Search

The objective of the study was to evaluate the effects of dentin deproteinization protocols for post space using different formulations containing sodium hypochlorite before fiber post cementation with self-adhesive resinous cement. The groups were divided according to the irrigation protocol (DWC, SHS, SHT and SHG). The residue cleanliness, bond strength, adhesive failure pattern, and tag formation at the adhesive interface between the self-adhesive cement and the dentin were evaluated. For this, analysis in scanning electron microscope, push-out test and confocal laser scanning microscopy were performed. The SHT protocol showed the highest residue cleanliness on the dentin surface of the post space (p<0.05). In addition, SHT protocol showed highest bond strength and tag formation in the cervical and middle thirds (p<0.05). Dentin deproteinization with sodium hypochlorite with surfactant provided the best dentin cleaning of residues, bond strength and tag formation after cementation of the fiber post with self-adhesive cement.

The aim of this study was to evaluate the effects of cleaning protocols on the presence of residues, open dentinal tubules, and bond strength of a self-etch adhesive plus a dual-cure resin cement to dentin in the fiber-post space. The methods for cleaning utilized were conventional irrigation (CI), rotary brush with continuous rotary movement (RB), and continuous ultrasonic irrigation (CUI). Sixty bovine incisors were used for fiber-post space preparation. Thirty roots were divided into three groups (n = 10) according to the cleaning protocols and submitted to scanning electron microscope to evaluate presence of residues and relative quantity of open dentinal tubules on dentin surface. Similar protocols were performed in the other thirty roots (n = 10) using a self-etching adhesive system (Scotchbond Universal) and a dual-cure resin cement (Relyx Unicem 2). After 6 months cervical, middle, and apical thirds sections of fiber-post space were submitted to push-out testing. To data ANOVA and Tukey's test were employed (α = 5%). RB and CUI showed the lowest presence of residues on dentin surface (p = .015) and the highest bond strength values (p < .001), regardless of the dentin third. CUI presented the highest quantity of open dentinal tubules in middle and apical thirds (p < .001). CI presented the lowest bond strength value of resin cement, regardless of dentin third (p < .001). Mechanical cleaning protocols, such as RB and CUI, presented better surface cleaning capabilities and higher bond strength than CI with dual-cure resin cement employed. The use of a mechanical cleaning protocol seems to cause appropriate condition on the root dentin surface. Mechanical cleaning of root dentin provided greater bond strength of the self-etching system with dual resin cement. Conventional irrigation did not provide adequate root dentin cleaning. RESEARCH HIGHLIGHTS: • The use of a mechanical cleaning protocol seems to cause appropriate condition on the root dentin surface. • Mechanical cleaning of root dentin provided greater bond strength of the self-etching system with dual resin cement. • Conventional irrigation did not provide adequate root dentin cleaning., (© 2022 Wiley Periodicals LLC.)

Background: This study evaluated the effects of final agitation methods of irrigants to remove methylene blue and sodium hypochlorite residues after PDT-assisted endodontic treatment on the bond strength of fiber posts cemented with etch-and-rinse adhesive and conventional resin cement., Methods: Ninety bovine teeth were endodontically treated. In sequence, post space preparation followed by methylene blue-mediated PDT and sodium hypochlorite (NaOCl) irrigation were performed. Six final irrigations protocols for dye and NaOCl removal were performed prior to cementation with etch-and-rinse adhesive (Adper Scocthbond Multipurpose) and conventional dual resin cement (RelyX ARC): Conventional endodontic irrigation (CEI), passive ultrasonic irrigation (PUI), mechanical agitation with XP Endo Finisher (XPF), XP Clean (XPC) or Easy Clean (ECL) and distilled water (NCO - control). After fiber post cementation, push-out bond strength test was performed at different thirds of the post space. Failure mode was also analyzed. ANOVA and Tukey's post-hoc test was used for data analysis (α=5%)., Results: PUI, XPF e XPC protocols showed the highest bond strength values with no difference among them (p > 0.05), although they were similar to NCO, regardless of the post space third. CEI e ECL showed similar bond strength values, regardless of the third (p > 0.05). Adhesive failure was the most incident for CEI and ECL, while mixed and cohesive failures were predominant in PUI, XPF, XPC and NCO groups., Conclusions: Mechanical agitation of distilled water with XPF, XPC and PUI after methylene blue-mediated PDT and irrigation with 2.5% sodium hypochlorite promoted bond strength of the resin cementation system in post space dentin comparable to control group., (Copyright © 2021. Published by Elsevier B.V.)

Objective: This study aimed to evaluate the effect of fiber post customization on the bond strength (24 hours and 6 months), resin cement thickness, and dentinal penetrability of Adper Scotchbond Multi-Purpose - RelyX ARC (AS-RA), RelyX U200 (R2), and Scotchbond Universal - RelyX Ultimate (SU-RU) cementation systems to root dentin from the cervical-, middle-, and apical-thirds of the post space., Methods: One hundred twenty bovine incisors were endodontically treated. After post space preparation, the roots were divided into six groups, according to the luting protocols (AS-RA, R2, SU-RU) and the type of fiber post [noncustomized post (NC) and customized post (C)]. Customization procedures were peformed using a resin composite (Z350 XT). 24 hours (n=60) or 6 months later (n=60), specimens from the cervical-, middle-, and apical-thirds of the post space were submitted to cementation system thickness measurement, bond strength evaluation, and dentinal penetrability analysis with Confocal Laser Scanning Microscopy (CLSM). Failure mode was classified as adhesive, cohesive, or mixed. Data were submitted to ANOVA and Tukey tests (α=0.05)., Results: Cementation protocols with customized fiber posts presented the lowest cementation system thickness, regardless of the cementation system or post space-third (p<0.05), and the highest bond strength values (p<0.05), regardless of the third space (p>0.05), for both periods (24 hours or 6 months). The comparison of push-out bond strength values between 24 hours and 6 months showed a reduction in all groups for the cervical-third (p<0.05). For the middle-third, only noncustomized groups showed reduction (p<0.05). For the apical-third, no reduction was observed (p>0.05)., Conclusions: Anatomical customization favored both the bond strength of cements to dentin and the dentinal penetrability, but with lower cementation system thickness, regardless of cement composition and adhesive strategy., (©Operative Dentistry, 2022.)

Objective: To evaluate the effects of mechanical versus chemical cleaning protocols for cleaning the root dentin surface before cementation of fiberglass posts for their effect on the bond strength, failure mode, and dentinal penetration of the cementing agent using an etch-and-rinse adhesive system on dentin prepared to receive a fiberglass post., Methods: Forty roots of bovine teeth were endodontically treated and prepared for fiber post cementation. The specimens were randomized into 4 groups of 10: Control group (CO) - irrigation with 2.5% NaOCl; DW group- irrigation with distilled water; RB group - rotating brush for cleaning root canals, and CUI group - continuous ultrasonic irrigation. The fiberglass posts were cemented, and the specimens were immersed in distilled water for 6 months. A push-out test was performed on the cervical, middle, and apical thirds of the samples. Dentinal penetration of the cementing agent and the fracture pattern were evaluated by laser confocal microscopy. Statistical analysis was performed using analysis of variance (ANOVA) and post hoc Tukey tests (α=0.05). Results: The RB and CUI groups showed significantly higher bond strength values when compared to the Control and DW groups (p<0.05). In addition, in the control and DW groups, the apical third presented lower bond strength values when compared to middle and cervical thirds., Conclusion: While DW showed the highest incidence of adhesive type failure, CUI resulted in the highest dentinal penetration of the cementing agent (p<0.05). RB and CUI resulted in the highest bond strength between cementation system and root dentin. In addition, CUI favored greater dentinal penetration of fiberglass post cementing agent., (© Operative Dentistry, 2021.)