Search

Capillary electrophoresis (CE), a commonly used liquid-phase separation technology, has many advantages such as high analysis speed, high separation efficiency, and low sample consumption. Hence, CE has gained popularity in food analysis, medical clinical diagnosis, environmental monitoring, and biological sample separation, especially in the field of protein separation and analysis. However, the fused silica capillaries that are commonly used in CE easily adsorb proteins, resulting in unstable electroosmotic flow and poor reproducibility of the separation results. In addition, due to the short optical path of the typical ultraviolet detectors employed in commercial CE, the detection sensitivity often does not meet the requirements for the direct analysis of low-abundance proteins. Therefore, developing a coating that can prevent protein adsorption and improve detection sensitivity is one of the important challenges in CE separation and analysis of proteins. Poly(2-methyl-2-oxazoline), a peptide-like hydrophilic polymer, not only has hydrophilicity, protein-repellent ability, and biocompatibility similar to the gold standard of the anti-protein adsorption polymer (polyethylene glycol), but also shows better stability than polyethylene glycol due to its peptide-like structure. Therefore, it has been increasingly used in biomass transfer, drug carrier, and impedance protein adsorption in recent years. This article aims to review the recent applications of poly(2-methyl-2-oxazoline) in CE from two standpoints. First, poly(2-methyl-2-oxazoline) was grafted onto the capillary inner wall using polydopamine as an anchor. The resulting coated capillary successfully separated a mixture of proteins (such as lysozyme, cytochrome C, ribonuclease A, and α -pancreas chymosinogen A), in addition to preventing the non-specific adsorption of other proteins during the quantitative analysis of melamine and lactoferrin in milk powder. Thus, the detection efficiency of melamine and lactoferrin in milk powder was improved. Second, poly(2-methyl-2-oxazoline) was used to produce a binary mixed brush coating with a stimulus-responsive polymer (such as polyacrylic acid). The capillary coated with the mixed brushes could adsorb high amounts of the target protein (such as bovine serum albumin and lysozyme) under certain pH and ionic strength conditions, and most of the adsorbed proteins could be desorbed by changing the pH and ionic strength. During the release, poly(2-methyl-2-oxazoline) present on the coating would prevent the adsorption of proteins. Under the dual effects of electroosmotic flow and electrophoresis, the released protein could migrate rapidly, and the instantaneous concentration of the protein reaching the detector could be greatly increased. Therefore, the target proteins could be on-line concentrated and the detection signals could be amplified, resulting in improved detection sensitivity for the protein. Future development trends in the function of poly(2-methyl-2-oxazoline) for the separation of proteins by CE are also discussed.

In this work, a facile approach was developed to modify a fused-silica capillary inner surface based on poly(dopamine) and poly(acrylamide) mixed coatings for protein separation by capillary electrophoresis. The surface morphology, thickness, and chemical components of poly(dopamine)/poly(acrylamide) mixed coatings on glass slides and silicon wafers were studied by atom force microscopy, ellipsometry, and X-ray photoelectron spectroscopy, respectively. The hydrophilicity and stability of the mixed coatings on glass slides were investigated by static water contact angle measurements. A comparative study of electroosmotic flow showed that the poly(dopamine)/poly(acrylamide) mixed coatings could provide effective suppression of electroosmotic flow. Meanwhile, the fast and efficient separations of the mixture of four alkaline proteins, the mixture of acidic, basic, and neutral proteins and egg white proteins were obtained by capillary electrophoresis. Furthermore, the consecutive protein separation runs and low RSDs of migration time demonstrated that these poly(dopamine)/poly(acrylamide) mixed coatings were capable of minimizing protein adsorption during the protein separation by using capillary electrophoresis., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this paper, a novel brush-like copolymer consisting of poly(ethylene glycol) methyl ether methacrylate and 2-aminoethyl methacrylate (AEMA) named as poly(PEGMA300-co-AEMA) was synthesized by atom transfer radical polymerization (ATRP), and then, poly(PEGMA300-co-AEMA) copolymer was immobilized onto material surfaces through polydopamine (PDA)-anchored coating. The defined copolymer structure was characterized by nuclear magnetic resonance hydrogen spectroscopy ((1)H NMR) and gel permeation chromatography (GPC). The chemical component and surface morphology of the brush-like copolymer-graft-PDA coating were studied by using X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM), respectively. The hydrophilicity of the brush-like copolymer-graft-PDA coating was investigated by using static water contact angle. The protein-resistant property of the brush-like copolymer-graft-PDA coating was investigated by using quartz crystal microbalance with dissipation (QCM-D), and finally the coating was applied to capillary inner surface for protein separation by capillary electrophoresis (CE).

This study describes the formation of highly efficient antiprotein adsorption random copolymer coating of poly(N,N-dimethylacrylamide-co-sulfobetaine methacrylate) (poly(DMA-co-SBMA)) on the fused-silica capillary inner wall. Firstly, the poly(DMA-co-SBMA)s with different feed ratio (SBMA/DMA) were synthesized via the reversible addition fragmentation chain transfer polymerization. And then, X-ray photoelectron spectroscopy (XPS) and water contact angle (CA) were used to investigate the composition and hydrophilicity of poly(DMA-co-SBMA) coating formed on the glass slide surfaces. CA measurements revealed that the poly(DMA-co-SBMA) coating became more hydrophilic with the increment of feed ratio (SBMA/DMA), and at the same time, the XPS results showed that the coating ability was also increased with the increment of feed ratio. Followed, the copolymer was applied to coat the fused-silica capillary inner wall, and the coated capillary was used to separate the mixture of proteins (lysozyme, cytochrome c, ribonuclease A, and α-chymotrypsinogen A) in a pH range from 3.0 to 5.0. Under the optimum conditions, an excellent separation of basic proteins with peak efficiencies ranging from 551,000 to 1509,000 N/m had been accomplished within 10 min. Furthermore, the effect of coating composition on protein separation was also investigated through the comparison of separation efficiency achieved by using bare, PSBMA- and poly(DMA-co-SBMA)-coated capillary, respectively.

To stabilize electroosmotic flow (EOF) and suppress protein adsorption onto the silica capillary inner wall, a cationic hydroxyethylcellulose-graft-poly (poly(ethylene glycol) methyl ether methacrylate) (cat-HEC-g-PPEGMA) graft copolymer composed of cationic backbone and bottle brush-like side chains was synthesized for the first time and used as a novel physically adsorbed coating for protein separation by capillary electrophoresis. Reversed (anodal) and very stable EOF was obtained in cat-HEC-g-PPEGMA-coated capillary at pH 2.2-7.8. The effects of degree of cationization, PEGMA grafting ratio, PEGMA molecular mass, and buffer pH on the separation of basic proteins were investigated. A systematic comparative study of protein separation in bare and HEC-coated capillaries and in cat-HEC-g-PPEGMA-coated capillary was also performed. The basic proteins can be well separated in cat-HEC-g-PPEGMA-coated capillary over the pH range of 2.8-6.8 with good repeatability and high separation efficiency, because the coating combines good protein-resistant property of bottle brush-like PPEGMA side chains with excellent coating ability of cat-HEC backbone. Besides its success in separation of basic proteins, the cat-HEC-g-PPEGMA coating was also superior in the fast separation of other protein samples, such as protein mixture, egg white, and saliva, which indicates that it is a promising coating for further proteomics analysis., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel noncovalent adsorbed coating for CE has been prepared and explored. This coating was based on quaternized poly(2-(dimethylamino)ethyl methacrylate)-block-poly(ethylene oxide)-block-poly(2-(dimethylamino)ethyl methacrylate) (QDED) triblock copolymer which was synthesized by atomic transfer radical polymerization (ATRP) in our laboratory. The polycationic polymer and the negatively charged fused-silica surface attracted each other through electrostatic interactions and hydrogen bonds. It was demonstrated that the coated capillaries provided an electroosmotic flow with reverse direction, and the magnitude of the electroosmotic flow can be modulated by varying the molecular mass of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) block and pH value of the buffer. The effects of the molecular mass of PDMAEMA block in QDED triblock copolymer and pH value of the buffer on the separation of basic proteins were investigated in detail. The triblock copolymer coatings showed higher separation efficiency, better migration time repeatability and would apply to wider range of pH than bare fused-silica capillary when used in separating proteins. Proteins from egg white were also separated through this QDED triblock copolymer-coated capillary. These results demonstrated that the QDED triblock copolymer coatings are suitable for analyzing biosamples., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A brush-like copolymer consisting of poly(ethylene glycol) methyl ether methacrylate and N,N-dimethylacrylamide (PEGMA-DMA) was synthesized and used as a novel static physically adsorbed coating for protein separation by capillary electrophoresis for the first time, in order to stabilize electroosmotic flow (EOF) and suppress adsorption of proteins onto the capillary wall. Very stable and low EOF was obtained in PEGMA-DMA-coated capillary at pH 2.2-7.8. The effects of molar ratio of PEGMA to DMA, copolymer molecular mass, and pH on the separation of basic proteins were discussed. A comparative study of bare capillary with PEGMA-DMA-coated capillary for protein separation was also performed. The basic proteins could be well separated in PEGMA-DMA-coated capillary over the investigated pH range of 2.8-6.8 with good repeatability and high separation efficiency because the copolymer coating combines good protein-resistant property of PEG side chains with excellent coating ability of PDMA-contained backbone. Finally, the coating was successfully applied to the fast separation of other protein samples, such as protein mixture and egg white, which reveals that it is a potential coating for further proteomics analysis., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, a novel graft copolymer, hydroxyethylcellulose-graft-poly(2-(dimethylamino)ethyl methacrylate) (HEC-g-PDMAEMA), used as physical coatings of the bare fused-silica capillaries, was synthesized by using ceric ammonium nitrate initiator in aqueous nitric acid solution. EOF measurement results showed that the synthesized HEC-g-PDMAEMA graft copolymer-coated capillary in this paper could suppress EOF effectively compared to the bare fused-silica capillary, and efficient separations of basic proteins were also achieved. The electrical charge of the coated capillary wall could be modulated by varying not only the pH of the running buffer, but also the grafting ratio of poly(2-(dimethylamino)ethyl methacrylate) grafts, which makes possible the analysis of basic and acidic proteins in the same capillary. The effects of poly(2-(dimethylamino)ethyl methacrylate) grafting ratio in HEC-g-PDMAEMA and buffer pH on the separation of basic proteins for capillary electrophoresis were investigated in detail. Furthermore, egg white proteins and milk powder samples were separated by the HEC-g-PDMAEMA-coated capillary. The results demonstrated that the HEC-g-PDMAEMA copolymer coatings have great potential in the field of diagnosis and proteomics., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The antifouling PEG-immobilized capillary was introduced for the protein separation in CE through mussel adhesive protein inspired polydopamine coating for the first time. The polydopamine, formed by spontaneous oxidative polymerization of dopamine at alkaline in the inner surface of capillary, was exploited to immobilize amine-functionalized PEG onto the capillary surface. During the process, polydopamine-graft-PEG copolymer was formed via Michael addition or Schiff base reactions. The polymer coating was observed using X-ray photoelectron spectroscopy and SEM. And both of them indicated the formation of the polymer coating. A comparative study of EOF showed that the novel coating could provide effective suppression of EOF and minimized adsorption of proteins. As a consequence, fast and efficient separations of three proteins such as lysozyme, cytochrome c, and ribonuclease A were obtained within a broad pH range. Furthermore, the long-term stability of polydopamine-graft-PEG coating in consecutive protein separation runs and the high separation efficiency proved that this novel coating was capable of minimizing protein adsorption during the capillary separation. The successful capillary performance also was demonstrated in the separation of protein mixture and milk powder samples at acidic pH.

Quasi-interpenetrating network (quasi-IPN) of linear polyacrylamide (LPA) with low molecular mass and poly(N,N-dimethylacrylamide) (PDMA), which is shown to uniquely combine the superior sieving ability of LPA with the coating ability of PDMA, has been synthesized for application in dsDNA and basic protein separation by CE. The performance of quasi-IPN on dsDNA separation was determined by polymer concentration, electric field strength, LPA molecular masses and different acrylamide (AM) to N,N-dimethylacrylamide (DMA) ratio. The results showed that all fragments in Phix174/HaeIII digest were achieved with a 30 cm effective capillary length at -6 kV at an appropriate polymer solution concentration in bare silica capillaries. Furthermore, EOF measurement results showed that quasi-IPN exhibited good capillary coating ability, via adsorption from aqueous solution, efficiently suppressing EOF. The effect of the buffer pH values on the separation of basic proteins was investigated in detail. The separation efficiencies and analysis reproducibility demonstrated the good potentiality of quasi-IPN matrix for suppressing the adsorption of basic proteins onto the silica capillary wall. In addition, when quasi-IPN was used both as sieving matrix and dynamic coating in bare silica capillaries, higher peak separation efficiencies, and better migration time reproducibility were obtained.

We present cationized hydroxyethylcellulose (cat-HEC) synthesized in our laboratory as a novel physically adsorbed coating for CE. This capillary coating is simple and easy to obtain as it only requires flushing the capillary with polymer aqueous solution. A comparative study with and without polymers was performed. The adsorbed cat-HEC coating exhibited minimal interactions with basic proteins, providing efficient basic protein separations with excellent reproducibility. Under broad pHs, the amine groups are the main charged groups bringing about a global positive charge on the capillary wall. As a consequence, the cat-HEC coating produced an anodal EOF performance. A comparative study on the use of hydroxyethylcellulose (HEC) and cat-HEC as physically adsorbed coatings for CE are also presented. The separation efficiency and analysis reproducibility proved that the cat-HEC polymer was efficient in suppressing the adsorption of basic proteins onto the silica capillary wall. The long-term stability of the cat-HEC coating in consecutive protein separation runs has demonstrated the suitability of the coating for high-throughput electrophoretic protein separations.

BACKGROUND Based on previous research indicating that pedunsaponin A (PA) can destroy the gills of Pomacea canaliculata, we chose the gill as the main research object, and identified the target protein of PA in the gills of P. canaliculata through proteomics and RNA interference (RNAi). RESULTS: Proteomics showed that 180 proteins were downregulated after PA treatment in P. canaliculata. Among them, we chose advillin (PcAdv), receptor type tyrosine protein phosphatase (PcRT) and unconventional myosin heavy chain 6 (PcUM) as candidate target proteins through bioinformatics analysis. The small interfering RNA (siRNA) with the best interference effect was identified through further screening. Gene interference rates were 97%, 98% and 82% for PcAdv, PcRT and PcUM, respectively. The results showed that after RNAi treatment, the mortality of P. canaliculata treated with PcAdv (60.0%) was significantly lower than that for the control (93.3%); histological analysis showed that the structure of the gill was intact, cilia shedding was reduced, and the survival rate of hemocytes had increased. CONCLUSION: These findings indicate that, when the protein was absent or suppressed, the channel for entry of PA into the hemocytes of P. canaliculata was blocked, which reduced PA binding to hemocytes, and that there is a close relationship between shedding of gill cilia and PA entry into hemocytes. PcAdv is thus the key protein in PA destruction of gill cilia. Locating the proteins in gills that interact with drugs and investigating their mode of action is of great importance in the development of new molluscicides to control P. canaliculata populations. [ABSTRACT FROM AUTHOR]

To detect the quality of medicinal human albumin by capillary electrophoresis, we produced a fused-silica capillary coated with thermally cross-linked poly(vinyl pyrrolidone) to prohibit protein adsorption. This type of capillary was easily obtained by injecting an aqueous poly(vinyl pyrrolidone) solution into a fused-silica capillary and thermally annealing it at 200°C. Notably, stable and low electro-osmotic flow was obtained in the poly(vinyl pyrrolidone)-coated capillary at pH 2.20-9.00, and the separation of a mixture of four basic proteins indicated that the poly(vinyl pyrrolidone)-coated capillary exhibits excellent repeatability and separation efficiency; moreover, the separation of these four basic proteins could even be achieved at pH 7.00. The protein recovery percentage of human serum albumin in a single-protein solution and a mixed blood proteins solution was determined to be 97.03 and 95.40% in the poly(vinyl pyrrolidone)50-3 (representing the concentration of the capillary-injected poly(vinyl pyrrolidone) aqueous solution, 50 mg/mL, and thermal annealing time, 3 h) capillary, respectively. Based on these results, we used the poly(vinyl pyrrolidone)50-3-coated capillary to quantify the protein content of human albumin, and the results obtained from run to run, day to day and capillary to capillary demonstrated that the coated capillary could be used for quality testing commercially available human albumin. [ABSTRACT FROM AUTHOR]

A star polymer composed of three poly(ethylene glycol) (PEG) arms and one poly( N,N-dimethyl acrylamide) (PDMA) arm (PEG3-PDMA) was synthesized by amidation and atom-transfer radical polymerization. The structure of PEG3-PDMA was confirmed by 1H-NMR and gel permeation chromatography results. The surface adsorption and protein-resistance behaviors of the star polymer PEG3-PDMA, diblock copolymer PEG-PDMA, and homopolymer PEG were investigated by a quartz crystal microbalance with dissipation. The results indicate that the PEG3-PDMA coating could reduce protein adsorption to 13% at least, more effectively than the PEG-PDMA coating; this indicated that the protein-resistance properties depended on the PEG chain density and surface coverage. If PEG3-PDMA were to be used as the physical coating in capillary zone electrophoresis, it could yield a well-suppressed eletroosmotic flow with greater stability and separate proteins with a lower relative standard deviration (RSD) of protein migration time and a higher separation efficiency than a bare fused-silica capillary in a broad pH range. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

Hydroxyethylcellulose- g-methoxypoly (ethylene glycol) (HEC- g-PEG) graft copolymers were synthesized through the etherification reaction between the hydroxyl group of hydroxyethylcellulose (HEC) and iodinated methoxypoly (ethylene glycol) (PEG-I), which was prepared on the basis of two-step reaction. Fourier transforms infrared spectrum (FTIR), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and iodide oxidation method were used to prove the success of synthesis of graft copolymer. Furthermore, the comparative studies of electro-osmotic flow (EOF) and protein separation in bare-fused silica, HEC and HEC- g-PEG-coated capillary were performed in capillary electrophoresis (CE). The results showed that HEC- g-PEG-coated capillary presented efficient EOF suppression ability and excellent resisting protein adsorption ability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

Abstract: Bacille Calmette-Guerin (BCG)-derived heat shock protein 65 (HSP65) has been demonstrated capable of assisting a fused peptide to generate the peptide-specific cellular immunity. Various HSP65 fusion proteins have been developed as therapeutic cancer vaccines. Purifying a recombinant HSP65 fusion protein with no purification tags for human use is routinely a challenge. Here, we report a scheme for purifying a non-tagged recombinant HSP65-Her2 peptide fusion protein (HSP65-Her2) from Escherichia coli. The HSP65-Her2 is being developed as an immunotherapeutic for the treatment of Her2-positive tumors. After fermentation in a 10-L fermentor, the HSP65-Her2 expressing E. coli were harvested and lysed by sonication. The recombinant HSP65-Her2 was then purified with four successive steps including Butyl-Sepharose FF, DEAE-Sepharose FF, 1% Triton X-114 phase separation and Sephadex G-25. Results showed that HSP65-Her2 was purified up to 97% purity and was able to generate Her2-specific cytotoxic T lymphocytes (CTLs), suggesting that the scheme is efficient for purifying the non-tagged HSP65-Her2 fusion protein with biological activity. [Copyright &y& Elsevier]