Search

Nano-SiO 2 porous thermal insulating material (TIM) has drawn tremendous research interests due to its advantages of low density, high porosity and low thermal conductivity. However, its long-term stability in humid environment can be severely deteriorated by the high hydrophilicity resulting from tetrahedral coordination of oxygen and capillary effect of porous structure. It is still a great challenge to cost-effectively fabricate bulk TIM with superior hydrophobicity and consequent remarkable self-cleaning capability. Herein, via an oil-in-water microemulsion treatment, we have proposed a new strategy to construct 3D superior hydrophobic nano-SiO 2 porous TIM. The polymethylhydrosiloxane-modified TIM exhibits a large water contact angle of 166°, and corresponding excellent self-cleaning characteristic while maintaining low thermal conductivity of 0.031 W/m·K. Moreover, our high hydrophobicity of TIM exhibits excellent durability under high temperature up to 400 °C, high humidity of 100%, and chemical erosions. Detailed knowledge of the physical chemistry basis of the superior hydrophobic nano-SiO 2 porous TIM can provide great opportunity to fabricate advanced self-cleaning and heat insulating devices especially targeted for harsh environments. [ABSTRACT FROM AUTHOR]

Abstract: Porous sialon ceramics have been cost-effectively prepared by pressureless sintering from a mixture of elongated SHS β-sialon powders with an α-sialon precursor composition composed of α-Si3N4, AlN, Y2O3 and Al2O3. The obtained porous sialon ceramics exhibited low shrinkage and homogeneous pore size distribution. The results of X-ray diffraction and scanning electron microscopy showed that a uniform microstructure with elongated and intermingled β-SiAlON grains, which were strongly connected by α-SiAlON phase, has been obtained. [Copyright &y& Elsevier]

The strong covalent bonding of SiC makes it difficult to be fully sintered using conventional sintering techniques. Therefore, electrical current-assisted sintering techniques such as spark plasma sintering are needed to sinter SiC. The finite numerical simulations have been generally used to predict and guide sintering processes of ceramics (i.e.TiC,AlO 3). In this work, the numerical simulations of the temperature distribution, electrical field and thermal field on the porous SiC cylindrical samples by Comsol were investigated in details. The influence of porosity on the temperature distribution and electrical field distribution of the SiC samples were analyzed. Both the maximum current density (1.19 × 107A/m2) and the maximum temperature (2030 °C) of the SPS device occurred at the punch/spacer interface. The temperature values at the centre of the samples were proportional to the porosity, and the temperatures at the center of the samples increased from ∼1960 °C to ∼2010 °C at t = 2000s, with the porosity increasing from 1% to 60%. The uniformity of the temperature distribution deteriorated as the porosity increases, and the temperature gradients between the center and edge of the samples with the porosity of 1% and 60%, were ∼80 °C and ∼130 °C at t = 2000s, respectively. [ABSTRACT FROM AUTHOR]

This paper presents that polyethylene glycol (PEG) synthesizes a form-stable phase change material (FS-PCM) with high thermal conductivity and considerable heat storage density. PEG was confined to the chain structure of epoxy resin (EP) via high-temperature melt blending and curing, which solves the leakage problem of PCMs during phase transformation. In order to increase the thermal conductivity and stability of the PEG/EP while maintaining good heat storage capacity and insulation ability, a low loading of reticulated porous Al 2 O 3 ceramic (RPC) was introduced into the PEG/EP matrix. RPC increases the thermal conductivity of FS-PCM by 5.5 times and the heat storage rate by 4 times. In addition, FS-PCM filled with 13.8 vol% RPCs has a coefficient of thermal expansion (CTE) of 80 ppm/K at 85–150 °C -a decrease of 62% over the matrix. Furthermore, the BN network is formed on RPC by vacuum impregnation technology, which further improves the thermal conductivity. This novel FS-PCM has excellent comprehensive properties and does not need for case package, indicating great prospects in thermal management and thermal storage. [ABSTRACT FROM AUTHOR]

The ability of Hypermer KD1 to disperse high solids loading reaction sialon suspensions for slip casting has been characterised. It has been found to be a very effective dispersant in organic media of 60-vol.% MEK and 40-vol.% Ethanol, yielding fluid and highly homogeneous suspensions. The effects of added amounts of KD1 have been observed through adsorption data, sedimentation tests and rheology measurements. KD1 imparts low viscosity and stability to the suspension. It has been found that 3-wt.% addition of KD1, based on the weight of reaction sialon powders, results in a very stable and high flowable suspension with near Newtonian flow behavior. Less amounts of dispersant lead to unstable suspensions with obvious shear thinning flow behaviors, while adding excessive dispersant leads to high viscosities, especially at high solids loading. Measuring the pore size distribution of green bodies from different suspensions has proved the effects of dispersant amounts on dispersing the slurries and on slip casting performance. [Copyright &y& Elsevier]