Search

This work aims to present the results of evaluating the coloristic properties of polylactic acid (PLA) fibers. PLA is common nowadays in much research, as it is a biodegradable plastic from renewable sources. However, little research is devoted to PLA fibers, and even less to applied research of colored fibers. The prepared color masterbatches, created using inorganic pigments, such as titanium dioxide and carbon black, were subsequently used to prepare dyed PLA fibers in mass. The fibers were drawn to the maximum drawn ratio. The properties of the pure and dyed fibers were investigated before and after accelerated light aging using Q-SUN equipment. The changes were recorded by Fourier Transform Infrared (FTIR) spectroscopy and colorimetric properties were recorded using a device spectrometer from TECHKON SpectroDens. We also evaluated thermal properties from the first heating via differential scanning calorimetry (DSC). The measurements were taken before and after the aging of the PLA fibers, in order to see the effect of aging on the supermolecular structure, excluding the influence of the preparation process and the influence of the kind of PLA. Using inorganic pigments showed sufficient color stability even after accelerated light aging, which is beneficial for using colored fibers in practice.

The aim of this paper is to present the influence of the modification of polypropylene (PP) fibers on the sorption capabilities of the fibers. The physical modification of the PP fibers was made with inorganic nanoadditives in the mass, with a view to improving the properties of silicate composites used in the construction industry. The compositions of the modified PP fibers using two different nanoadditives were based on previous work, as well as the work presented in this paper. The prepared modified PP fibers were compared with pure PP fibers, and their mechanical and thermomechanical properties were evaluated. Another task of this work was to evaluate and compare the sorption capabilities of these fibers without the preparation of concrete blocks. Therefore, the Washburn method was used. However, the obtained results led us to the conclusion that the given method points to the excellent transport properties of PP fibers if such properties are used to evaluate the sorption of the fibers. However, the sorption of the prepared modified fibers could be associated with the nanoadditives used, which have a higher water sorption capacity compared to pure PP fibers, and this could also ensure the higher adhesion of the modified PP fibers with inorganic additives to the cement matrix compared to the adhesion of the hydrophobic PP fibers.