Search

Microgrid is a distribution system composed of a set of micro-generators which are added to a network. One serious challenge facing a microgrid network is designing a proper protection scheme. This is because the fault current in a microgrid is constantly changing due to the presence of distributed generation (DG) resources at all levels of the distribution network and to the fact that they can operate in two islanding and normal modes. This makes the conventional methods inappropriate for microgrid protection. That is, new schemes should be developed for this purpose. This paper is a summary of studies recently carried out in the field of microgrid protection. Along this line, the structure and topology of microgrids are reviewed first. Afterwards, the protective challenges facing DG-equipped distribution networks are discussed. Then, the innovative methods proposed to solve these problems are analyzed. These methods can be divided up into six main categories: changing settings of protective devices at presence of DG units, disconnecting pertinent DG units when faults occur, creating a balance among different DG technologies, using fault current limiter, using smart transformers, and adaptive protection. In so doing, we consider the factors involved in selecting each method. The factors identified are microgrid type and topology, DG type, communication type and delay time, method of fault detection and analysis, relay type, fault type, method of grounding, and use of smart transformers in microgrid. It is hoped that this work will be useful to the researchers in the field of microgrid protection in finding relevant references and designing appropriate methods. [ABSTRACT FROM AUTHOR]

In interconnected networks, it is impossible to satisfy all coordination constraints. Some methods have been proposed in the literature to determine the minimum break point set (MBPS) before the coordination procedure. In this paper, a new method is presented which coordinates overcurrent relays and simultaneously determines minimum unsatisfied constraints as broken constraints (BCs). For the implementation of this method, a new objective function (OF) is defined that also includes constraints with various weightings. These weightings determine the priority of constraints for being satisfied which are obtained by means of some expert rules. The expert rules of previous papers are modified and weighted to determine the priority of constraints. The genetic algorithm is used to optimize the OF that has an internal feedback for determining the minimum BCs considering coordination criterion. The effectiveness of the proposed technique is demonstrated by comparing the results of two sample networks with those obtained by using the recently developed techniques. [ABSTRACT FROM AUTHOR]

Abstract: Interconnected power systems are multi-loop structured. In such networks, the determination of settings for all overcurrent relays can be carried out in different forms and may be quite complicated. The main problem for coordination is the determination of starting points, i.e. the location of starting relays in the procedure for settings, which is referred to as break points. In this paper, a powerful approach based on expert system is applied. The rules of the expert system include network configuration, protection systems, fault levels, etc. The method is applied to two networks with different configurations, pilot protection and other protection systems. From the obtained results, it is reviled that the new method is efficient, accurate, comprehensive and more optimal than the previously used graph theory. [Copyright &y& Elsevier]