Search

The Tulasu Basin is an important epithermal gold ore cluster situated in the Boluokenu Polymetallic Belt, Western Tianshan, China. The Axi Au, Tabei Pb–Zn, and Tawuerbieke Au deposits in this basin represent different types of epithermal mineralization. These are products of the same tectonic‐magmatic‐hydrothermal event, related to the southward subduction of the North Tianshan Ocean beneath the Yili‐Central Tianshan Plate during the Late Devonian to Early Carboniferous. The spatial relationships, preservation levels, and evolution of the three deposits are still debated. Hence, systematic geological field investigations, ore microscopy, and isotopic analyses were carried out on these three deposits. The S–Pb–C–H–O isotopic compositions indicate that the ore‐forming components were derived from the volcanic‐subvolcanic rocks, as well as from circulating meteoric waters. The occurrence of adularia, silicified platy carbonates, and quartz characterized by crustiform/colloform/colloidal textures at Axi indicate that boiling was the main precipitation mechanism for the Au mineralization. The Pb–Zn ores from Tabei are characterized by abundant banded coarse‐grained quartz crystals with dog tooth and comb textures, suggesting that the sulphides precipitated slowly due to conductive cooling. The Tawuerbieke Au deposit is characterized by pervasive silicification and phyllic alteration accompanying veinlet and disseminated ore, which formed via metasomatic water–rock interaction. According to the ore textures, intrusion sizes, and mineral assemblages, it can be inferred that all three deposits experienced different extents of erosion (Axi < Tabei < Tawuerbieke) and that there is exploration potential for concealed porphyry Cu–Au mineralization. Exploration should focus on deep targets beneath the Tawuerbieke Au deposit. [ABSTRACT FROM AUTHOR]

• The Lailisigao'er and Qixing deposits are coeval and both related to the granodiorite porphyries. • Fluid immiscibility and mixing were the precipitation mechanism for Mo and Pb-Zn, respectively. • The Qixing Pb-Zn deposit represents a distal end-member centered on Mo-mineralized porphyries. • Concealed porphyry Cu-Mo mineralization may be developed underneath No. 3571 and Qixing areas. The Nailenggele orefield, located in the northwestern Chinese Tianshan Orogenic Belt, is composed of the Lailisigao'er Mo deposit, No. 3571 Cu prospect and Qixing Pb-Zn deposit. Lailisigao'er is a typical porphyry deposit with characteristic veinlet-disseminated ores and potassic, phyllic and propylitic alterations. No. 3571, situated in the peripheral of Lailisigao'er, is characterized by large amounts of oxidized ores at surface with limited intrusions outcropped. Qixing, about 3 km from Lailisigao'er, is characterized by quartz-sulfide veins controlled by fractures. This study aims to examine the genetic relationships between these deposits and/or occurrences, and discuss the significance for further exploration in the orefield and elsewhere in the region. LA-ICP-MS U-Pb dating on zircons from the ore-bearing porphyry in the Lailisigao'er deposit yielded an age of 367.5 ± 4.8 Ma. The molybdenite Re-Os and sphalerite Rb-Sr isochron ages recalculated from previously published data are 365.9 ± 2.1 Ma for Lailisigao'er and 362.0 ± 5.7 Ma for Qixing, respectively, suggesting that they are coeval and both related to the granodiorite porphyries. Three types of fluid inclusions occur in the Mo-bearing quartz from Lailisigao'er, including two-phase aqueous inclusions (Type I), solid mineral-bearing aqueous inclusions (Type II) and CO 2 -H 2 O inclusions (Type III). The total homogenization (T h) temperatures cluster from 260 to 320 °C (to liquid) for type I inclusions, 310 to 332 °C (to liquid) for type II inclusions, and 268 to 324 °C (to CO 2 phase) for type III inclusions. The salinities are mainly in the ranges of 2.0–8.0, 32.9–42.0, and 1.4–5.5 wt% NaCleq for types I, II and III inclusions, respectively. By contrast, only type I inclusions were identified in the Pb-Zn-bearing quartz from Qixing, with T h values of 149–261 °C and salinities of 1.7–5.3 wt% NaCleq. The δ34S CDT values of hydrothermal sulfides from Lailisigao'er, No. 3571 and Qixing range from 2.8‰ to 4.0‰, 4.0‰ to 4.6‰ and 0.7‰ to 4.9‰, respectively. Sulfides from these three locations have uniform Pb isotopic compositions. The (87Sr/86Sr) 0 ratios of fluid inclusions (average 0.70971) in Mo-bearing quartz at Lailisigao'er and sphalerite (average 0.71020) at Qixing are similar to those of Mo-mineralized porphyries (average of 0.70886) from Lailisigao'er. The δ18O H2O and δD H2O values of Pb-Zn-bearing quartz from Qixing are similar to those of Mo-bearing quartz from Lailisigao'er, both plotting close to the field of magmatic water but shifted toward the meteoric line. These geochronological, fluid inclusions and isotopic data suggest that the mineralization at different localities in the Nailenggele orefield constitutes part of an integrated magmatic-hydrothermal system centered on the Lailisigao'er porphyry Mo deposit, with the Qixing Pb-Zn polymetallic deposit representing a distal end-member. Both metals and sulfur were dominantly derived from porphyritic intrusions, whereas the ore-forming fluids were initially derived from the magmatic intrusions, with increasing involvement of meteoric water in time and distance from magmatic-hydrothermal center. Fluid immiscibility in the early stage and fluid mixing in the later stage, together with cooling, were responsible for ore precipitation. Based on this mineralization model, it is inferred that concealed porphyry Cu-Mo mineralization may be developed underneath the No. 3571 and Qixing. [ABSTRACT FROM AUTHOR]

[Display omitted] • Unidirectional solidification texture can chronicle the magmatic-hydrothermal evolution. • Multi-generational quartz distinguished by CL textures manifests the overall evolutionary history at Lailisigaoer. • Aluminum, Ti, Na and K can directly or indirectly signify variations in CL intensity of quartz. • Decompression, cooling, and the CO 2 concentration in hydrothermal fluid trigger Mo precipitation at 3.4–3.6 km. The Lailisigaoer deposit is a typical porphyry Mo deposit located in the late Paleozoic Boluokenu metallogenic belt of Western Tianshan, NW China. This study aims to understand molybdenum mineralization and the dynamics of magmatic-hydrothermal fluid within the porphyry system, focusing on fluid inclusion, cathodoluminescence textures, and trace elemental composition in various generations of quartz. Six vein types in the Lailisigaoer deposit are classified as comb quartz veins with unidirectional solidification texture (UST, Q I), actinolite/biotite ± quartz veinlets (M-type, Q II), quartz-chalcopyrite vein (A-type, Q III), quartz-molybdenite vein (B-type, Q IV), quartz-pyrite vein (D-type, Q V) and quartz-carbonate vein (E-type, Q VI). Micro thermometry data indicate decreasing homogenization temperatures in primary fluid inclusions from UST to E-type veins. The magmatic-hydrothermal fluids associated with UST and M-, A-, B-, D-, E-type veins underwent a transition from high temperature (342–495℃), high-pressure (∼1.25 kb), and variable salinity (6.7–41.1 wt%NaCl) in the H 2 O-CO 2 -NaCl system to low-temperature (142–238℃), low-pressure (∼0.25 kb), and low-salinity (1.6–5.1 wt%NaCl) in the H 2 O-NaCl system. This evolution is reflected in the proportion of quartz with oscillatory zones decreasing and irregular quartz increasing, indicating a shift from turbulent to stable fluid conditions. Furthermore, a gradual reduction in Ti concentration (from 79 ppm in UST to 1.4 ppm in E-type quartz) suggests a decrease in fluid temperature during the magmatic-hydrothermal evolution. Mineralization primarily occurs in A- and B-type veins, with molybdenum precipitation attributed to fluid immiscibility in a medium–high temperature (240–368 ℃) and high pressure (∼0.95 kb) environment. The A-type veins (mean 31 ppm in Ti concentrations) consist of equigranular (dark-core) (Q III-1) and patchy inhomogeneous CL-gray quartz (Q III-2). The B-type veins (mean 24 ppm in Ti concentrations) are characterized by equigranular (bright-core) inhomogeneous quartz (Q IV-1) with growth zones that are cemented by later mosaic homogeneous CL-gray quartz (Q IV-2). Based on the quartz-Ti thermometer, the mineralized veins (A- and B-type) were confined to be formed at depths of 2.8–3.6 km, with molybdenum mineralization occurring at 3.4–3.6 km. Molybdenum mineralization initiates during the Q IV-1 crystallization period in magmatic-hydrothermal fluids and terminates in the Q V-2 generation. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Granodiorites and MMEs of the Late Devonian Husite intrusion were derived from the mixing of felsic and mafic melts. • The Boluokenu metallogenic belt was in a continental-arc setting due to the slab roll-back of Paleo-Junggar plate. • MMEs within granitic rocks can be used for prospecting porphyry and skarn Cu-dominated polymetallic deposits. Abstract Many porphyry and skarn Cu (Fe, Mo, Au, Zn) deposits have been discovered along the western Tianshan Orogenic Belt within the Central Asian Orogenic Belt. Generally, these Cu polymetallic deposits are considered to be linked to porphyries that formed in an arc setting, e.g., in a continental magmatic arc and island magmatic arc, but an agreement on their source region has not been reached. The Husite granitic complex and associated Kekesala skarn Fe-Cu deposit from the Boluokenu metallogenic belt provide significant insights into a comprehensive study of the ore-forming porphyries in Boluokenu. The ore-forming porphyries are mainly granodiorites and belong to calc-alkaline and high-K calc-alkaline series. LA-ICP-MS zircon U-Pb dating on the granodiorites yields ages of 368 Ma. The trace element compositions of the granodiorites are characterized by enrichment in large ion lithophile elements (LILE) and light rare earth elements (LREE), depletion in high field strength elements (HFSE) and heavy rare earth elements (HREE), and slightly negative Eu anomalies and are similar to rocks that form in a continental arc setting. These rocks also show large variations in their ε Hf (t) (+4.1 to +9.7) and Mg# (38–69) values, alongside low Ba/Th (4–230) and high Th/Yb (3.77–7.41) and Th/La (0.21–0.71) ratios, suggesting that the granodiorite magma originated from the partial melting of mafic lower crust with a mantle wedge component and involved signals of subduction-zone sediments and fluids. The Husite mafic microgranular enclaves (MMEs) exhibit high Mg# (50–62), MgO (3.25–6.93 wt%) and low SiO 2 (48.8–59.5%) contents, with positive ε Hf (t) from +3.3 to +7.4. The zircon LA-ICP-MS U-Pb ages of the MMEs (373 Ma) indicate nearly coeval formation between the MMEs and HMPs during the Late Devonian. These features with the petrological and mineralogical characteristics (such as needle-like apatite and disequilibrium feldspar xenocrysts) suggest that the Husite MMEs formed from the mixing of felsic magma from the partial melting of mafic lower crust and mafic magma that was derived from mantle wedge, rather than restite, xenoliths or fractional crystallization of magma. Thus, the skarn Fe-Cu mineralization were probably related to hybrid intermediate-acid magma that is characterized by high water and oxygen contents and high sulfur fugacity. It can be inferred that the response to ongoing slab roll-back during the Junggar plate's subduction beneath the Yili Block, including the underplating of mantle-derived mafic magmas from the metasomatism of subduction-zone melts, led to the partial melting of the mafic lower crust to form felsic magma. Then, the continuous reaction between the mafic and felsic magmas further increased the Fe-Cu concentrations and was closely related to the subsequent Fe-Cu mineralization. [ABSTRACT FROM AUTHOR]

The hydrothermal fluids responsible for the Mo mineralization stage were mainly derived from magmatic fluids that were characterized by high salinity and contained more Mo content. The Cu ore-forming fluids were enriched in Cu, As, and volatiles (e.g., CO 2 , HF), and originated from the mixing of magmatic fluids (generated by condensation of the low-salinity vapor after fluid boiling) and meteoric water. [Display omitted] • The Dabate porphyry Cu-Mo deposit is characterized by "early Cu and late Mo, external Cu and internal Mo". • The Cu mineralization fluids were produced by condensation of the vapor phase generated by fluid boiling. • The subtle changes influid feature resulted in the temporal separation of the Cu and Mo mineralization. • The spatial separation of the Cu and Mo mineralization could be attributed to different partitioning behaviors of Cu and Mo during the phase separation. Dabate deposit is a typical porphyry Cu-Mo deposit in the Western Tianshan, Xinjiang, China. Both the Cu and Mo mineralization are mainly associated with intrusion of rhyolite porphyry. Distinguishing from typical porphyry deposits, the Cu mineralization and Mo mineralization are separated from each other on both the temporal and spatial scales. The Cu orebodies are mainly hosted in the contact zone between the rhyolite porphyry and Tuosiku'ertawu Formation and predominantly occur as fluorite-arsenopyrite-Cu-sulfides ± K-feldspar ± quartz veins (Cu-1 stage), whereas the Mo orebodies are mostly hosted in the inner part of the rhyolite porphyry and are typically presented as Mo-2 stage quartz-molybdenite veins (external Cu and internal Mo). Total homogenization temperatures (T h, L-V) for boiling fluid inclusion assemblage of the Mo-2 stage occurred at 302 to 358 °C, with corresponding salinities of 1.4 to 38.1 wt% NaCl eqv. H-O isotope data indicate that the Mo mineralization fluids were mainly derived from magmatic water. The non-boiling fluids of the Cu-1 stage originated from magmatic fluids and meteoric water, which were characterized by high temperature (323 to 379 °C) and low salinity (2.6 to 5.9 wt% NaCl eqv) as well as Cu, As, and volatile enrichment. These features are different from the initial magmatic fluids of this deposit, indicating that the Cu mineralization may occur before the Mo mineralization (early Cu and late Mo) and the magmatic fluid components of the Cu-1 stage should be derived from the condensation of the low-salinity vapor generated by boiling of the hydrothermal fluids (351 to 405 °C; 1.8 to 40.1 wt% NaCl eqv) for the earliest Mo-1 stage barren quartz veins. The positive δ 34S values (5.5 to 9.8‰) of sulfides indicate that the sulfur in the ore-forming fluids was derived from magma and country rocks. The subtle change in fluid conditions from the high temperature (peak range 340 to 360 °C), alkaline, and slightly more oxidized of the Cu-1 stage to high temperature (peak range = 320 to 340 °C), more reduced, and acidic of the Mo-2 stage gave rise to the temporal separation of Cu and Mo mineralization. The Cu, As, and volatiles (e.g., CO 2 , HF), preferentially partitioned into the vapor phase, were highly enriched in Cu ore-forming fluids, whereas Mo mineralization fluids contained the majority of Mo with strong preference for the brine phase. Therefore, the spatial separation of the Cu and Mo mineralization could be attributed to selectively fractionating between the vapor phase and hypersaline liquid of the Cu and Mo metals during the process of fluid boiling. [ABSTRACT FROM AUTHOR]