Search

The complex interactions between renewables and AC/DC networks have brought new oscillation issues. To effectively monitor and suppress these oscillations, the observability and controllability of the oscillatory modes at different locations of the system must be investigated. To achieve this, the paper first defines the concept of modal observability and controllability using the responses of unit-pulse perturbations. Then an eigenvalue-decomposition based method is proposed to calculate these two indexes with the impedance network model (INM) as the input. The obtained modal observability(controllability) has many important applications and one of them is to facilitate the aggregation of the INM. The paper investigates this application by selecting an optimal aggregation port to ensure that the aggregated impedance can reflect the complete system dynamics. Finally, the proposed method is verified on a simple passive circuit and a practical wind power system that experienced actual subsynchronous resonance incidents. Theoretical results as well as EMT simulations demonstrate the effectiveness of the method. [ABSTRACT FROM AUTHOR]

Recently, a high-frequency resonance (HFR) incident has been captured in an actual HVDC project of China Southern Power Grid, which is regarded as a new stability issue caused by the interaction between the modular multilevel converter (MMC) and the weak ac grid. To investigate this event, this paper proposes a stability analysis method based on the frequency-coupling impedance model (FCIM). First, the FCIMs of the MMC and the ac grid are established in abc-frame individually with the frequency coupling effect of the MMC taken into account. Next, they are aggregated into a two-by-two impedance matrix by numerical calculation. Then, based on the aggregated FCIM, a criterion is developed to locate the HFR modes and to evaluate their stability. Finally, the results obtained from FCIM-based analysis are verified by electromagnetic transient (EMT) simulations as well as the field measurements. [ABSTRACT FROM AUTHOR]

The mainstream researches focus on the linearised impedance/admittance model and its related coupling effects or stability problems. However, since various non‐linear components exist in control loops, their non‐linear dynamics shall be described to improve the modelling accuracy. To fill in this gap, this study develops a large‐signal impedance/admittance model (LSIM/LSAM) to describe the dominant non‐linearity of modulation saturation in a grid‐connected voltage‐source converter (VSC). The LSAM represents the non‐linearity with the equivalent saturation gains based on the describing function theory and then incorporates the derived gains into conventional small‐signal AM (SSAM) to obtain a partially non‐linear admittance. The proposed LSAM distinguishes itself from SSAM by reflecting the improvement in the magnitude‐ and phase‐response of admittance during non‐linear oscillations. Case studies on a grid‐connected VSC containing saturation non‐linearity are conducted to validate the model's effectiveness in stability analysis. It is found that the frequency deviation and sustained oscillation caused by non‐linearity, which can hardly be assessed using SSAM, can be well captured by LSAM. The results of parameter analysis verify that the modulation saturation dominates the system non‐linearity. [ABSTRACT FROM AUTHOR]

With the increasing penetration of converter based renewable generators into the modern power systems, subsynchronous control interaction (SSCI) phenomenon is jeopardizing the equipment safety and system stability. For the analysis and prevention, it is critically important to identify the source of such sub/super-synchronous oscillation caused by the SSCI. This article first develops three criteria for determining the SSCI sources based on sub/super-synchronous powers and impedances. One of the criteria takes into account the coupling effects between sub- and super-synchronous frequencies. Then, a general framework for the SSCI source identification is established, which is based on wide-area monitoring of the sub/super-synchronous power flows obtained from measured voltage and current phasors. Finally, the proposed identification criterion and framework are verified on the electromagnetic transient model of the Hami wind power system, which has experienced an actual SSCI incident. The results indicated that the wind farms based on type-4 wind turbine generators were the main sources of oscillation, while nearby thermal power plants were the sinks. [ABSTRACT FROM AUTHOR]

Recently, emerging oscillation issues have been caused by subsynchronous interaction (SSI) between voltage source converters (VSCs) based renewable generators and ac/dc grids. To investigate the dynamics of SSI, several impedance models (IMs) of VSC have been developed in previous studies. They are established in different reference frames and consider the entire or just parts of the control systems. However, it is still an unanswered question whether or not the existing IMs are suitable for SSI analysis and to what extent the IMs with different modeling details affect subsynchronous dynamics. To fill in this gap, this paper, first, reviews the existing IMs of VSC and clarifies their relationship. Then, their frequency characteristics are examined so as to select the proper models for the studies of sub-/supersynchronous and high-frequency dynamics. Next, both zero-pole and IM-based SSI analyses are carried out on a simplified system and a real-world wind-farm system that suffered actual SSI incidents. The results indicate that the outer-loop control has a significant impact on the subsynchronous dynamics, and only those IMs taking full-scale controls and frequency-coupling effects into account can reflect SSI accurately. Finally, both modal analysis and electromagnetic transient simulations have been conducted to verify the theoretical results. [ABSTRACT FROM AUTHOR]

Unstable subsynchronous control interaction (SSCI) between wind farms (WFs) and series-compensated grid has posed a big threat to the safety of equipment and the stability of system. Many studies have been conducted on its analysis and control. However, very little research has been done on the protection. To fill the gap, this paper proposes a system-wide protection against unstable SSCI in wind power systems with fixed series compensations. The protection is composed of a centralized protection coordinator (CPC) and several distributed protection relays (DPRs). Local DPRs measure the subsynchronous impedances of WFs in real time. These impedances are next collected by the CPC to calculate the sensitivities of tripping for each WF. The sensitivities are then used to determine the candidate WFs and the number of WTGs to trip at those WFs, so as to stabilize the SSCI. The effectiveness of the proposed protection is verified with detailed electromagnetic simulations on a wind power system that had experienced actual SSCI incidents. [ABSTRACT FROM AUTHOR]

With the increasing integration of power electronic converters into the power system, the interactions between converters and their adjacent transmissions bring emerging oscillation issues. A new type of sub- and super-synchronous interactions (S $^2$ SI) between STATCOMs and the weak AC/DC grid were detected in China Southern Grid. As an oscillation incident never reported before, as far as the authors know, its characteristics were quite different from the previous ones. Field measurements as well as simulation studies have revealed that the various factors contributing to the S $^2$ SI include the number of online STATCOMs, the strength of the AC system (in terms of effective short-circuit ratio), the status of series compensation, and the loading level of the HVDC. The mechanism of such oscillation has been clarified and it is caused by the S $^2$ SI between STATCOMs and weak AC grids, where sub- and super-synchronous components are involved in a coupled way. To fully represent such a coupling effect, the concept of sub- and super-synchronous coupled impedance model (IM), or S $^2$ SC-IM, is proposed and developed in order to establish a stability criterion for the S $^2$ SI. Based on the IM-based method as well as the time-domain simulations, the impacts on S $^2$ SI from the various factors are quantitatively analyzed. The results show good consistence among theoretical analysis, electromagnetic simulations, and field measurements. Therefore, the effectiveness of the developed models and the stability criterion has been well verified. [ABSTRACT FROM AUTHOR]

Recent years have witnessed emerging oscillatory stability issues in power systems with high-penetration renewables. These issues are generally caused by the dynamic interaction between the AC/DC grid and power electronic converters used for the integration of renewables. Some previous studies have explored the issues with simplified system models containing only a few converters and idealized networks. However, the interactions between many converters and traditional generators/HVDCs have not been fully considered. To fill this gap, this paper first presents the concept of a unified dq frame impedance network model (INM), with which different converters as well as traditional generators/HVDCs can be incorporated to form an integrated s-domain model of a practical system. As the INM is aggregated into a lumped impedance matrix, a new criterion is then proposed to quantify the oscillatory stability, just by analyzing the frequency characteristics of the determinant of the matrix. Finally, the modeling method and the stability criterion are applied to a real-world system with a very high share of renewables and a realistic risk of oscillatory instability. Their effectiveness has been validated by both field measurements and electromagnetic transient simulations. [ABSTRACT FROM PUBLISHER]

Recently, an emerging subsynchronous resonance (SSR) issue was observed in series-compensated systems comprising multiple wind farms. However, only simplified single-machine-infinite-bus system models were adopted to investigate the characteristics of this issue in the previous work. As a result, it is unable to reflect the impact on SSR from some critical factors, such as the network topology, the spatial distribution of wind farms, the diversity of wind turbine generators, and the distributed wind speed. To fill in this gap, this paper proposes an impedance network model (INM) based SSR stability analysis method. The impedance models of each wind farm and transmission line are established, and then interconnected according to system topology to form the whole INM. Such INM is further aggregated into lumped impedance. By analyzing the impedance-frequency features of the latter, a new stability criterion is developed to quantify the stability of SSR. The application of the criterion is demonstrated on a practical power system containing multiple wind farms. Both field measurements and time-domain simulations have been presented to validate its effectiveness and accuracy. The proposed method is of great potential in analyzing the SSR issue for very large-scale wind power systems. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel multirate co-simulation method to improve simulation efficiency of large-scale AC plus multiterminal DC (MTDC) grids. In this method, the whole system is partitioned into different AC and MTDC subsystems. They each are simulated with different time steps according to their requirements of accuracy. Unlike the existing methods where simplified models are adopted, the proposed approach fully reserves both the detailed behavior of converters and the nonlinear dynamics of large-scale AC systems. To realize the coordination between different subsystems, updating and discretization of the interface models are significant to guarantee the overall numerical accuracy and stability of the co-simulation method. Accordingly, the interface models of the partitioned AC and DC networks are represented by time-varying Thevenin and Norton equivalents. To eliminate the aliasing or time-delay errors, their parameters are derived using moving-window prediction, stepwise correction, and averaging techniques. A numerical oscillation suppression algorithm is developed for the discretization of the interface model. Thus, numerical stability is well guaranteed. The variables inside each subsystem as well as the interfaces, which are derived by augmented network equations (ANEs), are calculated simultaneously. The rate ratio of large AC and MTDC systems is determined based on our proposed criterion of electromagnetic transient simulation accuracy. The effectiveness of the cosimulation method is validated on a practical system integrating large AC and modular-multilevel-converter-based MTDC grids. [ABSTRACT FROM AUTHOR]

The dynamics of load, especially induction motors, are the driving force for short-term voltage stability (STVS) problems. In this paper, the equivalent rotation speed of motors is identified online and its recovery time is estimated next to realize an emergency-demand-response (EDR) based under speed load shedding (USLS) scheme to improve STVS. The proposed scheme consists of an EDR program and two regular stages (RSs). In the EDR program, contracted load is used as a fast-response resource rather than the last defense. The estimated recovery time (ERT) is used as the triggering signal for the EDR program. In the RSs, the amount of load to be shed at each bus is determined according to the assigned weights based on ERTs. Case studies on a practical power system in China Southern Power Grid have validated the performance of the proposed USLS scheme under various contingency scenarios. The utilization of EDR resources and the adaptive distribution of shedding amount in RSs guarantee faster voltage recovery. Therefore, USLS offers a new and more effective approach compared with existing under voltage load shedding to improve STVS. [ABSTRACT FROM PUBLISHER]

A new type of subsynchronous resonance (SSR), namely, subsynchronous control interaction (SSCI), was recently observed in doubly-fed induction generators (DFIGs) interfaced with series-compensated power networks. In this paper, a more accurate method based on aggregated RLC circuit model is proposed to intuitively explain and quantitatively evaluate this type of SSR. For a practical power system containing multiple DFIGs and fixed series compensation, an improved impedance model (IM) is derived, which incorporates DFIG's full-scale control system. Around the series-resonant frequency, IM can be further represented with an aggregated RLC circuit model. Its equivalent parameters are worked out and then used for the quantitative assessment of potential SSR risk. The proposed method is applied for SSR analysis of a practical wind farm system in North China that experienced actual SSR incidents. The consistence between the obtained results and field measured data verifies its effectiveness very well. Further, its advantage in accuracy over existing impedance-based approaches is validated by both eigenvalue analysis and time-domain simulations. The method is also used to quantitatively investigate the impact on SSR stability from the various factors, including wind speed, number of online DFIGs and their control parameters. [ABSTRACT FROM AUTHOR]

To make better use of local generators' dynamic var reserve to improve short-term voltage stability (STVS), this paper proposes an integrated high side var-voltage control (IHSV^2C) for power plants in receiving-end power systems. The IHSV^2C consists of a plant-level multi-machine var coordinator (MMVC) and several unit-level high side voltage controllers (HSVCs). MMVC coordinates the reactive power output among generators and provides control parameters for HSVCs, while HSVCs can maintain the voltage of a pre-defined voltage control point (VCP) by regulating the voltage reference of the excitation control of each generator. Therefore, when the system suffers a serious fault, IHSV^2C can drive the generators to provide stronger var support. Consequently, the voltage stability can be improved. A conceptual model of the receiving-end power system in China Southern Power Grid (CSG) is established, and the IHSV^2C has been validated through a simulation analysis on the system. Both time-domain simulation results and the voltage sag severity index (VSSI) have fully demonstrated its performance. Therefore IHSV^2C offers a new and effective approach to improve STVS of receiving-end power systems. [ABSTRACT FROM AUTHOR]

The subsynchronous resonance (SSR) problem may become more serious with the continuous evolvement of a series-compensated power system. Consequently, the existing SSR mitigation scheme might no longer keep the system stable. This issue has been encountered by Shangdu Power Plant, where the deployed supplementary excitation damping controllers (SEDCs) that well stabilized the system before cannot maintain torsional stability after the recent change occurred in the power system. Therefore, a combined mitigation scheme of SEDC and generator terminal subsynchronous damping controller (GTSDC) is proposed in this paper to regain system stability. SEDC provides electrical damping by modulating the excitation voltage at the rotor side. Meanwhile, GTSDC can damp SSR via injecting super-synchronous and subsynchronous currents into the generator stator. Field tests have proven the effectiveness of this combined scheme in addressing the deteriorated SSR issue. Eigenvalue analysis indicates that the combined scheme can provide enough positive damping for the system under any operating condition. Thanks to the low investment of SEDC and the flexibility of GTSDC, this combined scheme provides an economical and scalable solution for SSR mitigation, especially when the target system changes constantly. [ABSTRACT FROM AUTHOR]

Practical subsynchronous instability events have been observed in doubly fed induction generator‐based wind farms, which are radially connected to fixed series compensated transmission lines. As a special type of subsynchronous resonance, this phenomenon is described here as subsynchronous control interaction (SSCI). This study proposes a centralised SSCI mitigation scheme named as subsynchronous damper (SSD). In this scheme, an additional high‐power electronic voltage‐sourced converter is added to the collection bus of wind farms. It is designed to dissipate the electrical resonance power of SSCI. Thus, SSD provides positive damping for SSCI. Its basic principle is explained with equivalent electric circuit and the sufficient conditions for stabilisation are obtained mathematically. Controller design guidelines are given and have been verified first by eigenvalue analysis. Then a method to choose the capacity of power electronic converter is proposed. The effectiveness of SSD is finally demonstrated by extensive time‐domain simulations on a target system. [ABSTRACT FROM AUTHOR]

Torsional damping controllers, such as supplementary excitation damping controllers (SEDCs), are widely used to stabilise subsynchronous resonance (SSR) induced by torsional interactions (TIs) between turbo‐generators and series‐compensated power systems. However, because of the changeable operating situations of a power system, it is a great challenge to design them to guarantee torsional stability under all possible operating conditions. This study proposes a global optimal control‐design procedure for tuning SEDCs to accommodate the variation of system conditions. Considering TI is a small‐signal stability issue, the non‐linear power system is converted into a family of linear parameter varying models and the parameter‐tuning task for multiple SEDCs is formulated into a multi‐model constrained non‐linear optimisation problem. A global optimisation procedure based on genetic algorithm and simulated annealing is designed to efficiently solve this problem and obtain a set of robust or several sets of gain‐scheduling SEDCs. The proposed method is applied to a multi‐machine series‐compensated power system. The results of both eigenvalue analysis and time‐domain simulation have fully demonstrated the effectiveness of the optimised SEDCs in stabilising SSR under all possible operating conditions. [ABSTRACT FROM AUTHOR]

Subsynchronous resonance (SSR) was observed in wind farms located in North China. These wind farms prevailingly consist of doubly-fed induction generators (DFIGs) and are connected to series-compensated transmission lines. The observed resonant frequency is about 6 \sim 8 Hz, which is much lower than that of the reported SSR occurred in Texas. The frequency varies during the occurrence and this phenomenon is observed for the first time. The output power is usually within a certain range, when SSR occurs. Based on the practical system, an equivalent simulation system has been established, in which wind farms are modeled as many identical low rating DFIGs. Then, the SSR event is reproduced by simulations. Analysis results indicate that SSR happens even when the equivalent transmission system compensation level seen from wind farms is only 6.67%. Eigenvalue analysis shows that this phenomenon is an electrical resonance, and could be affected considerably by wind speed, number and control of DFIGs. The number of in-service DFIGs has a nonlinear impact on the damping of SSR. An equivalent electric circuit is deduced to intuitively explain why SSR happens and how the above factors affect it. Considering its features, this phenomenon is recognized as DFIG control participated induction generator effect. [ABSTRACT FROM AUTHOR]

Supplementary excitation damping controller (SEDC) has been widely acknowledged as one of the effective measures to stabilize subsynchronous resonance (SSR). However, how to quantify its stabilizing ability is still an open issue raising widespread concerns. There are few in-depth studies or conclusions in this aspect yet. This paper presents a quantitative measure of SEDC's ability to damp SSR, namely stabilizing ability index (SAI). It is defined as the percentage margin of the effective gain relative to the critical stability gain (CSG). The CSG is the minimum gain of SEDC to guarantee SSR stability, while the effective gain is the control gain of SEDC actually functioning following system disturbances. A practical system is used to investigate the various factors determining the effective gain, the CSG and thus the SAI, based on eigenvalue analysis as well as time-domain simulation. The dominant factors identified include: the total equivalent series-compensation degree of system, the parameters and operating status of the generator, the response time and ceiling voltage of the exciter, and the severity of the disturbance. Why and how these factors affect the control capability of SEDC is examined and thus a practical method is offered for the assessment of SEDC's ability to stabilize SSR. [ABSTRACT FROM AUTHOR]

Blocking filters (BFs) were designed to solve subsynchronous resonance (SSR) problems induced by fixed series capacitors (FSCs) of the Tuoketuo transmission system. However, during the commission of BF, unstable self excitation (SE) occurred unexpectedly, resulting in suspension of the project. This paper first analyzes the mechanism of how BF causes SE. Then, the parameters' sensitivity is investigated and the quality factor (Q) of BF reactors is discovered to have opposite impact on SE and torsional interaction (TI). Thus, by appropriately lowering Q of BF reactors with supplemental resistors, an improved BF scheme is put forward to simultaneously mitigate the different types of SSR problems. As a key issue, the determination of supplemental resistors is formulated into a multi-objective optimization problem, which is then effectively solved with our proposed searching method. Finally, the effectiveness of improved BFs is verified with field tests. For the first time, actual measurements of filed tests on BFs are offered. What is more, their comparison with model studies demonstrates a good agreement. This work paves the way for putting both BFs and FSCs into service, thereby ensuring safe operation and transfer-capability enhancement of the system. [ABSTRACT FROM PUBLISHER]

In this paper, an approximate aggregated impedance model (AAIM) of a grid-connected wind farm with multiple wind turbine generators (WTGs) for the small-signal stability study is derived. The derivation is conducted under the condition that the WTGs inside the wind farm are of the same type and from the same manufacturer. The AAIM derived can be seen as the impedance model (IM) of a grid-connected aggregated WTG. The IM of the aggregated WTG is the weighted average of the IMs of the individual WTGs in the wind farm and hence is simple to be built. The reactance of the line connecting the aggregated WTG to the external AC grid is the maximum eigenvalue of the network reactance matrix of the grid-connected wind farm. In addition, the derivation justifies the representation of a wind farm by an aggregated WTG in the IM-based small-signal stability analysis. Finally, two example grid-connected wind farms are used to evaluate and demonstrate the effectiveness of the AAIM proposed in the small-signal stability analysis. It is also shown that the computational burden of the stability analysis of a large-scale wind farm could be effectively reduced when the AAIM is used. [ABSTRACT FROM AUTHOR]

Saturation nonlinearities caused by control limiters will be activated during large disturbances, complicating the stability of grid-tied voltage source converters (VSCs). This letter investigates the large-disturbance synchronization stability of the grid-tied VSC considering two typical control limiters, i.e., the hard limiter of the reference current and the circular limiter used to avoid overmodulation. A unified differential equation (UDE) model is proposed to quantify the transient responses and stability boundaries of the system under different saturation conditions. It is revealed that the VSC behaves as a current source when the hard limiter is activated; while the interaction between the two limiters drives the VSC to work as a voltage source, making it immune to synchronization instability. [ABSTRACT FROM AUTHOR]

Most of the existing stability analysis methods are capable of determining the oscillatory stability of black-box converter interfaced generators (CIGs) under given operating conditions only but can hardly identify the critical operating conditions. In this letter, an oscillatory stability region (OSR) is defined with the short-circuit ratio and output power as variables, and a method to obtain the OSR for the black-box CIG is proposed. First, the CIG is modeled as a variable-operating-point impedance model (VOPIM) through perturbation tests. Then, the critical operating points, for which the CIG system has a zero-damping oscillation mode, are determined by VOPIM-based oscillatory stability analysis so as to obtain the OSR. Finally, the accuracy of the OSR is verified through control hardware-in-the-loop tests. The OSR is of significant meaning for the control strategy and operation plan optimization of the CIGs. [ABSTRACT FROM AUTHOR]

The interactions between permanent magnet synchronous generators (PMSGs) and weak grids may cause negatively damped or growing subsynchronous oscillation (SSO). The growing-SSO would evolve into a sustained-SSO when it is predominantly governed by the nonlinearities in the PMSG's converter control, such as current limiter. Most of the existing frequency-domain modeling and stability analysis methods are in the small-signal sense and thus unable to consider the impact of such nonlinearities. Besides, these methods can hardly give vital information to characterize the sustained-SSO, for instance, the magnitude. This paper presents a detailed characteristic analysis of the sustained-SSO while accounting for the effect of current limiter nonlinearity. First, a single-input-single-output (SISO) frequency-domain model of the PMSG is developed. This SISO model comprises the transfer functions of outer-/inner-loop controls and phase-locked loop (PLL). The nonlinear part, i.e., current limiter, is incorporated into the model using the describing function (DF) method. Then, the equivalent transformation on the system's closed-loop characteristic equation is used to separate the SISO model into independent linear and nonlinear parts. This separation enables the use of the DF-based Nyquist criterion for evaluating the system stability and determining oscillation attributes, such as the magnitude and frequency. Both the analytic results and time-domain simulations reveal that the current limiter has a significant impact on the characteristics of the sustained-SSO. [ABSTRACT FROM AUTHOR]

This paper analytically examines how the condition of weak grid connection affects the torsional sub-synchronous oscillations (SSOs) induced by a grid-connected DFIG in a power system. The examination focuses on the SSO mode of grid-connected DFIG, which is dominated by the phase locked loop (PLL) or DC voltage control. Theoretical analysis is carried out to prove that the condition of weak grid connection amplifies the impact of modal resonance between the DFIG and torsional dynamics of synchronous generators. The amplifying effect of weak grid connection exhibits as the decrease of damping of SSO mode of DFIG and increase of the associated residue when the grid connection weakens. Consequently, the DFIG is more likely to induce torsional SSOs under the condition of weak grid connection, leading to system instability in the worst case. Analytical examination presented in the paper reveals the mechanism about how the condition of weak grid connection plays a key role for the DFIG to induce the torsional SSOs. An example multi-machine power system with the grid-connected DFIG is presented. Results of modal analysis and non-linear simulation using detailed model of DFIG validate the analysis and conclusions made in the paper. [ABSTRACT FROM AUTHOR]

This paper proposes a novel bipolar modular multilevel converter (MMC) topology with dc fault ride-through capability. The proposed bipolar MMC topology is a hybrid of two types of arms: the half-bridge submodule (HBSM)-based arms (HBSM-arms) which are connected to the ground pole, and the unipolar-voltage full-bridge submodule (UFBSM)-based arms (UFBSM-arms) which are connected to the positive or negative pole. During a pole-to-ground or pole-to-pole dc fault, the hybrid-arm design offers the proposed UFBSM-based hybrid-arm bipolar MMC (UHA-BMMC) the capability to provide additional reactive power to support the ac grid while blocking the dc fault current. The topology, operation principle, dc fault mechanisms, and dc fault ride-through scheme of the UHAB-MMC are presented in this paper. Compared with other possible bipolar MMC topologies, the UHA-BMMC provides good dc fault ride-through capability with a small cost of power-electronic devices. The validity and features of the proposed UHA-BMMC are verified by simulation results conducted in PSCAD/EMTDC. [ABSTRACT FROM PUBLISHER]

This paper concerns with the emerging power system stability issues, classification, and research prospects under a high share of renewables and power electronics. The decades-old traditional power system is undergoing a fast transition with two most prominent features: 1) high-penetration of renewable power generators, utilizing intermittent renewable sources such as wind and solar, and 2) high-penetration of power electronic devices in the generation e.g., wind turbine converters and solar power inverters, transmission e.g., flexible ac or dc transmission system converters, and distribution/utilization systems e.g., electric vehicle and microgrid. The development of modern power systems with dual high-penetrations, i.e., high-penetrations of renewables and power electronic devices, influences the power system dynamics significantly and causes new stability issues. This paper first overviews equipment-level features and system-level stability challenges introduced under the dual high-penetration scenario of the modern power system. Next, the impacts of emerging stability challenges on various aspects of the classical stability issues and classifications are highlighted. Under this context, this paper discusses the validity and limitations of the existing classical and extended power system stability classifications proposed by different IEEE/Cigre Working Groups. Furthermore, a new power system stability classification framework is proposed, which not only maintains the inherent logic of the classical classification but also provides wide coverage and future adaptability of the emerging stability issues. Finally, various classification-oriented research prospects in the power system stability domain are highlighted. • Discussion on the device- and system-level features of power systems with dual high-penetrations. • Emerging stability issues due to dual high-penetrations and their impact on stability classifications. • A critical review of existing classical and extended power system stability classifications of 2004 and 2020. • Highlighting the classification-oriented future research directions. [ABSTRACT FROM AUTHOR]