Search

Tea polyphenols are considered as an important indicator of tea quality. Rapid detection of tea polyphenol content plays a valuable role for tea breeding and quality inspection during tea production. In this work, a portable rapid non-destructive detection device of tea polyphenols in fresh tea leaves was developed, which integrated the fusion technology of visible/short-wave (400–1050 nm) and long-wave (1000–1650 nm) near-infrared spectroscopy (Vis/NIR). Experimental results indicated that the spectra within the overlapping region (1000–1050 nm) were assembled by applying the spectral data fusing method. Followed by spectral data preprocessing with the Savitzky–Golay smoothing (SG) method, least squares support vector regression (LS–SVR) models were established for detecting the tea polyphenol content of fresh tea leaves. Based on the fused Vis/NIR spectra (dual-band), the correlation coefficient of calibration (RC), root mean square error of calibration (RMSEC), correlation coefficient of prediction (RP), root mean square error of prediction (RMSEP), and residual predictive deviation (RPD) reached 0.976, 0.679%, 0.893, 0.897%, and 2.230, respectively, which were better than the visible/short-wave or long-wave near infrared spectral data (single-band). The sensitive spectral wavebands of tea polyphenols extracted using the random frog (RF) algorithm were distributed in 402–448 nm, 555–600 nm, 810–1042 nm, 1056–1103 nm, 1219–1323 nm, 1406–1416 nm, and 1499–1511 nm. This demonstrated that the prediction of tea polyphenol content using fused spectral data combined with the LS–SVR model depended on various functional groups such as auxochromes, chromogenic groups, and hydrogen-containing groups. The proposed device is capable of non-destructive detection of tea polyphenol content in fresh tea leaves, which can provide effective technical support for tea breeding and tea leaf quality control. [ABSTRACT FROM AUTHOR]

Drying is an essential pre-treatment prior to extraction of tea polyphenols from tea leaves, which is a time and energy-intensive process. In this study, pulsed electric field (PEF) was utilized to replace the conventional thermal dehydration procedure before the phenolic extraction. The influence of different PEF conditions on total polyphenol yield from fresh tea leaves combined with a solid-liquid extraction were compared. PEF treatment at 1.00 kV/cm electric field strength, 100 pulses of 100 μs pulse duration, and 5 s pulse repetition, which delivered 22 kJ/kg and induced 1.5 °C of temperature increase, was used for further study on the extraction kinetics of green tea catechins. The results indicated that compared to oven drying, PEF pre-treatment increased the extraction rate by approximately two times, without significantly altering the phenolic profiles, as revealed by using liquid chromatography combined with mass spectrometry. Scanning electron microscopy imaging revealed that PEF pre-treatment induced the formation of inhomogeneously distributed pores and protuberances on the surface of leaf tissues, which might facilitate the penetration of extraction solvent and the migration of phenolics. This study demonstrates that PEF as a time and energy efficient processing method is a promising alternative for the conventional drying process before further tea polyphenol extraction. [ABSTRACT FROM AUTHOR]

The major interest in pulsed electric field treatment of biological tissues is derived from its non-thermal application: increasing cell permeability. This application has an important implication in extraction of complex organic molecules. In this work, pulsed electric field treatment is investigated as a mild (non-thermal) processing method for opening the cell structure in fresh tea leaves. Pulsed electric field utilizes short-duration high-voltage pulses for opening the cell structure by the process called electroporation. Upon the treatment, subsequent extraction of complex organic molecules, particularly, polyphenols, occurs. The amount of extracted polyphenols (in this case, the extraction yield) has been determined as a function of electric field strength, duration and number of applied pulses, as well as energy input per unit of mass of the sample. The results indicate that the used conditions during the treatment increase in temperature did not exceed 10 °C. This limited temperature rise provides a valid evidence that pulsed electric field processing is a non-thermal method applied under used conditions. [ABSTRACT FROM AUTHOR]