Search

This letter proposes a phase-shifted pulse-width modulation (PS-PWM) technique for the flying capacitor (FC) multilevel converter that improves the quality of the line-to-line voltages. In traditional PS-PWM, the line-to-line voltages include intervals that switch between nonadjacent voltage levels, which deteriorates the harmonic performance. The proposed PS-PWM constantly achieves line-to-line voltages with switching transitions between two adjacent levels. The proposed modulation technique is implemented using two sets of $n$ evenly phase-shifted carriers that are alternatively applied depending on the instantaneous value of the reference signal of each phase-leg. Furthermore, it can be implemented in FC multilevel converters with any number of levels while maintaining natural capacitor voltage balance. Experimental results from a four-level FC converter prototype are presented. [ABSTRACT FROM AUTHOR]

This paper proposes and evaluates an active voltage-balancing method for stacked multicell converters (SMCs) using phase-shifted pulse width modulation. The method is easy to implement and can be applied to SMCs with any number of levels. The proposed method balances the voltages of the capacitors by modifying the duty cycle of each switch of the SMC using a proportional controller. The direction of the output current and the crossed effect among the duty cycles of the switches is considered and used to improve capacitor voltage balance. The performance of the proposed voltage-balancing method is verified experimentally for different loads, such as linear and nonlinear loads, and under transient conditions. [ABSTRACT FROM PUBLISHER]

This letter proposes a new implementation of phase-disposition pulse-width modulation (PD-PWM) for multilevel flying capacitor (FC) converters using a single triangular carrier. The proposed implementation is much simpler than conventional PD-PWM techniques based on multiple trapezoidal-shaped carriers, generates the same results as far as natural capacitor voltage balance is concerned and offers better quality line-to-line voltages when compared to phase-shifted PWM. The proposed algorithm is based on reshaping the reference signal to fit within the range of a single carrier and assigning each crossing of the reference signal with the carrier to a particular pair of switches at any time. The proposed algorithm is suitable for digital implementation taking maximum benefit from the PWM units available in the processor. Simulation and experimental results are presented from the five-level FC converter to verify the proposed PD-PWM implementation. [ABSTRACT FROM AUTHOR]

This paper proposes a voltage balancing method for flying capacitor multilevel converters based on phase-disposition pulse width modulation (PD-PWM) using optimal transitions between converter switching states. The optimal transitions between converter switching states are possible due to the converter states' redundancy and are decided with the continuous evaluation and minimization of a cost function. Simulation and experimental results verify the robustness of the proposed voltage balancing method against different load conditions. A significant reduction of the average switching frequency is achieved, when compared to the use of the optimal state voltage balancing method, where the optimal states are decided independently for each voltage level ignoring how transitions impact on the converter switching frequency. Moreover, the line-to-line output voltages are compared with the ones obtained with other modulation techniques in terms of total harmonic distortion values, and PD-PWM with the proposed voltage balancing method produces the best results. [ABSTRACT FROM AUTHOR]

This paper proposes a voltage balancing method for a flying capacitor multilevel converter based on the phase-disposition sinusoidal pulsewidth modulation (PD-SPWM). This voltage balancing method uses redundant switching states, which are determined by the minimization of a cost function. The implementation of the PD-SPWM using standard triangular carriers leads to additional switching events that are due to the transitions within the same voltage level, thus increasing the switching frequency of the power devices. Such drawback can be avoided by using sawtooth carrier waveforms. Another characteristic of the proposed voltage balancing method is that it does not require the tuning of parameters to achieve optimal performance. Simulation and experimental results confirm the robustness of the proposed method operating with different loads and transient conditions. [ABSTRACT FROM PUBLISHER]

Multilevel flying capacitor (FC) converters provide natural capacitor voltage balance under phase-shifted pulse width modulation (PS-PWM). However, natural balancing may not be robust enough to maintain the voltages at the reference values, especially under certain transient conditions. Furthermore, natural balancing dynamics depend on the load and it may be very slow in some practical applications. Therefore, a more robust balancing mechanism of maintaining the FC voltages at the desired values is required. This paper proposes a new closed-loop voltage-balancing method for the multilevel FC converters using PS-PWM. The proposed method balances the voltages of the FCs by modifying the duty cycle of each switch of the FC converter using a proportional controller. The crossed effect between FC currents and duty cycles is considered and is used for optimal FC voltage balancing. Simulation and experimental results verify that the proposed voltage-balancing method is very robust to different operating conditions, such as load transients, linear/nonlinear and unbalanced loads. [ABSTRACT FROM AUTHOR]