to straight micropillar arrays, the geometry of Synthetic Microfluidic Paper was miniaturized without suffering capillary collapse during manufacturing and fluidic operation, resulting in a six-fold increased internal surface area and a three-fold increased porous fraction. Compared to commercial nitrocellulose materials for capillary assays, Synthetic Microfluidic Paper shows a wider range of capillary pumping speed and four times lower device-to-device variation. Compared to the surfaces of the other porous microfluidic materials that are modified by adsorption, Synthetic Microfluidic Paper contains free thiol groups and has been shown to be suitable for covalent surface chemistry, demonstrated here for increasing the material hydrophilicity. These results illustrate the potential of Synthetic Microfluidic Paper as a porous microfluidic material with improved performance characteristics, especially for bioassay applications such as diagnostic tests.

Recycling hazardous wastes to produce value-added products is becoming essential for the sustainable progress of our society. Herein, highly porous carbon (1625 m(2)  g(-1)) is synthesized using waste tires as the precursor and used as a supercapacitor electrode material. The narrow pore-size distribution and high surface area led to good charge storage capacity, especially when used as a three-dimensional nanoscaffold to polymerize polyaniline (PANI). The composite paper was highly flexible, conductive, and exhibited a capacitance of 480 F g(-1) at 1 mV s(-1) with excellent capacitance retention of up to 98% after 10,000 charge/discharge cycles. The high capacitance and long cycle life were ascribed to the short diffusional paths, uniform PANI coating, and tight confinement of the PANI in the inner pores of the tire-derived carbon through π-π interactions, which minimized the degradation of the PANI upon cycling. We anticipate that the same strategy can be applied to deposit other pseudocapacitive materials to achieve even higher electrochemical performance and longer cycle life-a key challenge for redox active polymers., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Conductive tattoo nanosheets are fabricated on top of decal transfer paper and transferred on target surfaces as temporary transfer tattoos. Circuits are patterned with ink-jet printing. Tattoo nanosheets are envisioned as unperceivable human-device interfaces because of conformal adhesion to complex surfaces including skin. They are tested as dry electrodes for surface electromyography (sEMG), which permits the control of a robotic hand., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, a new molecularly imprinted polymer (MIP) based lab-on-paper device with chemiluminescence (CL) detection of dichlorvos (DDV) was designed. With the circle-shaped device, the MIP layer with certain depth was synthesized and adsorbed on the paper surface and DDV can be selectively imprinted on it. The adsorption and washing procedures can be achieved well on the paper-based chip. The paper-based device was fabricated by a simple cutting method and many chips can be made at the same time. On the basis of DDV enhancing CL of luminol-H2O2 greatly, the proposed MIP based lab-on-paper CL device showed better selectivity to DDV and it has been applied to the determination of DDV in vegetables in the range of 3.0 ng/mL-1.0 μg/mL with the detection limit of 0.8 ng/mL. This study has made a successful attempt in the development of highly selective and sensitive monitoring of DDV in real samples and will provide a new approach for sensitive and specific assay in environmental monitoring., (Copyright © 2015 Elsevier B.V. All rights reserved.)

We report a new paper-based surface enhanced Raman scattering (SERS) substrate platform contributed by a poly(l-lactic acid) (PLLA) nanofibrous paper adsorbed with plasmonic nanostructures, which can circumvent many challenges of the existing SERS substrates. This PLLA nanofibrous paper has three-dimensional porous structure, extremely clean surface with good hydrophobicity (contact angle is as high as 133.4°), and negligible background interference under Raman laser excitation. Due to the strong electrostatic interaction between PLLA nanofiber and cetyltrimethylammonium bromide (CTAB) molecules, the CTAB-coated gold nanorods (GNRs) are efficiently immobilized onto the fibers. Such a hydrophobic paper substrate with locally hydrophilic SERS-active area can confine analyte molecules and prevent the random spreading of molecules. The confinement leads to focusing effect and the GNRs-PLLA SERS substrate is found to be highly sensitive (0.1 nM Rhodamine 6G and malachite green) and exhibit excellent reproducibility (∼8% relative standard deviation (RSD)) and long-term stability. Furthermore, it is also cost-efficient, with simple fabrication methodology, and demonstrates high sample collection efficiency. All of these benefits ensure that this GNRs-PLLA substrate is a really perfect choice for a variety of SERS applications.

A simple and low-cost fabrication method for paper-based diagnostic devices (PBDDs) is described in this study. Street-available polymer solutions were screen printed onto filter papers to create hydrophobic patterns for fluidic channels. In order to obtain fully functional hydrophobic patterns for fluids, the original polymer solutions were diluted with butyl acetate to yield a suitable viscosity range between 30-200 cP for complete patterning on paper. Typical pH and glucose tests with color indicators were performed on the screen printed PBDDs. Images of the PBDDs were analyzed by computers to obtain calibration curves for pH between 2 and 12 and glucose concentration ranging from 10-1000 mmol dm(-3). Detection of formaldehyde in acetone was also carried out to show the possibility of using this PBBD for analytical detection with organic solvents. An exemplar PBDD with simultaneous pH and glucose detection was also used to demonstrate the feasibility of applying this technique for realistic diagnostic applications.

New biodegradable nanocomposites have been successfully prepared by incorporating modified nano-cellulose fibers (NCF) in a biodegradable polylactic acid (PLA) matrix in this work. The hydrophobic-modified NCF was obtained by grafting hydrophobic monomers on NCF to improve the compatibility between NCF and PLA during blending. The resulting NCF/PLA composites were then applied on paper surface via a cast-coating process in an attempt to reduce the water vapor transmission rate (WVTR) of paper. The WVTR tests, conducted under various testing conditions and with different coating weights, demonstrated that the modified NCF/PLA composites coating played a critical role in lowering WVTR of paper. The lowest WVTR value was 34 g/m(2)/d, which was obtained with an addition of 1% of modified NCF to PLA and the composites coating weight at 40 g/m(2) and substantially lower than the control value at 1315 g/m(2)/d. The paper coated with the modified biodegradable composite is promising as green-based packaging materials., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Concentrations and distribution characteristics of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans (2,3,7,8-PCDD/Fs) were analyzed in waste water from a paper mill. And concentrations of 2,3,7,8-PCDD/Fs in waste water before and after electron beam irradiation with different doses were compared. The feasibility, mechanism and rates of 2,3,7,8-PCDD/Fs degradation were discussed. The PCDD/Fs concentrations and corresponding I-TEQ (toxic equivalent quantity) values were 239 pg x L(-1) and 41.0 pg x L(-1), respectively, in the waste water. The concentrations of total 2,3,7,8-PCDD/Fs decreased after electron beam radiolysis at a dose of 30 kGy and 60 kGy with degradation rates of 5.27% and 23.6%, respectively.

Given their simplicity and functionality, paper-based microfluidic systems are considered to be ideal and promising bioassay platforms for use in less developed countries or in point-of-care services. Although a series of innovative techniques have recently been demonstrated for the fabrication of such platforms, development of simple, inexpensive and versatile new strategies are still needed in order to reach their full potential. In this communication, we describe a simple yet facile approach to fabricate paper-based sensor platforms with a desired design through a vapor-phase polymer deposition technique. We also show that the fabricated platforms could be readily employed for the detection of various biological target molecules including glucose, protein, ALP, ALT, and uric acid. The limit of detection for each target molecule was calculated to be 25 mg dL(-1) for glucose, 1.04 g L(-1) for protein, 7.81 unit per L for ALP, 1.6 nmol L(-1) for ALT, and 0.13 mmol L(-1) for uric acid.

Ionic polymer actuators driven by electrical stimuli have been widely investigated for use in practical applications such as bioinspired robots, sensors, and biomedical devices. However, conventional ionic polymer-metal composite actuators have a serious drawback of poor durability under long-term actuation in open air, mainly because of the leakage of the inner electrolyte and hydrated cations through cracks in the metallic electrodes. Here, we developed a highly durable and water-floatable ionic polymer artificial muscle by employing hydrophobic and asymmetrically laser-scribed reduced graphene oxide paper electrodes (HLrGOP). The highly conductive, flexible, and cost-effective HLrGOP electrodes have asymmetrically smooth hydrophobic outer and rough inner surfaces, resulting in liquid-impermeable and water-floatable functionalities and strong bonding between an ionic polymer and the electrodes. More interestingly, the HLrGOP electrode, which has a unique functionality to prevent the leakage of the vaporized or liquid electrolyte and mobile ions during electrical stimuli, greatly contributes to an exceptionally durable ionic polymer-graphene composite actuator that is a prerequisite for practical applications in active biomedical devices, biomimetic robots, touch-feedback haptic systems, and flexible soft electronics.

Four samples of paper and board (P/B) of a type used for packaging dry foods were subjected to migration tests using mushrooms, apples, potatoes and bananas, and using the polymeric powder Tenax as a food simulant. The P/B samples contained only low levels of diisopropylnaphthalene (DiPN) and diisobutyl phthalate (DiBP) and so the experiments were conducted after impregnating the P/B with added model substances. These were o-xylene, acetophenone, dodecane, benzophenone, DiPN and DiBP. Migration levels depended strongly on the nature of the substance and on the nature of the food and much less on the characteristics of the P/B, except insofar as they affected the contact area - flexible papers giving more extensive contact with the food than thick rigid board. Migration into Tenax was at least a factor of 10 higher than migration into the fresh fruit and vegetables. The food samples were placed in contact with the P/B and then overwrapped loosely with aluminium foil and so this correction factor will tend to be conservative compared with a more open storage of the packed foods. Washing, peeling or cooking the fruits and vegetables after contact with the P/B had a surprisingly small effect on contaminant levels in general, and no one processing step was effective in giving a significant reduction of all the types of chemicals studied. This was because either they had penetrated into the food (so resisting peeling), or were not freely water-soluble (so resisting washing) or were not particularly volatile (so resisting loss by evaporation during cooking).

The detection of pesticides has attracted considerable attention in numerous fields, such as environmental monitoring and food safety. Although traditional sensors for pesticides have been widely explored due to their high sensitivity and specificity, it is still challenging to develop a low-cost, portable, fast, and easy-to-use detection method for the public use at home or in the field. To address these challenges, herein, we report a novel paper-based molecular imprinted polymer (MIP)-grafted multi-disk micro-disk plate (P-MIP-MMP) for sensitive and specific chemiluminescence (CL) detection of pesticides through an indirect competitive assay using 2,4-dichlorophenoxyacetic acid (2,4-D) as a proof-of-concept analyte. The MIP-grafted paper disks were prepared by a simple in situ polymerization of MIP layer on the surface of cellulose fibers in paper. The quantification mechanism of this P-MIP-MMP is based on a competition between free 2,4-D and tobacco peroxidase (TOP) labeled 2,4-D and the enzyme catalyzed CL emission from the luminol-TOP-H2O2 CL system. At optimal conditions, this P-MIP-MMP can detect 2,4-D at the concentration of femtomolar level. This approach provided a powerful protocol for simple, low-cost, rapid, and high-throughput detection of pesticides in real samples with satisfactory results for use in areas such as food inspection and environmental monitoring., (Copyright © 2013 Elsevier B.V. All rights reserved.)

In this work, microfluidic paper-based analytical device (μ-PAD) was applied in a photoelectrochemical (PEC) method and thus a truly low-cost, simple, portable, and disposable microfluidic PEC origami device (μ-PECOD) was demonstrated. The molecular imprinting technique was introduced into microfluidic paper-based analytical devices (μ-PADs) through electropolymerization of molecular imprinted polyaniline (MPANI) in a novel Au nanoparticle (AuNP)-modified paper working electrode (Au-PWE). This is fabricated through the growth of an AuNP layer on the surfaces of cellulose fibers in the PWE. Under visible light irradiation, MPANI can generate the photoelectric transition from the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO), delivering the excited electrons to the AuNPs, and then to the carbon working electrode. Simultaneously, it is believed that a positively charged hole of MPANI that took part in the oxidation process was consumed by ascorbic acid (AA) to promote the amplifying photocurrent response. On the basis of this novel MPANI-Au-PWE and the principle of origami, a microfluidic molecular imprinted polymer (MIP)-based photoelectrochemical analytical origami device (μ-MPECOD), comprised of an auxiliary tab and a sample tab, is developed for the detection of heptachlor in the linear range from 0.03 nmol L(-1) to 10.0 nmol L(-1) with a low detection limit of 8.0 pmol L(-1). The selectivity, reproducibility, and stability of this μ-MPECOD are investigated. This μ-MPECOD would provide a new platform for high-throughput, sensitive, specific, and multiplex assay in public health, environmental monitoring, and the developing world.

We previously produced a bactericidal filter paper loaded with PAA47-b-PS214 block copolymer micelles containing the biocide triclosan (TCN), using cationic polyacryamide (cPAM) as a binder. However, we encountered a very slow filtration, resulting in long bacteria deactivation times. Slow drainage occurred only when the filter paper was left to dry. It appears that the filter paper with cPAM and micelles develops hydrophobic properties responsible for this very slow filtration. Three approaches were taken to accelerate the very slow drainage all based on modification of binder-micelle interactions: (i) keeping the micelles wet, (ii) modification of the corona, and (iii) replacing cPAM with smaller and more highly charged cationic poly(isopropanol dimethylammonium) chloride (PIDMAC). In all cases, the drainage time of bactericidal filter paper became close to that of untreated filter paper, without decreasing its efficiency. Moreover, replacing cPAM with PIDMAC led to a much more efficient bactericidal filter paper that reduced bacteria viability by more than 6 orders of magnitude. In addition to resolving the hydrophobic drainage hurdle, the three solutions also offer a better understanding of the interaction between cPAM and micelles in the filter paper.