Search

This paper proposes a novel single-switch quasi-active power factor correction (PFC) converter based on two flyback dc/dc modules. To achieve a high efficiency, part of the input power is directly transferred to the load by the first dc/dc module. The rest of the input power is stored in the dc-bus capacitor and reprocessed by the second dc/dc module. Together, the dc-bus capacitor and the second dc/dc module also serve as a regenerative snubber. Furthermore, a quasi-active PFC circuit is provided to improve the power factor and to ensure the continuous current mode (CCM) operation of the input inductor without the need for sophisticated feedforward sensing and control mechanism. The quasi-active PFC circuit is driven by a magnetic switch, through the tertiary winding of the transformer of the first flyback module. The input current harmonics of the proposed converter meet the IEC 61000-3-2 (Classes A, C, and D) requirements. The dc-bus capacitor voltage is always less than the input voltage regardless of the load condition and is fairly invariant to large variations of the input voltages. High power factor with CCM operation and fast output voltage regulation have been achieved through a single-loop controller. Operating principles, analysis, and experimental results are presented to verify the effectiveness of the proposed converter. [ABSTRACT FROM PUBLISHER]

This letter presents a novel ac/dc converter based on a quasi-active power factor correction (PFC) scheme. In the proposed circuit, the power factor is improved by using an auxiliary winding coupled to the transformer of a cascade dc/dc flyback converter. The auxiliary winding is placed between the input rectifier and the low-frequency filter capacitor to serve as a magnetic switch to drive an input inductor. Since the dc/dc converter is operated at high-switching frequency, the auxiliary windings produce a high frequency pulsating source such that the input current conduction angle is significantly lengthened and the input current harmonics is reduced. It eliminates the use of active switch and control circuit for PFC, which results in lower cost and higher efficiency. In order to achieve low harmonic content, the input inductor is designed to operate in discontinuous current mode. Operating principles, analysis, and experimental results of the proposed method are presented. [ABSTRACT FROM AUTHOR]