Search

This paper develops a novel voltage equalizer by combining wireless power transfer (WPT) and a voltage multiplier (VM) for series-connected energy storage cells. The physical isolation achieved by WPT can offer several unique benefits that traditional equalizers can hardly provide. In this paper, the characteristics of a multiple-output VM are analytically discussed and used to develop an equivalent one-output VM model. Based on this model, parameters of the WPT system are properly designed. The proposed design methodology can achieve a single-switch voltage equalizer without feedback control, which dramatically decreases the circuit complexity and cost. Moreover, this methodology can naturally ensure a robust system under small coil misalignment. In the experiment, the proposed system is built to balance four series-connected ultracapacitor modules. The system efficiency is 72.8% at a load power level of 10 W. [ABSTRACT FROM PUBLISHER]

This paper develops a 6.78 MHz multiple-receiver wireless power transfer system driven by a Class E power amplifier. Constant output voltage is achieved for each receiver with optimized overall efficiency. A novel one-receiver model is built to analyze the overall power-efficiency characteristics. The loads and input voltage are then designed as two control variables. Through tuning the loads, constant output voltage is achieved by independent controllers at the receiver side. Then, the efficiency is optimized by tuning the input voltage at the transmitter side. Finally, the theoretical analysis and control scheme are validated using a three-receiver system. It shows that different constant output voltages, 5, 9, and 12 V can be achieved independently for different receivers. When the load resistance, real coupling, and number of receivers change, the voltage can be quickly regulated, and the overall optimum system efficiency is 66.6%. [ABSTRACT FROM AUTHOR]

This paper proposes a new battery cell voltage equalization approach using multiple-receiver wireless power transfer (WPT) working at megahertz (MHz). Compared with existing multiwinding transformer, the MHz multiple-receiver WPT system is advantageous in terms of saved weight and space, ease of implementation, and improved safety. In this paper, the unique operating principle of the WPT-based equalization is first explained, through which equalization currents are naturally determined by the battery cell voltage distribution. The currents are also analytically derived. This facilitates the discussion on power amplifier (PA) design. Performance analysis is then provided to investigate the influences of system parameters on the efficiency and equalization ability of the proposed WPT-based equalization system, and thus guide following design and implementation. Considering the uncertainty in PA load due to the random cell voltage distribution, a current-model Class $E$ PA is designed that enables approximately constant PA output current. Experimental results show that the proposed multiple-receiver WPT-based battery cell equalization system can achieve high overall system efficiency (above 71%) when equalizing six lithium-ion battery cells under loosely coupling ( $k$ = 0.065). A good match between the experimental and calculation results also validates the correctness of the theoretical discussion. [ABSTRACT FROM PUBLISHER]

In this paper, the loading effect of a Class E power amplifier (PA) driven 6.78 megahertz (MHz) wireless power transfer (WPT) system is analyzed at both circuit and system levels. A buck converter is introduced and controlled to track an optimal equivalent load that maximizes the system efficiency under uncertainties in the relative position of coils and the final load. For power control, an additional degree of freedom is provided by adding an ultracapacitor bank. A control strategy is proposed to track the maximum efficiency and charge/discharge the ultracapacitor bank through the on/off control of the Class E PA. Thus, high system efficiency can be maintained under various uncertainties and load power demands. Finally, the theoretical analysis and the control scheme are validated in experiments. The results show that the proposed Class E PA-driven MHz WPT system can stably achieve a high efficiency under different coil distances and various constant/pulsed power profiles. The measured highest system efficiency can reach 72.1% at a load power level of 10 W. [ABSTRACT FROM AUTHOR]