Search

Electrochemical power sources, such as polymer electrolyte membrane fuel cells (PEMFCs), require the use of precious metal catalysts which are deposited as nanoparticles onto supports in order to minimize their mass loading and therefore cost. State-of-the-art/commercial supports are based on forms of carbon black. However, carbon supports present disadvantages including corrosion in the operating fuel cell environment and loss of catalyst activity. Here we review recent work examining the potential of different varieties of graphitic carbon nitride (gCN) as catalyst supports, highlighting their likely benefits, as well as the challenges associated with their implementation. The performance of gCN and hybrid gCN-carbon materials as PEMFC electrodes is discussed, as well as their potential for use in alkaline systems and water electrolyzers. We illustrate the discussion with examples taken from our own recent studies. [ABSTRACT FROM AUTHOR]

Although proton exchange membranes (PEMs) are widely deployed in an array of commercial applications, limitations linked to their proton conductivity, water retention, and gas permeability still limit ultimate device performance. While ex situ studies have shown additives can enhance membrane stability and mass transport, to date few have demonstrated that these performance enhancements are maintained when tested in commercially relevant electrochemical technologies, such as fuel cells or electrolyzers. Herein, a new multifunctional additive, 2D poly(triazine imide) (PTI), is demonstrated for composite PEMs, which is shown to boost proton conductivity by 37% under optimal high relative humidity (RH) conditions and 67% at low RHs. PTI also enables major improvements (over 55%) in both current and power densities in industrially relevant PEM fuel cells (PEMFCs). Most importantly, in situ and ex situ characterization suggests that the enhanced performance is due to polymer aggregate‐PTI clusters that form with increasing 2D character and improved long‐range connectivity, while acid‐base interactions with pyridinic nitrogen facilitate the critical proton hopping mechanism at all RHs. Hence, this work offers both a new membrane concept with proven benefits for important electrochemical technologies, as well as design principles for future optimization of proton transport and water management within PEMs. [ABSTRACT FROM AUTHOR]

• Operando synchrotron X-ray study on Phosphorus and Platinum migration. • Graphene-related-material applied as interventional materials for comparison. • X-ray Absorption Near Edge Structure applied to study chemical structural change. • Conducting mechanistic studies via the three-phase interface. • Performance and durability of high-temperature proton exchange membrane fuel cells. The application of high-temperature proton exchange membrane fuel cells (HT-PEMFCs) addresses challenges in water management, fuel purity, and overheating under high current density. However, phosphoric acid (PA) migration hinders their development. This study uses synchrotron-based X-ray fluorescence spectroscopy to investigate PA and catalyst migration. Interventions with single-layer graphene and electrochemically exfoliated graphene oxide improve performance and durability. X-ray absorption spectroscopy provides insights into relevant mechanisms, advancing understanding of membrane electrode assembly preparation and the intricate influences of PA and catalyst migration on performance and durability in HT-PEMFCs. [ABSTRACT FROM AUTHOR]

Polymer electrolyte fuel cells (PEFCs) are a promising replacement for the fossil fuel–dependent automotive and energy sectors. They have become increasingly commercialized in the last decade; however, significant limitations on durability and performance limit their commercial uptake. Catalyst layer (CL) design is commonly reported to impact device power density and durability; although, a consensus is rarely reached due to differences in testing conditions, experimental design, and types of data reported. This is further exacerbated by aspects of CL design such as catalyst support, proton conduction, catalyst, fabrication, and morphology, being significantly interdependent; hence, a wider appreciation is required in order to optimize performance, improve durability, and reduce costs. Here, the cutting‐edge research within the field of PEFCs is reviewed, investigating the effect of different manufacturing techniques, electrolyte distribution, support materials, surface chemistries, and total porosity on power density and durability. These are critically appraised from an applied perspective to inform the most relevant and promising pathways to make and test commercially viable cells. This holistic view of the competing aspects of CL design and preparation will facilitate the development of optimized CLs, especially the incorporation of novel catalyst support materials. [ABSTRACT FROM AUTHOR]

Carbon nitride materials with graphitic to polymeric structures (gCNH) were investigated as catalyst supports for the proton exchange membrane (PEM) water electrolyzers using IrO2 nanoparticles as oxygen evolution electrocatalyst. Here, the performance of IrO2 nanoparticles formed and deposited in situ onto carbon nitride support for PEM water electrolysis was explored based on previous preliminary studies conducted in related systems. The results revealed that this preparation route catalyzed the decomposition of the carbon nitride to form a material with much lower N content. This resulted in a significant enhancement of the performance of the gCNH-IrO2 (or N-doped C-IrO2) electrocatalyst that was likely attributed to higher electrical conductivity of the N-doped carbon support. [ABSTRACT FROM AUTHOR]