Search

This paper proposes a vector control strategy for LCL-filter-based grid-connected voltage-source converters (VSCs). The proposed control strategy is inherently capable of attenuating the resonance phenomenon of such systems. This is an advantage over the existing methods, which require additional damping techniques. Moreover, the proposed vector control strategy is able to fully decouple the direct (d) and quadrature (q) components of the current in a rotating reference frame. The design procedure comprises a constrained optimization-based loop shaping. It utilizes the multi-input multi-output (MIMO) nonparametric model of the system along with a high-order linearly parameterized MIMO controller to form an open-loop transfer function matrix. Minimizing the second norm of the error between the open-loop transfer function matrix and a desired one, the coefficients of the controller are optimally determined. Conducting several reference tracking scenarios, the performance of the proposed vector controller is evaluated both by means of time-domain simulation studies in MATLAB/Simulink and experimental results. [ABSTRACT FROM AUTHOR]

This paper presents a vector control strategy for regulating the current of grid-tied voltage source converters (VSCs) in a rotating reference frame. The proposed approach is based on shaping the open-loop and closed-loop transfer matrices of the system. Solving a constrained convex optimization problem, the shaping is achieved, which guarantees the stability of the closed-loop system. The designed controller results in the desired dynamic performance and decouples the direct and quadrature (dq) current axes. The structure of the proposed controller is similar to that of its predecessors and consists of four proportional–integral controllers. The performance of the method is evaluated based on simulation and experimental results. It is confirmed that its dynamic performance is better than that of the previously proposed approaches, and it results in the decoupled current axes. [ABSTRACT FROM PUBLISHER]

This paper presents a linear direct–quadrature current control strategy for voltage source converters (VSCs) in a rotating reference frame (RRF). The described method is based on multivariable-proportional–integral (PI) regulators and provides fast dynamics and a zero steady-state error. Contrary to the well-known conventional PI-based control strategies in RRFs, the presented method provides practically decoupled axes with a superior disturbance rejection capability. Moreover, its implementation is relatively simple and does not impose excessive structural complexity compared to its conventional PI-based competitors. The method is applicable to both single- and three-phase systems and also to anisotropic three-phase systems, e.g., synchronous motors with different direct and quadrature impedances driven by VSCs. Implementing a three-phase test system, the performance of the presented method is experimentally evaluated. [ABSTRACT FROM AUTHOR]

This paper analytically determines the nondetection zone (NDZ) of an active islanding detection method, and proposes a solution to obviate the NDZ. The method actively injects a negative-sequence current through the interface voltage-sourced converter (VSC) of a distributed generation (DG) unit, as a disturbance signal for islanding detection. The estimated magnitude of the corresponding negative-sequence voltage at the PCC is used as the islanding detection signal. In this paper, based on a laboratory test system, the performance of the islanding detection method under UL1741 anti-islanding test conditions is evaluated. Then, determining the NDZ of the method and proposing the countermeasure, the existence of the NDZ and the performance of the modified method to eliminate the NDZ is verified based on simulation results in PSCAD/EMTDC software environment and experimental tests. [ABSTRACT FROM AUTHOR]

This paper presents an alternative way for the current regulation of single-phase voltage-source dc–ac converters in direct–quadrature (dq) synchronous reference frames. In a dq reference frame, ac (time varying) quantities appear as dc (time invariant) ones, allowing the controller to be designed the same as dc–dc converters, presenting infinite control gain at the steady-state operating point to achieve zero steady-state error. The common approach is to create a set of imaginary quantities orthogonal to those of the real single-phase system so as to obtain dc quantities by means of a stationary-frame to rotating-frame transformation. The orthogonal imaginary quantities in common approaches are obtained by phase shifting the real components by a quarter of the fundamental period. The introduction of such delay in the system deteriorates the dynamic response, which becomes slower and oscillatory. In the proposed approach of this paper, the orthogonal quantities are generated by an imaginary system called fictive axis, which runs concurrently with the real one. The proposed approach, which is referred to as fictive-axis emulation, effectively improves the poor dynamics of the conventional approaches while not adding excessive complexity to the controller structure. [ABSTRACT FROM PUBLISHER]