Search

A highly stable bimetallic-sites catalyst of Ni-Zn anchored in the silicalite-1 zeolite framework is facilely fabricated by ligand-protected strategy, synergistically boosting propane dehydrogenation to propylene. [Display omitted] • Bimetallic Ni-Zn site anchored in the silicalite-1 zeolitic framework are fabricated. • Superior catalytic performance on the 0.2Ni0.06Zn-S-1 for PDH is achieved. • High stability and activity of catalyst are remained after regeneration for 4 cycles. • Synergistic effect between Ni-Zn sites favors propylene desorption to reduce coke deposition. Propane dehydrogenation (PDH) is a prospective benign process for the production of propylene, but generally depends on high-price Pt and toxic Cr(VI) catalysts that often suffer from the rapid deactivation derived from metal sintering and severe coke deposition. To overcome these problems, the breakthroughs in an alternative catalyst design with efficient, low-cost and eco-friendly play a crucial role in successfully developing this process. Here, we facilely fabricate the bimetallic-site catalyst of Ni-Zn anchored in the zeolitic framework of silicalite-1 (depicted as NiZn-S-1) by employing ligand-protected strategy, which performs high temperature stability. Under comparable conditions, the NiZn-S-1 catalyst with high Ni/Zn molar ratio of 3:1 (named 0.2Ni0.06Zn-S-1) exhibits superior catalytic activity (initial propane conversion of 32.5 % and actual TOF propane of 28.5 min−1) with low deactivation rate (0.0778 h−1) and great propylene selectivity (>90%) after 30 h on stream. In particular, the catalytic performance on this catalyst almost keeps same as that of fresh catalyst after 4 successive oxidation–reduction cycles. Multiple characterizations further demonstrate that the enhancement of PDH performance ought to be attributed to the synergistic effect between bimetallic Ni-Zn sites, which favors the selective activation of C–H bond and propylene desorption to reduce the formation of coke species with high graphitization degree, boosting the improvement of catalyst stability. The design of novel bimetallic-sites catalyst can give a new idea on the development of alternative PDH catalysts with economical- and environment-friendly in the future. [ABSTRACT FROM AUTHOR]

Three zeolites ZSM-5, ZSM-35 and ZSM-22 are applied in n -butane cracking to reveal the influence of regional differences in Brønsted acid sites on reaction pathways. The Brønsted acid sites located in the channels of ZSM-5 exhibit a higher catalytic activity and yields to light olefins (especially the ethylene), which can be attributed to more relative contribution of bimolecular pathway. In comparison, more Brønsted acid sites are situated on the external surface or micropore mouths of ZSM-35 and ZSM-22, which are beneficial to propylene production. Note-worthily, almost no propane production on the two zeolites implies the predomination of monomolecular pathway. In situ FTIR technique further discloses that the difference in the reaction pathways is tailored by adsorption configurations of n -butane at two types of Brønsted acid sites. Under comparable conditions, the ZSM-5 performs a relatively good catalytic stability through bimolecular pathway. Furthermore, the correlation between deactivation rate and light olefins reveals that the enhancement of propylene selectivity accelerates the deactivation of ZSM-35 and ZSM-22. While, promotion on the ethylene selectivity is a significant inducement for the deactivation of ZSM-5. Reaction pathways of n-butane cracking tailored by the influence of regional differences in Brønsted acid sites. [Display omitted] • Three typical 10-member ring zeolites ZSM-5, ZSM-35 and ZSM-22 are prepared. • Reaction pathways of n -butane cracking over the zeolites are investigated. • Regional differences in Brønsted acid sites tailor the selectivities to propylene and ethylene. • ZSM-5 zeolite exhibits high catalytic activity and stability compared to ZSM-35 and ZSM-22. • Catalyst deactivation mechanisms are revealed on different reaction pathways. [ABSTRACT FROM AUTHOR]