Search

• SACOS-PLATE: Enhanced code for plate fuel analysis. • Validated against RA-6, Bettis experiments. • Unique heat conduction, flow models. Over the past few decades, plate-type fuel elements have been widely used in advanced research reactors, small modular pressurized water reactors, production reactors, etc., with the advantages of compact structure arrangement, good heat transfer characteristics and high fuel consumption. Currently, a thermal–hydraulic subchannel analysis code, namely SACOS-PLATE code, was newly designed to satisfy the calculation of different types of plate fuel elements under various steady-state operating conditions. Based on the original SACOS code, this updated version modifies the flow distribution model, the plate heat conduction model, the heat distribution model as well as the flow heat transfer model, and then realizes the simulation of the special thermal–hydraulic phenomena of the fuel plate and the rectangular flow channel. In this present study, the RA-6 and Bettis experimental data was used to validate the code, and the simulation calculation was performed on the JRR-3 research reactor, which effectively proved the good computing capability of SACOS-PLATE code. [ABSTRACT FROM AUTHOR]

• The oxidation kinetics models of ATF claddings were incorporated into RELAP5. • Safety analysis of PWR loaded with ATFs was carried out during LOCA. • Optimization schemes of ECCS were proposed based on the performance of ATFs. Based on the excellent performance of accident-tolerant fuels (ATFs), the optimization schemes for the safety system of Chinese advanced three-loop pressurized water reactor during loss of coolant accident (LOCA) were proposed and corresponding feasibility analysis was carried out in this study. The modified system analysis code was used to safety evaluation and four ATF systems were investigated. Several modifications were made to the rod geometries in partial ATF systems to make up the poor neutron economic performance of FeCrAl and Mo MAX. The emergency core cooling system (ECCS) was optimized during LOCA with different break sizes. The results show that it is feasible for all ATF systems to cancel the high pressure safety injection (HPSI) or cancel both HPSI and low pressure safety injection (LPSI) but add an extra accumulator (ACC). Also the safety of reactors fueled with ATFs can be guaranteed with only 0.35 times the original flowrate of LPSI during large break LOCA (LB-LOCA). In the scheme of replacing the original ECCS with two extra ACCs during LB-LOCA, reactors loaded with partial ATFs are safe, while UO 2 -Zr systems are in danger as a contrast. This work could provide reference for the design of reactor safety system in the future. [ABSTRACT FROM AUTHOR]

As one of the Accident Tolerant Fuels (ATFs), Fully Ceramic Microencapsulated (FCM) presents advantageous safety performance in the severe accidents compared with UO 2 owing to its high melting point, superior heat transfer ability and proliferation resistance capability. In this study, preliminary neutronic and thermal-hydraulic analysis of Chinese improved three-loop Pressurized Water Reactor (PWR) with FCM pellet and SiC cladding (FCM-SiC) were conducted to demonstrate the fuel performance of ATFs. First, a three dimensional full core model loaded with FCM-SiC was developed to acquire the cycle length, power distribution and isotopic inventories. And low reactor power and high fuel enrichment were used to satisfy the annual reload requirement. Then, the reactor thermal-hydraulic safety evaluation was carried out by the modified subchannel and system analysis codes, which depicts lower Fuel Centerline Temperature (FCT) and Peak Cladding Temperature (PCT) in FCM-SiC reactor compared to the reactor with traditional fuels. The Minimum Departure from Nucleate Boiling Ratio (MDNBR) of cladding is much higher than the criterion of 1.3 as well. Furthermore, the reactor safety system was simplified and optimized by taking full advantage of the preponderance of ATFs, and the results show that the reactor of FCM-SiC can operate safely with only 10% initial flowrate of Low Pressure Safety Injection (LPSI) or without Accumulators (ACCs) during Large Break Loss of Coolant Accident (LBLOCA), while the conventional zircaloy is failed under the same conditions. This work could provide guidelines for the optimized design of the reactor safety system in the future. • A 3D full core model loaded with FCM-SiC was developed for neutronic analysis. • Thermal-hydraulic evaluation was conducted by modified subchannel analysis code. • Safety assessment during LBLOCA was carried out by modified system analysis code. • Reactor safety system was optimized with the help of ATFs' preponderance. [ABSTRACT FROM AUTHOR]