Search

Fabrication of quantum processors in advanced 300 mm wafer-scale complementary metal-oxide-semiconductor (CMOS) foundries provides a unique scaling pathway towards commercially viable quantum computing with potentially millions of qubits on a single chip. Here, we show precise qubit operation of a silicon two-qubit device made in a 300 mm semiconductor processing line. The key metrics including single- and two-qubit control fidelities exceed 99% and state preparation and measurement fidelity exceeds 99.9%, as evidenced by gate set tomography (GST). We report coherence and lifetimes up to $T_\mathrm{2}^{\mathrm{*}} = 30.4$ $\mu$s, $T_\mathrm{2}^{\mathrm{Hahn}} = 803$ $\mu$s, and $T_1 = 6.3$ s. Crucially, the dominant operational errors originate from residual nuclear spin carrying isotopes, solvable with further isotopic purification, rather than charge noise arising from the dielectric environment. Our results answer the longstanding question whether the favourable properties including high-fidelity operation and long coherence times can be preserved when transitioning from a tailored academic to an industrial semiconductor fabrication technology., Comment: 10 pages, 4 figures, 4 extended data figures

Superior computational power promised by quantum computers utilises the fundamental quantum mechanical principle of entanglement. However, achieving entanglement and verifying that the generated state does not follow the principle of local causality has proven difficult for spin qubits in gate-defined quantum dots, as it requires simultaneously high concurrence values and readout fidelities to break the classical bound imposed by Bell's inequality. Here we employ heralded initialization and calibration via gate set tomography (GST), to reduce all relevant errors and push the fidelities of the full 2-qubit gate set above 99 %, including state preparation and measurement (SPAM). We demonstrate a 97.17 % Bell state fidelity without correcting for readout errors and violate Bell's inequality with a Bell signal of S = 2.731 close to the theoretical maximum of $2\sqrt{2}$. Our measurements exceed the classical limit even at elevated temperatures of 1.1 K or entanglement lifetimes of 100 $\mu s$., Comment: 19 pages, 5 main figures, 9 extended data figures

Silicon quantum computing has the potential to revolutionize technology with capabilities to solve real-life problems that are computationally complex or even intractable for modern computers [1] by offering sufficient high quality qubits to perform complex error-corrected calculations. Silicon metal-oxide-semiconductor based quantum dots present a promising pathway for realizing practical quantum computers. To improve certain qubit properties, it is a common strategy to incorporate multiple electrons in the same dot in order to form qubits in higher confined orbital states. Theoretical modelling is an essential part of understanding the quantum behaviour of these electrons, providing a basis for validating the physical working of device models as well as providing insights into experimental data. Hartree-Fock theory is an imperative tool for the electronic structure modelling of multi-electron quantum dots due to its ability to simulate a large number of electrons with manageable computation load. However, an efficient calculation of the self-consistent field becomes hard because dot formations in silicon are characterized by strong electron-electron interactions and conduction band valleys, besides the relatively high comparative effective mass, which add to create a behaviour dominated by repulsion between electrons rather than a well established shell structure. In this paper, we present a Hartree-Fock-based method that accounts for these complexities for the modelling of silicon quantum dots. With this method, we first establish the significance of including electron-electron interactions and valley degree of freedom and their implications. We then explore a simple case of anisotropic dots and observe the impact of anisotropy on dot formations.

Coherently dressed spins have shown promising results as building blocks for future quantum computers owing to their resilience to environmental noise and their compatibility with global control fields. This mode of operation allows for more amenable qubit architecture requirements and simplifies signal routing on the chip. However, multi-qubit operations, such as qubit addressability and two-qubit gates, are yet to be demonstrated to establish global control in combination with dressed qubits as a viable path to universal quantum computing. Here we demonstrate simultaneous on-resonance driving of degenerate qubits using a global field while retaining addressability for qubits with equal Larmor frequencies. Furthermore, we implement SWAP oscillations during on-resonance driving, constituting the demonstration of driven two-qubit gates. Significantly, our findings highlight the fragility of entangling gates between superposition states and how dressing can increase the noise robustness. These results represent a crucial milestone towards global control operation with dressed qubits. It also opens a door to interesting spin physics on degenerate spins.

In a full-scale quantum computer with a fault-tolerant architecture, having scalable, long-range interaction between qubits is expected to be a highly valuable resource. One promising method of achieving this is through the light-matter interaction between spins in semiconductors and photons in superconducting cavities. This paper examines the theory of both transverse and longitudinal spin-photon coupling and their applications in the silicon metal-oxide-semiconductor (SiMOS) platform. We propose a method of coupling which uses the intrinsic spin-orbit interaction arising from orbital degeneracies in SiMOS qubits. Using theoretical analysis and experimental data, we show that the strong coupling regime is achievable in the transverse scheme. We also evaluate the feasibility of a longitudinal coupling driven by an AC modulation on the qubit. These coupling methods eschew the requirement for an external micromagnet, enhancing prospects for scalability and integration into a large-scale quantum computer.

The encoding of qubits in semiconductor spin carriers has been recognised as a promising approach to a commercial quantum computer that can be lithographically produced and integrated at scale. However, the operation of the large number of qubits required for advantageous quantum applications will produce a thermal load exceeding the available cooling power of cryostats at millikelvin temperatures. As the scale-up accelerates, it becomes imperative to establish fault-tolerant operation above 1 kelvin, where the cooling power is orders of magnitude higher. Here, we tune up and operate spin qubits in silicon above 1 kelvin, with fidelities in the range required for fault-tolerant operation at such temperatures. We design an algorithmic initialisation protocol to prepare a pure two-qubit state even when the thermal energy is substantially above the qubit energies, and incorporate radio-frequency readout to achieve fidelities up to 99.34 per cent for both readout and initialisation. Importantly, we demonstrate a single-qubit Clifford gate fidelity of 99.85 per cent, and a two-qubit gate fidelity of 98.92 per cent. These advances overcome the fundamental limitation that the thermal energy must be well below the qubit energies for high-fidelity operation to be possible, surmounting a major obstacle in the pathway to scalable and fault-tolerant quantum computation.

High fidelity qubit readout is critical in order to obtain the thresholds needed to implement quantum error correction protocols and achieve fault-tolerant quantum computing. Large-scale silicon qubit devices will have densely-packed arrays of quantum dots with multiple charge sensors that are, on average, farther away from the quantum dots, entailing a reduction in readout fidelities. Here, we present a readout technique that enhances the readout fidelity in a linear SiMOS 4-dot array by amplifying correlations between a pair of single-electron transistors, known as a twin SET. By recording and subsequently correlating the twin SET traces as we modulate the dot detuning across a charge transition, we demonstrate a reduction in the charge readout infidelity by over one order of magnitude compared to traditional readout methods. We also study the spin-to-charge conversion errors introduced by the modulation technique, and conclude that faster modulation frequencies avoid relaxation-induced errors without introducing significant spin flip errors, favouring the use of the technique at short integration times. This method not only allows for faster and higher fidelity qubit measurements, but it also enhances the signal corresponding to charge transitions that take place farther away from the sensors, enabling a way to circumvent the reduction in readout fidelities in large arrays of qubits.

The boom of semiconductor quantum computing platforms created a demand for computer-aided design and fabrication of quantum devices. Path integral Monte Carlo (PIMC) can have an important role in this effort because it intrinsically integrates strong quantum correlations that often appear in these multi-electron systems. In this paper we present a PIMC algorithm that estimates exchange interactions of three-dimensional electrically defined quantum dots. We apply this model to silicon metal-oxide-semiconductor (MOS) devices and we benchmark our method against well-tested full configuration interaction (FCI) simulations. As an application, we study the impact of a single charge trap on two exchanging dots, opening the possibility of using this code to test the tolerance to disorder of CMOS devices. This algorithm provides an accurate description of this system, setting up an initial step to integrate PIMC algorithms into development of semiconductor quantum computers., Comment: 10 pages , 5 figures

Spins of electrons in CMOS quantum dots combine exquisite quantum properties and scalable fabrication. In the age of quantum technology, however, the metrics that crowned Si/SiO2 as the microelectronics standard need to be reassessed with respect to their impact upon qubit performance. We chart the spin qubit variability due to the unavoidable atomic-scale roughness of the Si/SiO$_2$ interface, compiling experiments in 12 devices, and developing theoretical tools to analyse these results. Atomistic tight binding and path integral Monte Carlo methods are adapted for describing fluctuations in devices with millions of atoms by directly analysing their wavefunctions and electron paths instead of their energy spectra. We correlate the effect of roughness with the variability in qubit position, deformation, valley splitting, valley phase, spin-orbit coupling and exchange coupling. These variabilities are found to be bounded and lie within the tolerances for scalable architectures for quantum computing as long as robust control methods are incorporated., Comment: 20 pages, 8 figures

Achieving high-fidelity entangling operations between qubits consistently is essential for the performance of multi-qubit systems and is a crucial factor in achieving fault-tolerant quantum processors. Solid-state platforms are particularly exposed to errors due to materials-induced variability between qubits, which leads to performance inconsistencies. Here we study the errors in a spin qubit processor, tying them to their physical origins. We leverage this knowledge to demonstrate consistent and repeatable operation with above 99% fidelity of two-qubit gates in the technologically important silicon metal-oxide-semiconductor (SiMOS) quantum dot platform. We undertake a detailed study of these operations by analysing the physical errors and fidelities in multiple devices through numerous trials and extended periods to ensure that we capture the variation and the most common error types. Physical error sources include the slow nuclear and electrical noise on single qubits and contextual noise. The identification of the noise sources can be used to maintain performance within tolerance as well as inform future device fabrication. Furthermore, we investigate the impact of qubit design, feedback systems, and robust gates on implementing scalable, high-fidelity control strategies. These results are achieved by using three different characterization methods, we measure entangling gate fidelities ranging from 96.8% to 99.8%. Our analysis tools identify the causes of qubit degradation and offer ways understand their physical mechanisms. These results highlight both the capabilities and challenges for the scaling up of silicon spin-based qubits into full-scale quantum processors.

The small size and excellent integrability of silicon metal-oxide-semiconductor (SiMOS) quantum dot spin qubits make them an attractive system for mass-manufacturable, scaled-up quantum processors. Furthermore, classical control electronics can be integrated on-chip, in-between the qubits, if an architecture with sparse arrays of qubits is chosen. In such an architecture qubits are either transported across the chip via shuttling, or coupled via mediating quantum systems over short-to-intermediate distances. This paper investigates the charge and spin characteristics of an elongated quantum dot -- a so-called jellybean quantum dot -- for the prospects of acting as a qubit-qubit coupler. Charge transport, charge sensing and magneto-spectroscopy measurements are performed on a SiMOS quantum dot device at mK temperature, and compared to Hartree-Fock multi-electron simulations. At low electron occupancies where disorder effects and strong electron-electron interaction dominate over the electrostatic confinement potential, the data reveals the formation of three coupled dots, akin to a tunable, artificial molecule. One dot is formed centrally under the gate and two are formed at the edges. At high electron occupancies, these dots merge into one large dot with well-defined spin states, verifying that jellybean dots have the potential to be used as qubit couplers in future quantum computing architectures.

One of the key pathways towards scalability of spin-based quantum computing systems lies in achieving long-range interactions between electrons and increasing their inter-connectivity. Coherent spin transport is one of the most promising strategies to achieve this architectural advantage. Experimental results have previously demonstrated high fidelity transportation of spin qubits between two quantum dots in silicon and identified possible sources of error. In this theoretical study, we investigate these errors and analyze the impact of tunnel coupling, magnetic field and spin-orbit effects on the spin transfer process. The interplay between these effects gives rise to double dot configurations that include regimes of enhanced decoherence that should be avoided for quantum information processing. These conclusions permit us to extrapolate previous experimental conclusions and rationalize the future design of large scale quantum processors., Comment: 18 pages, 9 figures

Once called a "classically non-describable two-valuedness" by Pauli , the electron spin is a natural resource for long-lived quantum information since it is mostly impervious to electric fluctuations and can be replicated in large arrays using silicon quantum dots, which offer high-fidelity control. Paradoxically, one of the most convenient control strategies is the integration of nanoscale magnets to artificially enhance the coupling between spins and electric field, which in turn hampers the spin's noise immunity and adds architectural complexity. Here we demonstrate a technique that enables a \emph{switchable} interaction between spins and orbital motion of electrons in silicon quantum dots, without the presence of a micromagnet. The naturally weak effects of the relativistic spin-orbit interaction in silicon are enhanced by more than three orders of magnitude by controlling the energy quantisation of electrons in the nanostructure, enhancing the orbital motion. Fast electrical control is demonstrated in multiple devices and electronic configurations, highlighting the utility of the technique. Using the electrical drive we achieve coherence time $T_{2,{\rm Hahn}}\approx50 \mu$s, fast single-qubit gates with ${T_{\pi/2}=3}$ ns and gate fidelities of 99.93 % probed by randomised benchmarking. The higher gate speeds and better compatibility with CMOS manufacturing enabled by on-demand electric control improve the prospects for realising scalable silicon quantum processors.

The implementation of high fidelity two-qubit gates is a bottleneck in the progress towards universal quantum computation in semiconductor quantum dot qubits. We study capacitive coupling between two triple quantum dot spin qubits encoded in the $S = 1/2$, $S_z = -1/2$ decoherence-free subspace -- the exchange-only (EO) spin qubits. We report exact gate sequences for CPHASE and CNOT gates, and demonstrate theoretically, the existence of multiple two-qubit sweet spots (2QSS) in the parameter space of capacitively coupled EO qubits. Gate operations have the advantage of being all-electrical, but charge noise that couple to electrical parameters of the qubits cause decoherence. Assuming noise with a 1/f spectrum, two-qubit gate fidelities and times are calculated, which provide useful information on the noise threshold necessary for fault-tolerance. We study two-qubit gates at single and multiple parameter 2QSS. In particular, for two existing EO implementations -- the resonant exchange (RX) and the always-on exchange-only (AEON) qubits -- we compare two-qubit gate fidelities and times at positions in parameter space where the 2QSS are simultaneously single-qubit sweet spots (1QSS) for the RX and AEON. These results provide a potential route to the realization of high fidelity quantum computation., Comment: Main text (16 pages, 6 figures). Supplementary material (24 pages, 6 figures)

We propose two schemes to coherently transfer arbitrary quantum states of the two-electron singlet-triplet qubit across a chain of 3 quantum dots. The schemes are based on electrical control over the detuning energy of the quantum dots. The first is a pulse-gated scheme, requiring dc pulses and engineering of inter- and intra-dot Coulomb energies. The second scheme is based on the adiabatic theorem, requiring time-dependent control of the detuning energy through avoided crossings at a rate that the system remains in the ground state. We simulate the transfer fidelity using typical experimental parameters for silicon quantum dots. Our results give state transfer fidelities between $94.3\% < \mathcal{F} < 99.5\%$ at sub-ns gate times for the pulse-gated scheme and between $75.4\% < \mathcal{F} < 99.0 \%$ at tens of ns for the adiabatic scheme. Taking into account dephasing from charge noise, we obtain state transfer fidelities between $94.0\% < \mathcal{F} < 99.2\%$ for the pulse-gated scheme and between $64.9\% < \mathcal{F} < 93.6\%$ for the adiabatic scheme., Comment: Includes text and supplemental material, 11 Pages, 6 figures