Search

AlN thin films are enabling significant progress in modern optoelectronics, power electronics, and microelectromechanical systems. The various AlN growth methods and conditions lead to different film microstructures. In this report, phonon scattering mechanisms that impact the cross-plane (κz; along the c-axis) and in-plane (κr; parallel to the c-plane) thermal conductivities of AlN thin films prepared by various synthesis techniques are investigated. In contrast to bulk single crystal AlN with an isotropic thermal conductivity of ∼330 W/m K, a strong anisotropy in the thermal conductivity is observed in the thin films. The κz shows a strong film thickness dependence due to phonon-boundary scattering. Electron microscopy reveals the presence of grain boundaries and dislocations that limit the κr. For instance, oriented films prepared by reactive sputtering possess lateral crystalline grain sizes ranging from 20 to 40 nm that significantly lower the κr to ∼30 W/m K. Simulation results suggest that the self-heating in AlN film bulk acoustic resonators can significantly impact the power handling capability of RF filters. A device employing an oriented film as the active piezoelectric layer shows an ∼2.5× higher device peak temperature as compared to a device based on an epitaxial film. [ABSTRACT FROM AUTHOR]

Ultra-wide bandgap β-gallium oxide (Ga2O3) devices are of considerable interest with potential applications in both power electronics and radio frequency devices. However, current Ga2O3 device technologies are limited by the material's low intrinsic electron mobility and thermal conductivity. The former problem can be addressed by employing modulation-doped β-(AlxGa1−x)2O3/Ga2O3 heterostructures in the device architecture. In this work, (AlxGa1−x)2O3/Ga2O3 modulation-doped field effect transistors (MODFETs) have been investigated from a thermal perspective. Thermoreflectance thermal imaging was used to characterize the self-heating of the MODFETs. The (Al0.18Ga0.82)2O3 thermal conductivity (3.1–3.6 W/mK) was determined using a frequency domain thermoreflectance technique. Electro-thermal modeling was used to discern the effect of design parameters such as substrate orientation and channel length on the device self-heating behavior. Various thermal management schemes were evaluated using the electro-thermal device model. From an electro-thermal co-design perspective, the improvement in electrical performance followed by the mitigation of self-heating was also studied. For example, by employing a Ga2O3-on-SiC composite wafer, which was fabricated in this work, a 50% increase in power handling capability can be achieved as compared to a homoepitaxial device. Furthermore, flip-chip heterointegration and double-sided cooling approaches can lead to more than 2× improvement in the power handling capability. Using an augmented double-sided cooling design that includes nanocrystalline diamond passivation, a 5× improvement in the power handling capability can be accomplished, indicating the potential of the technology upon implementation of a suitable thermal management scheme. [ABSTRACT FROM AUTHOR]

Improvements in radio frequency and power electronics can potentially be realized with ultrawide bandgap materials such as aluminum gallium nitride (AlxGa1−xN). Multidimensional thermal characterization of an Al0.30Ga0.70N channel high electron mobility transistor (HEMT) was done using Raman spectroscopy and thermoreflectance thermal imaging to experimentally determine the lateral and vertical steady-state operating temperature profiles. An electrothermal model of the Al0.30Ga0.70N channel HEMT was developed to validate the experimental results and investigate potential device-level thermal management. While the low thermal conductivity of this III-N ternary alloy system results in more device self-heating at room temperature, the temperature insensitive thermal and electrical output characteristics of AlxGa1−xN may open the door for extreme temperature applications. [ABSTRACT FROM AUTHOR]