Search

Trajectory optimization is a familiar method for most of re-entry and Re-usable vehicles. This is because of the ability to include almost all of the problem constraints without facing restrictions such as time & Calculation issues. Adding or removing constraints in trajectory optimization problem has significant effects on overall optimization performance which even can upgrade the method to an on-line process. Most of optimization Algorithms such as nonlinear-programming need an initial guess and are also sensitive to it. Hence in this research management of initial guess is done to remove some constraints from optimization problem and transfer them to initial phase. Accordingly an effort is conducted through using a classic guidance method to satisfy constraints of distance error and angle of impact command. The output of guidance initial guess is then fed to the optimization problem. 6Dof Simulation results show the increase of optimization performance via reduced number of iterations and Optimization time and increased solution accuracy.

Halo orbits are of importance for observation and study of the space due to their specific characteristics including the orbital position and the periodic motion. In this regards, present paper has focused on optimal trajectory planning to transfer to halo orbits. To this aim, homotopy approach has been adopted for optimal trajectory design. This approach has improved the convergence rate and insensitivity of the problem to initial guess. The designed trajectory transfers a spacecraft orbiting the Earth to a Halo orbit around Lagrangian point L1 of the Earth-moon restricted three-body system. The propulsion system has been assumed to be low thrust with constant specific impulse. Homotopy approach has a broad domain of applicability and methods in which continuation method has been employed here among them. The optimal designed trajectory minimizes the fuel consumption via transforming solution of the minimum energy problem utilizing the homotopy approach. This approach simplifies solution of the complex problem of minimum fuel indeed.

The optimal Earth-Moon transfer trajectory considering spacecraft’s visibility from the Daejeon ground station visibility at both the trans lunar injection (TLI) and lunar orbit insertion (LOI) maneuvers is designed. Both the TLI and LOI maneuvers are assumed to be impulsive thrust. As the successful execution of the TLI and LOI maneuvers are crucial factors among the various lunar mission parameters, it is necessary to design an optimal lunar transfer trajectory which guarantees the visibility from a specified ground station while executing these maneuvers. The optimal Earth-Moon transfer trajectory is simulated by modifying the Korean Lunar Mission Design Software using Impulsive high Thrust Engine (KLMDS-ITE) which is developed in previous studies. Four different mission scenarios are established and simulated to analyze the effects of the spacecraft’s visibility considerations at the TLI and LOI maneuvers. As a result, it is found that the optimal Earth-Moon transfer trajectory, guaranteeing the spacecraft’s visibility from Daejeon ground station at both the TLI and LOI maneuvers, can be designed with slight changes in total amount of delta-Vs. About 1% difference is observed with the optimal trajectory when none of the visibility condition is guaranteed, and about 0.04% with the visibility condition is only guaranteed at the time of TLI maneuver. The spacecraft’s mass which can delivered to the Moon, when both visibility conditions are secured is shown to be about 534 kg with assumptions of KSLV-2’s on-orbit mass about 2.6 tons. To minimize total mission delta-Vs, it is strongly recommended that visibility conditions at both the TLI and LOI maneuvers should be simultaneously implemented to the trajectory optimization algorithm.