Search

Optical real-time data processing is advancing fields like tensor algebra acceleration, cryptography, and digital holography. This technology offers advantages such as reduced complexity through optical fast Fourier transform and passive dot-product multiplication. In this study, the proposed Reconfigurable Complex Convolution Module (RCCM) is capable of independently modulating both phase and amplitude over two million pixels. This research is relevant for applications in optical computing, hardware acceleration, encryption, and machine learning, where precise signal modulation is crucial. We demonstrate simultaneous amplitude and phase modulation of an optical two-dimensional signal in a thin lens’s Fourier plane. Utilizing two spatial light modulators (SLMs) in a Michelson interferometer placed in the focal plane of two Fourier lenses, our system enables full modulation in a 4F system’s Fourier domain. This setup addresses challenges like SLMs’ non-linear inter-pixel crosstalk and variable modulation efficiency. The integration of these technologies in the RCCM contributes to the advancement of optical computing and related fields.

Metalenses are emerging as an alternative to digital micromirror devices (DMDs), with the advantages of compactness and flexibility. The exploration of metalenses has ignited enthusiasm among optical engineers, positioning them as the forthcoming frontier in technology. In this paper, we advocate for the implementation of the phase-change material, Sb2Se3, capable of providing swift, reversible, non-volatile focusing and defocusing within the 1550 nm telecom spectrum. The lens, equipped with a robust ITO microheater, offers unparalleled functionality and constitutes a significant step toward dynamic metalenses that can be integrated with beamforming applications. After a meticulously conducted microfabrication process, we showcase a device capable of rapid tuning (0.1 MHz level) for metalens focusing and defocusing at C band communication, achieved by alternating the PCM state between the amorphous and crystalline states. The findings from the experiment show that the device has a high contrast ratio for switching of 28.7 dB.

Van der Waals (vdWs) heterostructures, assembled by stacking of two-dimensional (2D) crystal layers, have emerged as a promising new material system for high-performance optoelectronic applications, such as thin film transistors, photodetectors, and light-emitters. In this study, we showcase an innovative device that leverages strain-tuning capabilities, utilizing a MoS2/Sb2Te3 vdWs p-n heterojunction architecture designed explicitly for photodetection across the visible to near-infrared spectrum. These heterojunction devices provide ultra-low dark currents as small as 4.3 pA, a robust photoresponsivity of 0.12 A W−1, and reasonable response times characterized by rising and falling durations of 0.197 s and 0.138 s, respectively. These novel devices exhibit remarkable tunability under the application of compressive strain up to 0.3%. The introduction of strain at the heterojunction interface influences the bandgap of the materials, resulting in a significant alteration of the heterojunction’s band structure. This subsequently shifts the detector’s optical absorption properties. The proposed strategy of strain-induced engineering of the stacked 2D crystal materials allows the tuning of the electronic and optical properties of the device. Such a technique enables fine-tuning of the optoelectronic performance of vdWs devices, paving the way for tunable high-performance, low-power consumption applications. This development also holds significant potential for applications in wearable sensor technology and flexible electro-optic circuits.